JC6-P207-06 Equivalent & Substitute Parts

Part Overview

The JC6-P207-06 is a 6-circuit barrier block connector manufactured by TE Connectivity AMP Connectors. This terminal block features 0.375" (9.53mm) pitch spacing with screw termination on the top and PC pin termination on the bottom. The component is designed for chassis and panel mounting applications requiring 20A current capacity at 300V. The part maintains active product status and is RoHS compliant with UL94 V-0 flammability rating.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across manufacturers. Alternative sources become necessary for inventory availability, lead time optimization, or supply chain continuity in production environments.

Substiute Parts

JC6-P207-06

TE Connectivity AMP ConnectorsIn Stock: 865JC6-P207-06 Datasheet

Current PartRFQ

CBP-6

Curtis IndustriesIn Stock: 999CBP-6 Datasheet

SimilarRFQ

CBPW-6

Curtis IndustriesIn Stock: 1195CBPW-6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the JC6-P207-06 is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Requirements:

• Current Rating: 20A minimum
• Voltage Rating: 300V minimum
• Wire Gauge Acceptance: 12-22 AWG

Mechanical Compatibility Requirements:

• Terminal Block Type: Barrier Block
• Number of Circuits: 6
• Pitch: 0.375" (9.53mm)
• Barrier Type: 2 Wall (Dual)
• Bottom Termination: PC Pin
• Mounting Type: Chassis, Panel; Through Hole

Regulatory Compliance Requirements:

• Material Flammability Rating: UL94 V-0 minimum
• RoHS Compliance: Required

The substitute parts CBP-6 and CBPW-6, both manufactured by Curtis Industries, meet all critical electrical and mechanical parameters. Both maintain 20A current rating, 300V voltage rating, 6-circuit configuration, 0.375" pitch, dual-wall barrier construction, PC pin bottom termination, and UL94 V-0 flammability rating. Both are RoHS3 compliant, exceeding the RoHS compliance requirement of the main part.

Parameter Comparison

Engineering Selection Recommendations

JC6-P207-06 (TE Connectivity AMP Connectors): This part maintains active product status with established supply chain presence. RoHS compliance is confirmed. The 105°C operating temperature rating is suitable for standard industrial applications. Selection is appropriate when TE Connectivity supply chain preference or existing design validation is required.

CBP-6 (Curtis Industries): This substitute maintains full electrical and mechanical equivalence with the JC6-P207-06. ROHS3 compliance exceeds the RoHS requirement. The 140°C operating temperature rating provides thermal margin above the main part specification. Standard screw termination matches the JC6-P207-06 top termination design. Selection is appropriate for applications requiring Curtis Industries sourcing or enhanced thermal performance.

CBPW-6 (Curtis Industries): This substitute maintains full electrical and mechanical equivalence with the JC6-P207-06. ROHS3 compliance exceeds the RoHS requirement. The 140°C operating temperature rating provides thermal margin above the main part specification. The captive plate screw termination feature provides mechanical retention advantage over standard screws. Selection is appropriate for applications requiring Curtis Industries sourcing, enhanced thermal performance, or captive fastener design benefits.

All three parts are active products with confirmed inventory availability. Selection between alternatives is based on supply chain requirements, thermal performance needs, and termination feature preferences.

Frequently Asked Questions (FAQ)

Q: Can CBP-6 or CBPW-6 be used as direct replacements for JC6-P207-06 in existing designs?

A: Yes. Both Curtis Industries parts maintain equivalent electrical ratings (20A, 300V), mechanical configuration (6-circuit, 0.375" pitch, dual-wall barrier, PC pin termination), and regulatory compliance (UL94 V-0, RoHS). Physical mounting and electrical performance are interchangeable.

Q: What is the difference between CBP-6 and CBPW-6?

A: The primary difference is the top termination design. CBP-6 features standard screws, while CBPW-6 features screws with a captive plate. Both maintain identical electrical ratings, circuit count, pitch, and barrier construction. The captive plate in CBPW-6 provides mechanical retention of the fastener.

Q: Are there operating temperature differences between the main part and substitutes?

A: Yes. JC6-P207-06 is rated to 105°C, while both CBP-6 and CBPW-6 are rated to 140°C. The higher temperature rating of the Curtis Industries parts provides additional thermal margin for applications operating near the upper temperature limit.

Q: Do all three parts have the same wire gauge acceptance?

A: Yes. JC6-P207-06, CBP-6, and CBPW-6 all accept 12-22 AWG wire gauge, ensuring consistent conductor compatibility across all three options.

Q: What is the significance of ROHS3 compliance on the substitute parts?

A: ROHS3 compliance on CBP-6 and CBPW-6 represents an enhanced RoHS standard exceeding the RoHS compliance requirement of JC6-P207-06. This provides assurance of compliance with current and future regulatory requirements.

Q: Are the insulation materials different between the main part and substitutes?

A: Yes. JC6-P207-06 uses thermoplastic insulation, while CBP-6 and CBPW-6 use polyester thermoplastic insulation. Both materials meet UL94 V-0 flammability requirements and maintain equivalent electrical performance.

Q: Can these parts be mixed in the same application?

A: Yes. All three parts maintain equivalent electrical and mechanical parameters, allowing mixed deployment within the same circuit or system without performance degradation.

Q: What inventory levels are available for each part?

A: JC6-P207-06 has 807 pieces in stock. CBP-6 has 943 pieces in stock. CBPW-6 has 1134 pieces in stock. All parts are available as new original components.