JMACT-5XMS General Purpose Relay DPDT Equivalent & Substitute Parts

Part Overview

The JMACT-5XMS is a general purpose relay manufactured by TE Connectivity Aerospace, Defense and Marine. This DPDT (Double Pole Double Throw) relay operates at 5VDC with a 1A contact rating and is designed for through-hole mounting applications. The part is currently active in production with 701 pieces in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity.

Key Parameters

Parameter	Value
Coil Voltage	5VDC
Contact Form	DPDT (2 Form C)
Contact Rating (Current)	1 A
Switching Voltage	115VAC, 28VDC - Max
Coil Current	100 mA
Mounting Type	Through Hole
Operating Temperature Range	-65°C ~ 125°C
Coil Resistance	50 Ohms
Seal Rating	Sealed - Hermetically
Contact Material	Silver Palladium (AgPd), Gold (Au)

Substitute Part Grouping Explanation

Substitution of the JMACT-5XMS is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part JMACT-5XP is classified as a parametric equivalent based on the following criteria:

Critical Parameters for Substitution:

Coil voltage: 5VDC
Contact configuration: DPDT (2 Form C)
Contact current rating: 1 A
Switching voltage capability: 115VAC, 28VDC - Max
Coil current draw: 100 mA
Mounting technology: Through Hole with PC Pin termination
Operating temperature range: -65°C ~ 125°C
Coil resistance: 50 Ohms
Hermetic seal rating
Contact material composition: Silver Palladium (AgPd), Gold (Au)

Both parts belong to the TE Connectivity MAC series and share identical functional specifications, enabling direct substitution in circuit designs without modification to PCB layouts or electrical schematics.

Parameter Comparison

Parameter	JMACT-5XMS	JMACT-5XP	Match
Manufacturer	TE Connectivity Aerospace, Defense and Marine	TE Connectivity Aerospace, Defense and Marine	Yes
Series	MAC	MAC	Yes
Coil Voltage	5VDC	5VDC	Yes
Contact Form	DPDT (2 Form C)	DPDT (2 Form C)	Yes
Contact Rating (Current)	1 A	1 A	Yes
Switching Voltage	115VAC, 28VDC - Max	115VAC, 28VDC - Max	Yes
Coil Current	100 mA	100 mA	Yes
Coil Type	Non Latching	Non Latching	Yes
Features	Diode	Diode	Yes
Mounting Type	Through Hole	Through Hole	Yes
Termination Style	PC Pin	PC Pin	Yes
Seal Rating	Sealed - Hermetically	Sealed - Hermetically	Yes
Must Operate Voltage	2.7 VDC	2.7 VDC	Yes
Must Release Voltage	0.22 VDC	0.22 VDC	Yes
Operate Time	2 ms	2 ms	Yes
Release Time	7.5 ms	7.5 ms	Yes
Operating Temperature	-65°C ~ 125°C	-65°C ~ 125°C	Yes
Contact Material	Silver Palladium (AgPd), Gold (Au)	Silver Palladium (AgPd), Gold (Au)	Yes
Coil Resistance	50 Ohms	50 Ohms	Yes
Product Status	Active	Active	Yes
RoHS Status	RoHS non-compliant	RoHS non-compliant	Yes
REACH Status	REACH Unaffected	REACH Unaffected	Yes
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	Yes

Engineering Selection Recommendations

Both JMACT-5XMS and JMACT-5XP are active production parts from TE Connectivity Aerospace, Defense and Marine with identical electrical and mechanical specifications. Selection between these parts is based on availability and supply chain requirements rather than functional differences.

Compliance Considerations: Both parts carry identical regulatory status: RoHS non-compliant, REACH Unaffected, and MSL 1 (Unlimited). Design teams must account for these compliance designations in applications subject to RoHS or REACH requirements.

Inventory Status: JMACT-5XMS: 701 pieces in stock JMACT-5XP: 801 pieces in stock

The JMACT-5XP offers higher current inventory availability. Both parts are suitable for immediate deployment in production environments.

Frequently Asked Questions (FAQ)

Q: Can JMACT-5XP be used as a direct replacement for JMACT-5XMS?

A: Yes. Both parts are parametric equivalents with identical electrical and mechanical specifications. No circuit modifications, PCB layout changes, or firmware updates are required for substitution.

Q: Are there any differences in contact material or switching characteristics?

A: No. Both parts use identical Silver Palladium (AgPd) and Gold (Au) contact materials, operate at 2 ms, and release at 7.5 ms. Switching voltage capability (115VAC, 28VDC - Max) and current rating (1 A) are identical.

Q: What is the operating temperature range for both relays?

A: Both JMACT-5XMS and JMACT-5XP operate across -65°C to 125°C. This range applies to all electrical and mechanical functions.

Q: Are these relays suitable for aerospace and defense applications?

A: Both parts are manufactured by TE Connectivity Aerospace, Defense and Marine. Compliance with specific aerospace or defense standards must be verified against applicable procurement specifications and qualification requirements.

Q: What is the coil resistance and current draw?

A: Both relays have a coil resistance of 50 Ohms and draw 100 mA at 5VDC. The must-operate voltage is 2.7 VDC, and the must-release voltage is 0.22 VDC.

Q: Are these parts RoHS compliant?

A: No. Both JMACT-5XMS and JMACT-5XP are RoHS non-compliant. Applications requiring RoHS compliance must identify alternative parts from the manufacturer's product portfolio.

Q: What is the moisture sensitivity level (MSL)?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or reflow processes.

Q: How do the through-hole PC pin terminations affect PCB design?

A: Both parts use identical PC pin termination for through-hole mounting. PCB footprints, hole spacing, and solder pad dimensions are equivalent between JMACT-5XMS and JMACT-5XP.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message