JMAC-12XLS General Purpose Relay DPDT Equivalent & Substitute Parts

Part Overview

The JMAC-12XLS is a general purpose relay manufactured by TE Connectivity Aerospace, Defense and Marine. This DPDT (2 Form C) through-hole relay operates at 12VDC with a 1A contact rating and is designed for switching applications up to 115VAC or 28VDC maximum. The part is currently active in production with 845 pieces in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or component availability across the TE Connectivity relay product portfolio.

Substiute Parts

JMAC-12XLS

TE Connectivity Aerospace, Defense and MarineIn Stock: 863JMAC-12XLS Datasheet

Current PartRFQ

2-1617351-9

TE Connectivity Aerospace, Defense and MarineIn Stock: 9102-1617351-9 Datasheet

Parametric EquivalentRFQ

6-1617542-0

TE Connectivity Aerospace, Defense and MarineIn Stock: 9386-1617542-0 Datasheet

Parametric EquivalentRFQ

JMAC-12XP

TE Connectivity Aerospace, Defense and MarineIn Stock: 997JMAC-12XP Datasheet

Parametric EquivalentRFQ

JMAP-12XL

TE Connectivity Aerospace, Defense and MarineIn Stock: 966JMAP-12XL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the JMAC-12XLS are qualified based on identical electrical and mechanical parameters across all critical switching and coil specifications. The substitution logic is based on the following key parameters that must match exactly:

• Coil Voltage: 12VDC
• Contact Form: DPDT (2 Form C)
• Contact Rating (Current): 1 A
• Switching Voltage: 115VAC, 28VDC - Max
• Coil Current: 30.8 mA
• Coil Type: Non Latching
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Seal Rating: Sealed - Hermetically
• Operating Temperature Range: -65°C ~ 125°C
• Contact Material: Silver Palladium (AgPd), Gold (Au)
• Coil Resistance: 390 Ohms
• Must Operate Voltage: 7 VDC
• Must Release Voltage: 0.63 VDC
• Operate Time: 2 ms
• Release Time: 1.5 ms

All four substitute parts meet these criteria and are therefore electrically and mechanically interchangeable with the JMAC-12XLS in applications requiring these specifications.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are electrically and mechanically equivalent to the JMAC-12XLS and are suitable for direct replacement in applications requiring a 12VDC DPDT general purpose relay with 1A contact rating and hermetically sealed through-hole construction.

Compliance Considerations:

The part 6-1617542-0 is ROHS3 compliant, whereas the JMAC-12XLS, JMAC-12XP, 2-1617351-9, and JMAP-12XL are RoHS non-compliant. Selection between compliant and non-compliant variants depends on end-application regulatory requirements.

Regarding REACH status, the JMAC-12XLS, JMAC-12XP, and JMAP-12XL are REACH Unaffected, while 6-1617542-0 is also REACH Unaffected. The part 2-1617351-9 has Vendor Undefined REACH status.

All parts are active products with current production status and adequate inventory availability. Selection may be based on series preference (MAC series: JMAC-12XLS, JMAC-12XP; MA/CII series: 2-1617351-9, JMAP-12XL; MGA/CII series: 6-1617542-0) or compliance requirements specific to the application.

Frequently Asked Questions (FAQ)

Q: Can JMAC-12XP be used as a direct replacement for JMAC-12XLS?

A: Yes. Both parts are from the MAC series and share identical electrical and mechanical specifications including 12VDC coil voltage, DPDT contact form, 1A contact rating, 390 Ohm coil resistance, and hermetically sealed through-hole construction. Both are RoHS non-compliant and REACH Unaffected.

Q: What is the difference between the substitute parts?

A: The substitute parts differ in series designation and compliance status. JMAC-12XP is MAC series (RoHS non-compliant). The parts 2-1617351-9 and JMAP-12XL are MA/CII series (RoHS non-compliant). The part 6-1617542-0 is MGA/CII series and is ROHS3 compliant. All other electrical and mechanical parameters are identical.

Q: Is 6-1617542-0 suitable for applications requiring RoHS compliance?

A: Yes. The part 6-1617542-0 is ROHS3 compliant and meets the same electrical and mechanical specifications as the JMAC-12XLS. It is suitable for applications with RoHS compliance requirements.

Q: Are all substitute parts through-hole mounted?

A: Yes. All substitute parts use through-hole mounting with PC pin termination style, identical to the JMAC-12XLS.

Q: What is the operating temperature range for these relays?

A: All parts, including the JMAC-12XLS and all substitute parts, operate across the temperature range of -65°C to 125°C.

Q: Do all substitute parts have hermetically sealed construction?

A: Yes. All substitute parts are hermetically sealed, matching the JMAC-12XLS specification.

Q: Can these relays switch both AC and DC loads?

A: Yes. All parts are rated for switching up to 115VAC or 28VDC maximum, providing flexibility for both AC and DC switching applications.

Q: What is the coil current requirement for these relays?

A: All parts require 30.8 mA coil current at 12VDC, with a coil resistance of 390 Ohms.

Q: What are the switching speed characteristics?

A: All parts have an operate time of 2 ms and a release time of 1.5 ms, providing consistent switching performance across the product family.