JC6-P208-09 Equivalent & Substitute Parts

Part Overview

The JC6-P208-09 is a 9-circuit barrier block connector manufactured by TE Connectivity AMP Connectors. This terminal block features 0.375" (9.53mm) pitch spacing, 20A current rating, and 300V voltage rating, with screws and captive plate top termination and PC pin bottom termination. The connector is actively produced and widely used in chassis and panel-mounted applications requiring reliable wire termination.

Substitute parts are identified when equivalent electrical and mechanical parameters are available from alternative manufacturers, enabling procurement flexibility, inventory optimization, and supply chain continuity.

Substiute Parts

JC6-P208-09

TE Connectivity AMP ConnectorsIn Stock: 1104JC6-P208-09 Datasheet

Current PartRFQ

CBP-9

Curtis IndustriesIn Stock: 1147CBP-9 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the JC6-P208-09 is determined by strict equivalence across the following critical parameters:

• Circuit Configuration: 9 circuits with 0.375" (9.53mm) pitch spacing
• Electrical Performance: 20A current rating and 300V voltage rating
• Termination Compatibility: PC pin bottom termination and screw-based top termination
• Mechanical Compatibility: Dual-wall barrier type, flange feature, through-hole mounting for chassis and panel applications
• Wire Acceptance: 12-22 AWG wire gauge range
• Safety Compliance: UL94 V-0 flammability rating
• Regulatory Status: RoHS compliance and EAR99 ECCN classification

The CBP-9 from Curtis Industries meets all these criteria and is classified as an equivalent substitute part.

Parameter Comparison

Engineering Selection Recommendations

Both the JC6-P208-09 and CBP-9 are actively produced components with equivalent electrical and mechanical specifications. Selection between these parts is based on the following factors:

JC6-P208-09 (TE Connectivity AMP Connectors)

• Established supply chain through TE Connectivity distribution network
• RoHS Compliant certification
• Operating temperature rating: 105°C
• Top termination includes captive plate feature
• Thermoplastic insulation material

CBP-9 (Curtis Industries)

• Alternative supply source for procurement flexibility
• ROHS3 Compliant certification (higher RoHS revision level)
• Operating temperature rating: 140°C (higher thermal capability)
• Polyester thermoplastic insulation material
• Bulk packaging option

Both parts satisfy UL94 V-0 flammability requirements, EAR99 export classification, and MSL 1 moisture sensitivity specifications. The CBP-9 offers extended operating temperature range and higher RoHS compliance revision, while the JC6-P208-09 provides captive plate termination design. Component selection should align with application thermal requirements and supply chain strategy.

Frequently Asked Questions (FAQ)

Q: Can the CBP-9 directly replace the JC6-P208-09 in existing designs?

A: The CBP-9 is electrically and mechanically equivalent to the JC6-P208-09 across all critical parameters: 9 circuits, 0.375" pitch, 20A current rating, 300V voltage rating, dual-wall barrier type, PC pin bottom termination, and UL94 V-0 flammability rating. Both parts accept 12-22 AWG wire and support chassis and panel through-hole mounting. The primary design difference is the top termination: the JC6-P208-09 includes a captive plate with screws, while the CBP-9 uses screws without captive plate. This difference does not affect electrical performance or mechanical compatibility in standard applications.

Q: What is the difference in operating temperature between these parts?

A: The JC6-P208-09 operates to 105°C, while the CBP-9 operates to 140°C. Applications requiring sustained operation above 105°C should specify the CBP-9. Both parts use thermoplastic-based insulation materials suitable for their respective temperature ranges.

Q: Are there RoHS compliance differences between these parts?

A: The JC6-P208-09 carries RoHS Compliant certification, while the CBP-9 carries ROHS3 Compliant certification. ROHS3 represents a higher revision level of RoHS compliance standards. Both parts meet current RoHS requirements; the CBP-9 demonstrates compliance with the more recent standard revision.

Q: What packaging options are available?

A: The JC6-P208-09 is available in standard packaging (packaging type not specified in data). The CBP-9 is available in bulk packaging. Packaging selection should align with procurement volume and inventory management requirements.

Q: Are both parts actively manufactured?

A: Yes. Both the JC6-P208-09 and CBP-9 are listed with Active product status, indicating current production and availability through authorized distributors.

Q: What is the significance of the captive plate feature on the JC6-P208-09?

A: The captive plate on the JC6-P208-09 top termination provides a mechanical feature that retains the screw during assembly and operation. The CBP-9 uses standard screws without this retention feature. In applications where screw retention is critical, the JC6-P208-09 design offers this advantage. Both designs are functionally equivalent for electrical termination.