JM1AN-TMP-DC6V-F Equivalent & Substitute Parts

Part Overview

The JM1AN-TMP-DC6V-F is a general purpose relay manufactured by Panasonic Electric Works, configured as a Single Pole Single Throw Normally Open (SPST-NO) contact form with a 6VDC coil. This through-hole mounted relay is rated for 20A switching capacity at 250VAC maximum and features sealed flux protection construction. The product is currently obsolete, making identification of functionally equivalent alternatives necessary for ongoing system maintenance and new design implementations where this relay specification is required.

Substiute Parts

JM1AN-TMP-DC6V-F

Panasonic Electric WorksIn Stock: 903JM1AN-TMP-DC6V-F Datasheet

Current PartRFQ

ALF1T06

Panasonic Electric WorksIn Stock: 987ALF1T06 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the JM1AN-TMP-DC6V-F is determined by strict equivalence across the following critical parameters:

• Coil voltage specification (6VDC)
• Contact form configuration (SPST-NO)
• Current rating (20A minimum)
• Switching voltage capability (250VAC minimum)
• Coil current draw (150 mA)
• Mounting method (Through Hole)
• Termination connector type (PC Pin, Quick Connect - 0.250")
• Coil resistance (40 Ohms)
• Operating temperature range (-40°C ~ 60°C)

The ALF1T06 meets all these criteria and qualifies as a direct functional equivalent.

Parameter Comparison

Engineering Selection Recommendations

The ALF1T06 is the qualified substitute for the obsolete JM1AN-TMP-DC6V-F. Both relays are manufactured by Panasonic Electric Works and share identical electrical and mechanical specifications across all critical parameters. The ALF1T06 holds active product status, ensuring ongoing availability and supply chain continuity.

The ALF1T06 carries cURus and VDE approval certifications and maintains RoHS compliance, providing regulatory advantages over the obsolete JM1AN-TMP-DC6V-F. The contact material differs (Silver Tin Oxide versus Silver Alloy), and the release time is marginally longer (15 ms versus 10 ms), but these variations remain within acceptable operational tolerances for general purpose relay applications.

Frequently Asked Questions (FAQ)

Q: Can the ALF1T06 directly replace the JM1AN-TMP-DC6V-F in existing circuit boards?

A: Yes. Both relays share identical coil voltage (6VDC), contact form (SPST-NO), current rating (20A), switching voltage (250VAC), mounting type (Through Hole), and termination style (PC Pin, Quick Connect - 0.250"). Physical and electrical compatibility is confirmed.

Q: What is the difference in release time between these two relays?

A: The JM1AN-TMP-DC6V-F has a release time of 10 ms, while the ALF1T06 has a release time of 15 ms. This 5 ms difference is typical among relay variants and does not affect functionality in standard general purpose switching applications.

Q: Why does the ALF1T06 use Silver Tin Oxide contacts instead of Silver Alloy?

A: Silver Tin Oxide (AgSnO) contact material is a standard upgrade in modern relay designs, offering improved arc resistance and contact longevity compared to Silver Alloy. This represents a technical advancement in the ALF series.

Q: Is the ALF1T06 available in the same packaging as the JM1AN-TMP-DC6V-F?

A: The ALF1T06 is supplied in Bulk packaging, while the JM1AN-TMP-DC6V-F was supplied with standard packaging. Both are through-hole mounted relays with identical termination connectors, ensuring mechanical compatibility on PCBs.

Q: What certifications does the ALF1T06 carry?

A: The ALF1T06 holds cURus and VDE approval certifications and is RoHS compliant. The obsolete JM1AN-TMP-DC6V-F does not list these certifications, making the ALF1T06 the preferred choice for applications requiring regulatory compliance documentation.

Q: Are both relays rated for the same operating temperature range?

A: Yes. Both the JM1AN-TMP-DC6V-F and ALF1T06 operate across the identical temperature range of -40°C to 60°C.