JR13WCC-8(71) Equivalent & Substitute Parts

Part Overview

The JR13WCC-8(71) is a circular connector cable clamp manufactured by Hirose Electric Co Ltd, designed for M16x0.75 threaded applications with an 8.00mm cable opening. This component is classified as obsolete, which necessitates identification of active equivalent parts to maintain supply chain continuity and ensure system compatibility in applications requiring M16 cable clamp assemblies with IP67 ingress protection.

Substiute Parts

JR13WCC-8(71)

Hirose Electric Co LtdIn Stock: 854JR13WCC-8(71) Datasheet

Current PartRFQ

JR13WCC-8(31)

Hirose Electric Co LtdIn Stock: 1208JR13WCC-8(31) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the JR13WCC-8(71) is determined by strict equivalence across the following critical parameters:

• Shell Size - Insert: 13
• Thread Size: M16x0.75
• Cable Opening: 0.315" (8.00mm)
• Diameter - Outside: 0.787" (20.00mm)
• Cable Exit: 180°
• Ingress Protection: IP67
• Color: Black
• Plating: Chrome
• Features: Clamp Screws, Gasket, Washer
• Series: JR-W
• Base Product Number: JR13WCC

The JR13WCC-8(31) meets all mechanical and electrical compatibility requirements as a direct substitute. Both parts share identical dimensional specifications, thread characteristics, and functional features. The primary distinction lies in material composition and product status, with the substitute part being active in production.

Parameter Comparison

Engineering Selection Recommendations

The JR13WCC-8(31) is the direct equivalent for the obsolete JR13WCC-8(71). Selection of the active substitute part is based on:

• Identical mechanical dimensions and thread specifications ensuring direct fit compatibility
• Equivalent electrical and environmental performance with IP67 ingress protection rating
• Active product status providing assured supply chain availability
• RoHS3 compliance and REACH affected status of the substitute part, meeting current regulatory requirements
• Material composition difference (Brass vs. Aluminum Alloy/Brass/Zinc Alloy combination) does not affect functional compatibility within the specified application parameters

Frequently Asked Questions (FAQ)

Q: Can JR13WCC-8(31) be used as a direct replacement for JR13WCC-8(71)?

A: Yes. Both parts share identical shell size, thread size, cable opening, outside diameter, cable exit angle, and ingress protection rating. Mechanical and electrical compatibility is assured.

Q: What is the difference between the two parts?

A: The primary differences are material composition and product status. JR13WCC-8(71) uses an Aluminum Alloy, Brass, and Zinc Alloy combination, while JR13WCC-8(31) uses Brass. JR13WCC-8(31) is active in production, whereas JR13WCC-8(71) is obsolete.

Q: Are there packaging differences?

A: Yes. JR13WCC-8(71) packaging is unspecified, while JR13WCC-8(31) is supplied in bulk packaging.

Q: Does the material difference affect performance?

A: No. Both materials meet the specified ingress protection, plating, and functional requirements for M16x0.75 cable clamp applications.

Q: What compliance certifications apply to the substitute part?

A: JR13WCC-8(31) is RoHS3 compliant and REACH affected. Both parts carry EAR99 ECCN classification and identical HTSUS codes.