Equivalent & Substitute Parts for K152J15C0GF53L2

Part Overview

Manufacturer part number K152J15C0GF53L2 from Vishay Beyschlag/Draloric/BC Components is categorized as a 1500 pF ±5% 50V ceramic capacitor with C0G/NP0 temperature coefficient in a radial through-hole package. The part status is active, with inventory available. Identifying alternative models is essential for ensuring supply chain resilience and design flexibility, especially when managing bulk inventory, accommodating mechanical constraints, or confirming sole-sourced components in general purpose capacitor applications.

Substiute Parts

K152J15C0GF53L2

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 810K152J15C0GF53L2 Datasheet

Current PartRFQ

C322C152J5G5TA

KEMETIn Stock: 878C322C152J5G5TA Datasheet

MFR RecommendedRFQ

RDE5C1H152J0K1H03B

Murata ElectronicsIn Stock: 2087RDE5C1H152J0K1H03B Datasheet

MFR RecommendedRFQ

RDE5C1H152J0P1H03B

Murata ElectronicsIn Stock: 2120RDE5C1H152J0P1H03B Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are identified strictly by matching key criteria: capacitance value (1500 pF), tolerance (±5%), rated voltage (50V), temperature coefficient (C0G, NP0), operating temperature range (-55°C ~ 125°C), mounting type (through hole), and package/case format (radial). Lead spacing and style are also referenced to ensure mechanical compatibility. Only parts with explicit matches on these parameters are considered suitable substitutes for K152J15C0GF53L2 in ceramic capacitor applications.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts hold an active product status and meet the electrical and mechanical parameters specified for K152J15C0GF53L2. ROHS3 compliance and REACH unaffected status are documented for KEMET C322C152J5G5TA and Murata RDE5C1H series substitutes. Component selection among substitutes can proceed based on matching inventory, compliance documentation, and packaging, per provided data.

Frequently Asked Questions (FAQ)

Q1: What electrical criteria must substitute ceramic capacitors meet for equivalency?
A1: Substitute ceramic capacitors must match capacitance (1500 pF), tolerance (±5%), voltage rating (50V), and temperature coefficient (C0G, NP0).

Q2: Is package style important when selecting a substitute for K152J15C0GF53L2?
A2: Yes. Substitution requires alignment in mounting type (through hole), package case (radial), and lead spacing/style as per application mechanical constraints.

Q3: Are there environmental or compliance considerations in substitute selection?
A3: RoHS3 compliance and REACH status are confirmed for substitutes where specified, suitable for regulated commercial applications.

Q4: Can lead style differences affect mechanical compatibility?
A4: Lead style (straight, formed, formed/kinked) should match the requirements of the intended PCB layout and assembly process, as provided.

Q5: How is substitute suitability confirmed within the defined category?
A5: Suitability is determined strictly by matching all explicit key parameters (electrical, mechanical, mounting type, compliance) provided for this product category.