JMACDG-5XM Equivalent & Substitute Parts

Part Overview

The JMACDG-5XM is a general purpose relay manufactured by TE Connectivity Aerospace, Defense and Marine. This DPDT (Double Pole Double Throw) relay operates at 5VDC with a 1A contact rating and is designed for through-hole mounting applications. The component features hermetically sealed construction with integrated diode protection and is classified as Active product status.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same relay series, enabling direct functional replacement in circuit designs without modification to PCB layouts or electrical specifications.

Substiute Parts

JMACDG-5XM

TE Connectivity Aerospace, Defense and MarineIn Stock: 1123JMACDG-5XM Datasheet

Current PartRFQ

1617351-9

TE Connectivity Aerospace, Defense and MarineIn Stock: 11011617351-9 Datasheet

Parametric EquivalentRFQ

JMACD-5XMS2

TE Connectivity Aerospace, Defense and MarineIn Stock: 1003JMACD-5XMS2 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the JMACDG-5XM are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following criteria:

Electrical Parameters (Must Match Exactly):

• Coil voltage: 5VDC
• Contact form: DPDT (2 Form C)
• Contact rating: 1 A
• Switching voltage: 115VAC, 28VDC - Max
• Coil current: 100 mA
• Coil type: Non Latching
• Coil resistance: 50 Ohms
• Must operate voltage: 2.7 VDC
• Must release voltage: 0.22 VDC
• Operate time: 2 ms
• Release time: 4 ms

Mechanical Parameters (Must Match Exactly):

• Mounting type: Through Hole
• Termination style: PC Pin
• Seal rating: Sealed - Hermetically
• Operating temperature range: -65°C ~ 125°C

Series Designation:

• All substitute parts belong to the MAC series from TE Connectivity Aerospace, Defense and Marine

Parts meeting all specified parameters are classified as parametric equivalents and are suitable for direct substitution in applications requiring the JMACDG-5XM.

Parameter Comparison

Engineering Selection Recommendations

All three parts—JMACDG-5XM, 1617351-9, and JMACD-5XMS2—are parametric equivalents within the TE Connectivity MAC relay series. Each part maintains identical electrical specifications, mechanical configurations, and compliance certifications.

Product Status: All parts are classified as Active, indicating current manufacturing and availability.

Compliance Considerations: All parts share identical RoHS non-compliance status, REACH Unaffected designation, and EAR99 ECCN classification. Selection among these parts does not introduce compliance variations.

Inventory Availability: Current stock levels are as follows:

• JMACDG-5XM: 1025 Pcs
• 1617351-9: 1073 Pcs
• JMACD-5XMS2: 979 Pcs

Selection between these parts is based on application requirements, supply chain considerations, and inventory availability rather than electrical or mechanical differentiation.

Frequently Asked Questions (FAQ)

Q: Can 1617351-9 be used as a direct replacement for JMACDG-5XM?

A: Yes. Both parts are parametric equivalents with identical coil voltage (5VDC), contact form (DPDT), current rating (1A), switching voltage (115VAC, 28VDC - Max), operating temperature range (-65°C ~ 125°C), and all timing specifications. Through-hole mounting and PC pin termination are identical. Direct substitution is supported without circuit modification.

Q: What is the difference between JMACD-5XMS2 and JMACDG-5XM?

A: No electrical or mechanical differences exist between these parts. Both are sealed hermetically, operate at 5VDC with 1A contact rating, and share identical coil resistance (50 Ohms), timing parameters, and temperature specifications. The part number variation reflects internal TE Connectivity designation but does not indicate functional differentiation.

Q: Are all substitute parts RoHS compliant?

A: No. JMACDG-5XM, 1617351-9, and JMACD-5XMS2 are all RoHS non-compliant. If RoHS compliance is required for your application, these parts are not suitable.

Q: Do these relays require special handling for moisture sensitivity?

A: No. All three parts are classified as Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Can these relays be used in aerospace and defense applications?

A: These relays are manufactured by TE Connectivity Aerospace, Defense and Marine and are designated as EAR99 under export control regulations. Application suitability depends on specific system requirements and regulatory compliance obligations beyond component classification.

Q: What is the coil resistance specification, and why is it important?

A: All three parts have a coil resistance of 50 Ohms. This specification determines the coil current draw (100 mA at 5VDC) and is critical for power supply design and circuit protection calculations.

Q: Are the contact materials identical across all substitute parts?

A: Yes. All parts use Silver Palladium (AgPd) and Gold (Au) contact materials, ensuring consistent electrical performance and contact reliability across substitutions.