JR25WCC-10 Circular Connector Cable Clamp Equivalent & Substitute Parts

Part Overview

The JR25WCC-10 is a black connector cable clamp for M28x0.75 threaded applications within the JR-W series circular connector family manufactured by Hirose Electric Co Ltd. This component provides cable strain relief and environmental sealing with IP67 ingress protection rating. The main part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this specific cable clamp configuration.

Substiute Parts

JR25WCC-10

Hirose Electric Co LtdIn Stock: 1032JR25WCC-10 Datasheet

Current PartRFQ

JR25WCC-10(71)

Hirose Electric Co LtdIn Stock: 1402JR25WCC-10(71) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the JR25WCC-10 is determined by strict equivalence across the following critical parameters:

• Shell Size - Insert: 25
• Thread Size: M28x0.75
• Cable Opening: 0.394" (10.00mm)
• Diameter - Outside: 1.220" (30.99mm)
• Cable Exit: 180°
• Material composition: Aluminum Alloy, Brass, Zinc Alloy
• Plating: Chrome
• Ingress Protection: IP67
• Features: Clamp Screws, Gasket, Washer
• Series compatibility: JR-W

The substitute part JR25WCC-10(71) maintains identical electrical and mechanical specifications across all critical parameters, differing only in product status and regulatory compliance classification.

Parameter Comparison

Engineering Selection Recommendations

The JR25WCC-10(71) is the direct functional equivalent of the JR25WCC-10. Both components share identical mechanical and electrical specifications, including thread size, cable opening dimensions, material composition, and environmental sealing performance.

The primary distinction between these parts is regulatory and supply status. The JR25WCC-10(71) is classified as active product with ROHS3 compliance and REACH affected status, whereas the original JR25WCC-10 is obsolete and RoHS non-compliant. For new designs or ongoing production requiring compliance with current environmental regulations, the JR25WCC-10(71) is the appropriate selection. For legacy applications where regulatory compliance is not a requirement, either part satisfies the functional specifications.

Inventory availability also favors the substitute: JR25WCC-10(71) maintains 1303 pieces in stock compared to 969 pieces for the obsolete variant.

Frequently Asked Questions (FAQ)

Q: Are JR25WCC-10 and JR25WCC-10(71) mechanically interchangeable?

A: Yes. Both parts are identical in shell size (25), thread size (M28x0.75), cable opening (10.00mm), outside diameter (30.99mm), cable exit angle (180°), material composition, and plating. They mount identically within JR-W series connector assemblies.

Q: What is the difference between these two part numbers?

A: The JR25WCC-10(71) is the active production variant with updated regulatory compliance (ROHS3 Compliant, REACH Affected). The JR25WCC-10 is the obsolete predecessor with non-compliant status. Functionally and mechanically, they are equivalent.

Q: Which part should I specify for new designs?

A: Specify JR25WCC-10(71). This part is active, maintains higher inventory levels, and meets current environmental compliance requirements.

Q: Does packaging differ between these parts?

A: Yes. JR25WCC-10(71) is supplied in bag packaging, while JR25WCC-10 packaging is not specified. Both include identical component sets: 1 cable clamp, 1 gasket, 2 screws, and 1 washer per unit.

Q: Are there any electrical performance differences?

A: No. Both parts deliver identical IP67 ingress protection and environmental sealing performance. Electrical and mechanical characteristics are equivalent.