JMAC-12XM General Purpose Relay DPDT Equivalent & Substitute Parts

Part Overview

The JMAC-12XM is a general purpose relay manufactured by TE Connectivity Aerospace, Defense and Marine. This DPDT (2 Form C) through-hole relay operates at 12VDC with a 1A contact rating and is designed for switching applications up to 115VAC or 28VDC maximum. The part is currently active in production with 1024 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or component availability across TE Connectivity's relay product lines.

Substiute Parts

JMAC-12XM

TE Connectivity Aerospace, Defense and MarineIn Stock: 1109JMAC-12XM Datasheet

Current PartRFQ

2-1617351-9

TE Connectivity Aerospace, Defense and MarineIn Stock: 9102-1617351-9 Datasheet

Parametric EquivalentRFQ

6-1617542-0

TE Connectivity Aerospace, Defense and MarineIn Stock: 9386-1617542-0 Datasheet

Parametric EquivalentRFQ

JMAC-12XP

TE Connectivity Aerospace, Defense and MarineIn Stock: 997JMAC-12XP Datasheet

Parametric EquivalentRFQ

JMAP-12XL

TE Connectivity Aerospace, Defense and MarineIn Stock: 966JMAP-12XL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the JMAC-12XM are qualified based on identical electrical and mechanical parameters across all critical specifications. The substitution logic is based on the following key parameters that must match:

• Coil voltage: 12VDC
• Contact form: DPDT (2 Form C)
• Contact rating: 1 A
• Switching voltage: 115VAC, 28VDC - Max
• Coil current: 30.8 mA
• Coil resistance: 390 Ohms
• Mounting type: Through Hole
• Termination style: PC Pin
• Seal rating: Sealed - Hermetically
• Operating temperature range: -65°C ~ 125°C
• Contact material: Silver Palladium (AgPd), Gold (Au)
• Must operate voltage: 7 VDC
• Must release voltage: 0.63 VDC
• Operate time: 2 ms
• Release time: 1.5 ms

All substitute parts listed maintain these specifications and are manufactured by TE Connectivity Aerospace, Defense and Marine. Variations in series designation (MAC, MA, MGA, CII) and base product numbers reflect internal product line organization but do not affect functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are manufactured by TE Connectivity Aerospace, Defense and Marine and maintain identical electrical and mechanical specifications to the JMAC-12XM. Selection among these equivalents is based on product status, compliance certifications, and inventory availability.

RoHS Compliance Status:

• JMAC-12XM: RoHS non-compliant
• JMAC-12XP: RoHS non-compliant
• 2-1617351-9: RoHS non-compliant
• 6-1617542-0: ROHS3 Compliant
• JMAP-12XL: RoHS non-compliant

The part 6-1617542-0 is the only substitute that meets ROHS3 compliance requirements. This part is suitable for applications requiring RoHS3 certification and maintains full electrical and mechanical equivalence.

REACH Status:

• JMAC-12XM: REACH Unaffected
• JMAC-12XP: REACH Unaffected
• 2-1617351-9: Vendor Undefined
• 6-1617542-0: REACH Unaffected
• JMAP-12XL: REACH Unaffected

All parts are classified as Active in product status. Selection should prioritize compliance requirements specific to the application and regulatory jurisdiction.

Frequently Asked Questions (FAQ)

Q: Can JMAC-12XP be used as a direct replacement for JMAC-12XM?

A: Yes. JMAC-12XP is a parametric equivalent with identical electrical and mechanical specifications. Both parts belong to the MAC series and share the same base product number JMAC-12. The difference in suffix (XM vs. XP) reflects internal product line variations that do not affect functional performance.

Q: What is the difference between 2-1617351-9 and 6-1617542-0?

A: Both parts are parametric equivalents with identical electrical and mechanical specifications. The primary difference is RoHS compliance status: 6-1617542-0 is ROHS3 Compliant, while 2-1617351-9 is RoHS non-compliant. Additionally, 2-1617351-9 has Vendor Undefined REACH status, whereas 6-1617542-0 is REACH Unaffected. Selection depends on regulatory requirements for the application.

Q: Are JMAP-12XL and JMAC-12XM interchangeable?

A: Yes. JMAP-12XL is a parametric equivalent with identical electrical and mechanical specifications. The difference in base product number (JMAP vs. JMAC) and series designation (MA, CII vs. MAC) reflects internal product line organization but does not affect functional equivalence or pin compatibility.

Q: Which substitute part has the highest inventory availability?

A: JMAC-12XP has the highest inventory with 973 units in stock, followed by JMAP-12XL with 920 units. The original JMAC-12XM has 1024 units available.

Q: Is there a substitute part that meets RoHS3 compliance?

A: Yes. Part 6-1617542-0 is ROHS3 Compliant and maintains full electrical and mechanical equivalence to JMAC-12XM. This part is suitable for applications requiring RoHS3 certification.

Q: Do all substitute parts have the same through-hole PC pin termination?

A: Yes. All substitute parts use PC Pin termination style and are designed for through-hole mounting. They are mechanically compatible with PCB layouts designed for JMAC-12XM.

Q: What is the operating temperature range for all these relays?

A: All parts, including JMAC-12XM and all substitutes, operate across the temperature range of -65°C to 125°C.

Q: Are there any differences in contact material between the main part and substitutes?

A: No. All parts use identical contact material composition: Silver Palladium (AgPd) and Gold (Au).