JC6-P207-10 Equivalent & Substitute Parts

Part Overview

The JC6-P207-10 is a 10-circuit barrier block connector manufactured by TE Connectivity AMP Connectors. This terminal block features a 0.375" (9.53mm) pitch with screw-based top termination and PC pin bottom termination, designed for chassis and panel mounting applications. The connector is rated for 20A at 300V and accommodates wire gauges from 12-22 AWG. The product maintains Active status with full RoHS compliance and UL94 V-0 flammability rating.

Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable, to support inventory optimization, or to accommodate specific application requirements within the allowed electrical and mechanical parameters.

Substiute Parts

JC6-P207-10

TE Connectivity AMP ConnectorsIn Stock: 1081JC6-P207-10 Datasheet

Current PartRFQ

CBP-10

Curtis IndustriesIn Stock: 817CBP-10 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the JC6-P207-10 with the CBP-10 is based on equivalence across all critical electrical and mechanical parameters. Both parts share identical specifications for the following substitution-determining criteria:

• Number of circuits: 10
• Pitch spacing: 0.375" (9.53mm)
• Current rating: 20A
• Voltage rating: 300V
• Wire gauge accommodation: 12-22 AWG
• Termination method: Screw top, PC pin bottom
• Barrier configuration: 2 Wall (Dual)
• Mounting configuration: Chassis, Panel; Through Hole
• Flammability classification: UL94 V-0
• Moisture sensitivity level: 1 (Unlimited)

Both parts are classified as Active products with full regulatory compliance. The CBP-10 represents a direct functional equivalent suitable for applications requiring the JC6-P207-10 specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the JC6-P207-10 and CBP-10 are Active products with full regulatory compliance suitable for direct substitution in applications requiring 10-circuit barrier block connectors with 0.375" pitch and 20A/300V ratings.

The JC6-P207-10 (TE Connectivity) maintains an operating temperature rating of 105°C with standard thermoplastic insulation and RoHS compliance.

The CBP-10 (Curtis Industries) provides an extended operating temperature rating of 140°C with polyester thermoplastic insulation and ROHS3 compliance. The CBP-10 is suitable for applications requiring higher thermal performance within the same electrical and mechanical envelope.

Selection between these parts should be based on application-specific thermal requirements and preferred supplier relationships. Both parts satisfy identical circuit density, current capacity, voltage rating, and mounting requirements.

Frequently Asked Questions (FAQ)

Q: Can the CBP-10 be used as a direct replacement for the JC6-P207-10?

A: Yes. Both parts share identical electrical ratings (20A, 300V), circuit count (10), pitch spacing (0.375"), termination methods (screw top, PC pin bottom), and mounting configurations. Both are UL94 V-0 rated and RoHS compliant.

Q: What is the primary difference between these two parts?

A: The CBP-10 operates at a maximum temperature of 140°C compared to the JC6-P207-10 at 105°C. The CBP-10 uses polyester thermoplastic insulation versus standard thermoplastic in the JC6-P207-10. Both differences favor the CBP-10 for higher-temperature applications.

Q: Are there any compatibility concerns with PCB mounting?

A: No. Both parts feature identical PC pin bottom termination and through-hole mounting specifications, ensuring direct compatibility with existing PCB layouts designed for either part number.

Q: Do these parts have different wire gauge limitations?

A: No. Both parts accommodate 12-22 AWG wire gauges identically.

Q: What is the significance of the different RoHS designations?

A: The JC6-P207-10 carries RoHS Compliant status, while the CBP-10 carries ROHS3 Compliant status. Both meet RoHS requirements; ROHS3 represents a more recent compliance designation. Both parts are suitable for RoHS-regulated applications.

Q: Are the screw termination specifications identical?

A: The JC6-P207-10 specifies steel terminal screws with zinc, clear chromate finish. The CBP-10 does not specify terminal screw finish details in the provided data. Both use screw-based top termination compatible with 12-22 AWG wire.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, provided the application does not exceed the thermal limits of the selected part. The CBP-10 is suitable for all applications within the JC6-P207-10 specification range, plus applications requiring operation up to 140°C.