K150K15C0GF53L2 Equivalent & Substitute Parts

Part Overview

The K150K15C0GF53L2 is a 15 pF ceramic capacitor with ±10% tolerance, rated for 50V operation, featuring C0G/NP0 temperature coefficient characteristics. This radial through-hole component is manufactured by Vishay Beyschlag/Draloric/BC Components under the Mono-Kap™ K series and maintains Active product status. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the allowed parameter specifications for this ceramic capacitor category.

Substiute Parts

K150K15C0GF53L2

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 795K150K15C0GF53L2 Datasheet

Current PartRFQ

K150J15C0GF53L2

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 26003K150J15C0GF53L2 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the K150K15C0GF53L2 is determined by strict equivalence in the following critical parameters: capacitance value (15 pF), voltage rating (50V), temperature coefficient (C0G/NP0), mounting type (Through Hole), package configuration (Radial), and lead spacing (2.50mm). Tolerance variation is permitted within the allowed electrical specifications for this component category, provided the substitute maintains the same physical footprint and electrical performance envelope. All substitute parts must retain Active product status and ROHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

The K150J15C0GF53L2 serves as a direct substitute for the K150K15C0GF53L2. Both components are manufactured by Vishay Beyschlag/Draloric/BC Components within the Mono-Kap™ K series and maintain Active product status. The substitute part provides tighter tolerance specification (±5% versus ±10%), which represents an upgrade in capacitance accuracy while maintaining identical electrical ratings, physical dimensions, and compliance certifications. Both parts are ROHS3 compliant and REACH unaffected, ensuring regulatory compatibility in equivalent applications.

Frequently Asked Questions (FAQ)

Q: Can K150J15C0GF53L2 replace K150K15C0GF53L2 in existing designs?

A: Yes. Both parts share identical capacitance (15 pF), voltage rating (50V), temperature coefficient (C0G/NP0), physical dimensions (4.00mm x 2.60mm), and lead spacing (2.50mm). The substitute features improved tolerance specification (±5% versus ±10%).

Q: What is the difference between these two part numbers?

A: The primary difference is tolerance specification. K150K15C0GF53L2 carries ±10% tolerance, while K150J15C0GF53L2 carries ±5% tolerance. All other electrical and mechanical parameters remain equivalent.

Q: Are the physical packages identical?

A: Yes. Both components use radial through-hole packaging with identical dimensions (0.157" L x 0.102" W) and lead spacing (0.098" / 2.50mm), ensuring direct PCB footprint compatibility.

Q: Do both parts meet the same compliance standards?

A: Yes. Both K150K15C0GF53L2 and K150J15C0GF53L2 are ROHS3 compliant and REACH unaffected, meeting equivalent regulatory requirements.

Q: Which part should be selected for new designs?

A: Selection depends on tolerance requirements. For applications requiring tighter capacitance accuracy, K150J15C0GF53L2 (±5%) is appropriate. For general-purpose applications where ±10% tolerance is acceptable, either part is suitable based on availability and cost considerations.