JMACT-5XPS General Purpose Relay Equivalent & Substitute Parts

Part Overview

The JMACT-5XPS is a general purpose relay manufactured by TE Connectivity Aerospace, Defense and Marine. This DPDT (2 Form C) relay operates at 5VDC with a 1A contact rating and is designed for through-hole mounting applications. The part is currently active in production with 772 pieces in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or component availability across manufacturing batches.

Substiute Parts

JMACT-5XPS

TE Connectivity Aerospace, Defense and MarineIn Stock: 862JMACT-5XPS Datasheet

Current PartRFQ

JMACT-5XP

TE Connectivity Aerospace, Defense and MarineIn Stock: 884JMACT-5XP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the JMACT-5XPS are identified based on electrical and mechanical parameter equivalence within the MAC series relay family. The substitution logic is based on the following critical parameters:

Electrical Parameters:

• Coil voltage: 5VDC
• Contact form: DPDT (2 Form C)
• Contact rating: 1 A
• Switching voltage: 115VAC, 28VDC - Max
• Coil current: 100 mA
• Coil resistance: 50 Ohms
• Must operate voltage: 2.7 VDC
• Must release voltage: 0.22 VDC
• Operate time: 2 ms
• Release time: 7.5 ms

Mechanical Parameters:

• Mounting type: Through Hole
• Termination style: PC Pin
• Seal rating: Sealed - Hermetically
• Operating temperature range: -65°C ~ 125°C
• Contact material: Silver Palladium (AgPd), Gold (Au)

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes within the same application context.

Parameter Comparison

Engineering Selection Recommendations

The JMACT-5XP is a parametric equivalent to the JMACT-5XPS with identical electrical and mechanical specifications. Both parts are manufactured by TE Connectivity Aerospace, Defense and Marine within the MAC series and share the same coil voltage, contact configuration, current ratings, timing characteristics, and operating temperature range.

Compliance Consideration: The JMACT-5XPS is ROHS3 compliant, while the JMACT-5XP is RoHS non-compliant. Selection between these parts must account for regulatory requirements applicable to the end application. Applications subject to RoHS directives require the JMACT-5XPS. Applications without RoHS requirements may utilize either part based on availability and inventory status.

Both parts maintain identical REACH unaffected status, ECCN classification (EAR99), and HTSUS code (8536.41.0050). Both are rated MSL 1 (Unlimited moisture sensitivity level).

Frequently Asked Questions (FAQ)

Q: What makes JMACT-5XP a substitute for JMACT-5XPS?

A: The JMACT-5XP meets all electrical and mechanical parameter requirements of the JMACT-5XPS. Both parts operate at 5VDC, feature DPDT (2 Form C) contact configuration, support 1A contact rating, share identical coil current (100 mA), coil resistance (50 Ohms), timing characteristics (2 ms operate, 7.5 ms release), and operating temperature range (-65°C ~ 125°C). Both use through-hole PC pin termination with hermetically sealed construction and identical contact materials.

Q: Are there differences between JMACT-5XPS and JMACT-5XP?

A: The primary difference is RoHS compliance status. The JMACT-5XPS is ROHS3 compliant, while the JMACT-5XP is RoHS non-compliant. All other electrical, mechanical, and regulatory parameters are identical.

Q: Which part should I select for RoHS-regulated applications?

A: The JMACT-5XPS must be used for applications subject to RoHS directives due to its ROHS3 compliance status.

Q: Can JMACT-5XP be used in place of JMACT-5XPS in non-RoHS applications?

A: Yes. In applications without RoHS regulatory requirements, the JMACT-5XP provides electrical and mechanical equivalence to the JMACT-5XPS.

Q: Are both parts available in the same packaging?

A: Both parts are supplied in bulk packaging. Current inventory shows 772 pieces of JMACT-5XPS and 801 pieces of JMACT-5XP in stock.

Q: Do these relays require any special handling or storage considerations?

A: Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: What is the base product number for these relays?

A: The base product number for both JMACT-5XPS and JMACT-5XP is JMACT, indicating they belong to the same relay family within the MAC series.