JMACD-5XLS2 Equivalent & Substitute Parts

Part Overview

The JMACD-5XLS2 is a general purpose relay manufactured by TE Connectivity Aerospace, Defense and Marine. This DPDT (Double Pole Double Throw) relay operates at 5VDC with a 1A contact rating and is designed for through-hole mounting applications. The part is currently active in production status with 834 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters allow direct replacement in circuit applications without modification to PCB layout or electrical connections. Substitutes for the JMACD-5XLS2 exist within the same MAC series, providing identical functional performance and form factor compatibility.

Substiute Parts

JMACD-5XLS2

TE Connectivity Aerospace, Defense and MarineIn Stock: 917JMACD-5XLS2 Datasheet

Current PartRFQ

JMACD-5XMS2

TE Connectivity Aerospace, Defense and MarineIn Stock: 1003JMACD-5XMS2 Datasheet

Parametric EquivalentRFQ

1617351-9

TE Connectivity Aerospace, Defense and MarineIn Stock: 11011617351-9 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the JMACD-5XLS2 are classified as parametric equivalents based on identical electrical and mechanical specifications. The substitution logic is determined by the following critical parameters:

Electrical Parameters:

• Coil voltage: 5VDC
• Contact form: DPDT (2 Form C)
• Contact rating: 1 A
• Switching voltage: 115VAC, 28VDC maximum
• Coil current: 100 mA
• Coil resistance: 50 Ohms
• Must operate voltage: 2.7 VDC
• Must release voltage: 0.22 VDC
• Operate time: 2 ms
• Release time: 4 ms

Mechanical Parameters:

• Mounting type: Through Hole
• Termination style: PC Pin
• Seal rating: Sealed - Hermetically
• Operating temperature: -65°C ~ 125°C

All substitute parts listed maintain identical values across these parameters, ensuring direct functional equivalence and interchangeability within the MAC series relay family.

Parameter Comparison

Engineering Selection Recommendations

All three parts—JMACD-5XLS2, JMACD-5XMS2, and 1617351-9—are active production components manufactured by TE Connectivity Aerospace, Defense and Marine within the MAC series. Each part maintains identical electrical and mechanical specifications, ensuring direct interchangeability in circuit applications.

Compliance Considerations:

All substitute parts share identical regulatory status:

• RoHS non-compliant
• REACH Unaffected
• ECCN: EAR99
• HTSUS: 8536.41.0050
• Moisture Sensitivity Level: 1 (Unlimited)

Inventory Availability:

Selection between equivalent parts may be based on stock availability:

• JMACD-5XLS2: 834 units in stock
• JMACD-5XMS2: 979 units in stock
• 1617351-9: 1,073 units in stock

All parts are supplied in bulk packaging and are suitable for immediate deployment in production environments without design modification or electrical circuit redesign.

Frequently Asked Questions (FAQ)

Q: Can JMACD-5XMS2 and 1617351-9 be used as direct replacements for JMACD-5XLS2?

A: Yes. Both parts are parametric equivalents with identical electrical and mechanical specifications. Direct substitution is possible without PCB layout modification or circuit redesign.

Q: What determines whether a relay can substitute for the JMACD-5XLS2?

A: Substitution is determined by matching all critical parameters: coil voltage (5VDC), contact form (DPDT), contact rating (1A), switching voltage (115VAC/28VDC max), coil current (100mA), mounting type (through hole), termination style (PC pin), and operating temperature range (-65°C to 125°C).

Q: Are there differences in contact material between the three parts?

A: No. All three parts use identical contact material composition: Silver Palladium (AgPd) and Gold (Au).

Q: Do all substitute parts have the same response time characteristics?

A: Yes. Operate time and release time are identical across all parts: 2 ms operate time and 4 ms release time.

Q: What is the significance of the 50 Ohm coil resistance specification?

A: The 50 Ohm coil resistance, combined with the 100 mA coil current specification, determines the voltage drop and power dissipation characteristics. All substitute parts maintain this specification for equivalent thermal and electrical performance.

Q: Are there any packaging differences between JMACD-5XLS2, JMACD-5XMS2, and 1617351-9?

A: All three parts are supplied in bulk packaging with identical through-hole PC pin termination. No packaging differentiation exists between the parts.

Q: What is the operating voltage range for these relays?

A: The must operate voltage is 2.7 VDC minimum and must release voltage is 0.22 VDC maximum. The nominal coil voltage is 5VDC.

Q: Are these relays suitable for aerospace and defense applications?

A: These relays are manufactured by TE Connectivity Aerospace, Defense and Marine and are classified under ECCN EAR99. Compliance with specific application requirements must be verified against end-use specifications.