K150K10C0GF53L2 Equivalent & Substitute Parts

Part Overview

The K150K10C0GF53L2 is a 15 pF ceramic capacitor with ±10% tolerance, rated for 50V operation, featuring C0G/NP0 temperature coefficient characteristics. This radial through-hole component is manufactured by Vishay Beyschlag/Draloric/BC Components under the Mono-Kap™ K series and maintains Active product status. Substitute parts are identified when equivalent electrical performance can be maintained while accommodating design flexibility, inventory availability, or specific tolerance requirements within the allowed parameter ranges for this capacitor category.

Substiute Parts

K150K10C0GF53L2

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1062K150K10C0GF53L2 Datasheet

Current PartRFQ

K150J15C0GF53L2

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 26003K150J15C0GF53L2 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the K150K10C0GF53L2 is determined by the following critical parameters:

Capacitance value must remain 15 pF. Voltage rating must be equal to or greater than 50V. Temperature coefficient must be C0G or NP0. Operating temperature range must encompass -55°C to 125°C. Mounting type must be Through Hole with Radial package configuration. Lead spacing must be 0.098" (2.50mm) to ensure PCB compatibility. RoHS3 compliance is required.

The K150J15C0GF53L2 qualifies as a substitute because it maintains identical capacitance, voltage rating, temperature coefficient, operating temperature range, mounting type, package style, and lead spacing. The tolerance specification differs at ±5% versus ±10%, representing a tighter tolerance that is functionally compatible with applications designed for the original part.

Parameter Comparison

Engineering Selection Recommendations

Both the K150K10C0GF53L2 and K150J15C0GF53L2 maintain Active product status and ROHS3 compliance. The K150J15C0GF53L2 provides improved tolerance performance at ±5%, which may be advantageous in precision applications where tighter capacitance control is beneficial. Physical dimensions differ slightly between the two parts; the K150J15C0GF53L2 has marginally larger length and height specifications. Selection between these parts should be based on tolerance requirements, available inventory, and PCB layout constraints. Both parts are electrically and mechanically interchangeable within the specified parameter boundaries.

Frequently Asked Questions (FAQ)

Q: Can K150J15C0GF53L2 replace K150K10C0GF53L2 in existing designs?

A: Yes. Both parts share identical capacitance (15 pF), voltage rating (50V), temperature coefficient (C0G/NP0), operating temperature range (-55°C to 125°C), mounting type (Through Hole), package style (Radial), and lead spacing (0.098"). The K150J15C0GF53L2 features tighter tolerance (±5% versus ±10%), which is functionally compatible.

Q: Are there physical size differences between these parts?

A: Yes. The K150K10C0GF53L2 measures 0.142" L x 0.091" W with 0.205" maximum seated height. The K150J15C0GF53L2 measures 0.157" L x 0.102" W with 0.220" maximum seated height. Both maintain identical 0.098" lead spacing. Verify PCB layout clearances before substitution.

Q: Do both parts meet the same compliance standards?

A: Yes. Both K150K10C0GF53L2 and K150J15C0GF53L2 are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with HTSUS code 8532.24.0060.

Q: What is the tolerance difference and does it matter?

A: The K150K10C0GF53L2 has ±10% tolerance while K150J15C0GF53L2 has ±5% tolerance. The tighter tolerance of the substitute part provides improved capacitance accuracy. Applications requiring loose tolerance specifications can use either part; applications requiring tighter tolerance control benefit from the K150J15C0GF53L2.