JR16WCC-4 Equivalent & Substitute Parts

Part Overview

The JR16WCC-4 is a circular connector cable clamp manufactured by Hirose Electric Co Ltd, classified as a Size 16 connector component within the JR-W series. This black M20x0.75 cable clamp is designed for applications requiring IP67-rated ingress protection with 180° cable exit configuration. The main part is currently listed as obsolete, making identification of active equivalent parts essential for procurement and system continuity.

Substiute Parts

JR16WCC-4

Hirose Electric Co LtdIn Stock: 1057JR16WCC-4 Datasheet

Current PartRFQ

JR16WCC-4(71)

Hirose Electric Co LtdIn Stock: 807JR16WCC-4(71) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the JR16WCC-4 is determined by strict equivalence across the following critical parameters:

• Shell Size - Insert: 16
• Thread Size: M20x0.75
• Cable Opening: 0.157" (4.00mm)
• Diameter - Outside: 0.906" (23.00mm)
• Cable Exit: 180°
• Ingress Protection: IP67
• Material composition: Aluminum Alloy, Brass, Zinc Alloy
• Plating: Chrome
• Color: Black
• Included components: Cable Clamp, Gasket, Screws, Washer

The substitute part JR16WCC-4(71) maintains identical electrical and mechanical specifications across all parameters listed above, confirming direct substitutability within the JR-W series connector system.

Parameter Comparison

Engineering Selection Recommendations

The JR16WCC-4(71) is the direct equivalent for the obsolete JR16WCC-4. Both parts share identical mechanical and electrical specifications, ensuring functional compatibility within JR-W series connector assemblies. The primary distinction is product status: JR16WCC-4(71) is currently active and available, while JR16WCC-4 is obsolete.

An additional consideration is regulatory compliance. JR16WCC-4(71) carries RoHS Compliant certification, whereas the original JR16WCC-4 is RoHS non-compliant. For applications subject to RoHS requirements, JR16WCC-4(71) is the appropriate selection. Both parts maintain identical REACH and ECCN classifications (REACH Unaffected, EAR99).

Frequently Asked Questions (FAQ)

Q: Can JR16WCC-4(71) be used as a direct replacement for JR16WCC-4?

A: Yes. Both parts are manufactured by Hirose Electric Co Ltd and share identical specifications for shell size, thread size, cable opening, outside diameter, cable exit angle, ingress protection rating, material composition, plating, color, and included components. They are mechanically and electrically interchangeable within JR-W series connector systems.

Q: What is the difference between JR16WCC-4 and JR16WCC-4(71)?

A: The parts are functionally identical. The primary differences are product status (JR16WCC-4 is obsolete; JR16WCC-4(71) is active) and RoHS compliance (JR16WCC-4(71) is RoHS Compliant; JR16WCC-4 is non-compliant). Packaging differs as well: JR16WCC-4(71) is supplied in bags.

Q: Why should I select JR16WCC-4(71) over JR16WCC-4?

A: JR16WCC-4(71) is the active production part with current availability and RoHS compliance certification. JR16WCC-4 is obsolete and may face procurement constraints. For new designs and applications requiring regulatory compliance, JR16WCC-4(71) is the recommended selection.

Q: Are there any compatibility concerns when substituting these parts?

A: No compatibility concerns exist. Both parts conform to identical mechanical and electrical parameters, including M20x0.75 thread size, 4.00mm cable opening, IP67 ingress protection, and 180° cable exit configuration. They are designed for use with JR-W series plugs and maintain equivalent performance characteristics.

Q: What is included with each part?

A: Each part includes 5 pieces: 1 cable clamp, 1 gasket, 2 screws, and 1 washer. This component set is identical between JR16WCC-4 and JR16WCC-4(71).