JR16WCC-6 Circular Connector Cable Clamp Equivalent & Substitute Parts

Part Overview

The JR16WCC-6 is a black connector cable clamp for M20x0.75 threaded applications within the JR-W series circular connector family. This component provides cable strain relief and environmental sealing with IP67 ingress protection rating. The main part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this cable clamp specification.

Substiute Parts

JR16WCC-6

Hirose Electric Co LtdIn Stock: 1022JR16WCC-6 Datasheet

Current PartRFQ

JR16WCC-6(71)

Hirose Electric Co LtdIn Stock: 1235JR16WCC-6(71) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the JR16WCC-6 is determined by strict equivalence across the following critical parameters:

• Shell Size - Insert: 16
• Thread Size: M20x0.75
• Cable Opening: 0.236" (6.00mm)
• Diameter - Outside: 0.906" (23.00mm)
• Cable Exit: 180°
• Color: Black
• Material composition: Aluminum Alloy, Brass, Zinc Alloy
• Plating: Chrome
• Ingress Protection: IP67
• Included components: Cable Clamp, Gasket, Screws, Washer

The substitute part JR16WCC-6(71) maintains identical mechanical and electrical specifications while offering improved regulatory compliance and active product status.

Parameter Comparison

Engineering Selection Recommendations

The JR16WCC-6(71) serves as the direct functional equivalent to the obsolete JR16WCC-6. Both parts maintain identical mechanical dimensions, threading specifications, and environmental protection ratings. The primary distinction lies in regulatory compliance and product lifecycle status.

The JR16WCC-6(71) is classified as active product status with ROHS3 compliance, whereas the original JR16WCC-6 is obsolete and RoHS non-compliant. For new designs or ongoing production requiring this cable clamp specification, JR16WCC-6(71) is the appropriate selection. The substitute part is currently in stock with higher inventory availability (1198 pcs vs 924 pcs).

Frequently Asked Questions (FAQ)

Q: Are JR16WCC-6 and JR16WCC-6(71) mechanically interchangeable?

A: Yes. Both parts share identical shell size (16), thread size (M20x0.75), cable opening (6.00mm), outside diameter (23.00mm), and cable exit angle (180°). They are direct mechanical substitutes for JR-W series connector applications.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and regulatory compliance. JR16WCC-6(71) is an active product with ROHS3 compliance and REACH affected status, while JR16WCC-6 is obsolete and RoHS non-compliant. Functionally and mechanically, they are equivalent.

Q: Can I use JR16WCC-6(71) in applications originally designed for JR16WCC-6?

A: Yes. The substitute part maintains all critical specifications: M20x0.75 threading, 6.00mm cable opening, IP67 ingress protection, and identical material composition. It is suitable for direct replacement in existing applications.

Q: What packaging is available for the substitute part?

A: JR16WCC-6(71) is supplied in bag packaging. The original JR16WCC-6 packaging specification was not defined.

Q: Are there any compliance considerations when switching to JR16WCC-6(71)?

A: Yes. JR16WCC-6(71) is ROHS3 compliant and REACH affected, whereas the original part is RoHS non-compliant and REACH unaffected. For applications subject to RoHS or REACH regulations, JR16WCC-6(71) is the required selection.