JR16WP-7P(71) Equivalent & Substitute Parts

Part Overview

The JR16WP-7P(71) is a 7-position circular connector plug with male pins and solder cup termination, manufactured by Hirose Electric Co Ltd. This connector is designed for applications requiring IP67/IP68 ingress protection in automotive, industrial, and telecommunications environments. The part is currently listed as obsolete, making identification of suitable substitutes essential for ongoing system support and component procurement.

Substiute Parts

JR16WP-7P(71)

Hirose Electric Co LtdIn Stock: 1097JR16WP-7P(71) Datasheet

Current PartRFQ

JR16WP-7P(31)

Hirose Electric Co LtdIn Stock: 1178JR16WP-7P(31) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The JR16WP-7P(31) qualifies as a direct substitute for the JR16WP-7P(71) based on the following critical parameters:

• Identical connector type (Plug, Male Pins)
• Identical number of positions (7)
• Identical shell size - insert (16)
• Identical termination method (Solder Cup)
• Identical fastening type (Threaded)
• Identical orientation (Keyed)
• Identical shell material and finish (Aluminum Alloy, Black Chromium)
• Identical contact finish (Silver)
• Identical ingress protection rating (IP67/IP68)
• Identical current and voltage ratings (10A, 100VAC/140VDC)
• Identical operating temperature range (-25°C ~ 85°C)
• Identical material flammability rating (UL94 V-0)
• Same manufacturer (Hirose Electric Co Ltd)
• Same base product number (JR16WP)

The primary distinction is product status: JR16WP-7P(71) is obsolete, while JR16WP-7P(31) is active with current availability.

Parameter Comparison

Engineering Selection Recommendations

The JR16WP-7P(31) is the appropriate substitute for the obsolete JR16WP-7P(71). Both parts share identical electrical, mechanical, and environmental specifications. The JR16WP-7P(31) is currently in active production status with confirmed inventory availability (1074 pcs), whereas the JR16WP-7P(71) is obsolete with limited remaining stock (1038 pcs).

For new designs and ongoing procurement, the JR16WP-7P(31) should be specified. The JR16WP-7P(31) carries RoHS3 compliance and REACH affected status, providing regulatory alignment for current manufacturing standards. Both parts maintain identical export classification (EAR99) and tariff codes (8536.69.4020).

Frequently Asked Questions (FAQ)

Q: Are JR16WP-7P(71) and JR16WP-7P(31) mechanically interchangeable?

A: Yes. Both connectors share identical shell size (16), pin configuration (7 positions), fastening type (threaded), and orientation (keyed). Physical installation and mating are identical.

Q: Are the electrical specifications identical?

A: Yes. Both parts have identical current rating (10A), voltage rating (100VAC, 140VDC), and operating temperature range (-25°C ~ 85°C).

Q: What is the difference between these two part numbers?

A: The primary difference is product status. JR16WP-7P(71) is obsolete, while JR16WP-7P(31) is active. The JR16WP-7P(31) includes RoHS3 compliance and REACH affected status documentation.

Q: Can I use JR16WP-7P(31) in existing applications designed for JR16WP-7P(71)?

A: Yes. The identical specifications across all functional parameters ensure direct substitution without design modification.

Q: What packaging is available for JR16WP-7P(31)?

A: JR16WP-7P(31) is supplied in bulk packaging.

Q: Are there any compliance differences?

A: Both parts carry identical export classification (EAR99) and tariff codes (8536.69.4020). JR16WP-7P(31) includes RoHS3 compliance and REACH affected status, reflecting current regulatory requirements.