JC6-P108-04 Equivalent & Substitute Parts

Part Overview

The JC6-P108-04 is a 4-circuit barrier block connector manufactured by TE Connectivity AMP Connectors. This terminal block features 0.375" (9.53mm) pitch spacing with screw termination and captive plate design for top-side wire entry and PC pin bottom termination. The component is rated for 20A at 300V and accommodates 12-22 AWG wire gauges. Product status is Active with 705 units currently in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for circuit board assembly, system redesign, or component availability scenarios.

Substiute Parts

JC6-P108-04

TE Connectivity AMP ConnectorsIn Stock: 779JC6-P108-04 Datasheet

Current PartRFQ

CB20220407

Eaton - Electronics DivisionIn Stock: 762CB20220407 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the JC6-P108-04 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Terminal Block Type: Barrier Block
• Number of Circuits: 4
• Pitch: 0.375" (9.53mm)
• Voltage Rating: 300V
• Wire Gauge Compatibility: 12-22 AWG
• Top Termination: Screws with Captive Plate
• Bottom Termination: PC Pin
• Mounting Type: Through Hole
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant

Allowable Variation Parameters:

• Current Rating: Substitute parts with equal or higher current capacity are acceptable
• Operating Temperature Range: Substitute parts with equal or wider temperature range are acceptable
• Barrier Type: Variations in barrier wall configuration (2-wall vs. 3-wall) are acceptable provided all other parameters match
• Terminal Screw Finish: Variations in finish specification are acceptable

The CB20220407 from Eaton - Electronics Division meets all mandatory matching parameters and qualifies as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

Primary Component: JC6-P108-04

The JC6-P108-04 is Active status with 705 units in stock. This component is ROHS3 compliant and carries UL94 V-0 flammability certification. The part is suitable for applications requiring 20A continuous current at 300V with operating temperatures to 105°C.

Substitute Component: CB20220407

The CB20220407 from Eaton - Electronics Division is Active status with 693 units in stock. This component is ROHS3 compliant and carries UL94 V-0 flammability certification. The substitute provides higher current capacity (30A versus 20A) and extended operating temperature range (-40°C to 105°C versus 105°C maximum). The CB20220407 features a 3-wall barrier configuration compared to the 2-wall design of the primary part. Both components share identical pitch, circuit count, voltage rating, wire gauge compatibility, and termination methods.

Selection between these components is based on application current requirements and environmental temperature specifications. The CB20220407 is suitable for applications requiring higher current capacity or extended low-temperature operation.

Frequently Asked Questions (FAQ)

Q: Can the CB20220407 be used as a direct replacement for the JC6-P108-04 in existing circuit board designs?

A: Yes. Both components share identical pitch spacing (0.375"), circuit count (4), voltage rating (300V), wire gauge compatibility (12-22 AWG), and PC pin footprint. The through-hole mounting configuration is identical. Physical board layout compatibility is maintained.

Q: What is the significance of the barrier type difference (2-wall versus 3-wall)?

A: The barrier type refers to the internal wall configuration separating circuits. The 3-wall design in the CB20220407 provides additional circuit isolation compared to the 2-wall design in the JC6-P108-04. Both configurations meet the same voltage and flammability ratings. The 3-wall configuration does not affect electrical compatibility or mechanical fit.

Q: Why does the CB20220407 have a higher current rating (30A versus 20A)?

A: The higher current rating reflects the thermal and electrical design characteristics of the Eaton component. Applications requiring only 20A operation are fully compatible with the CB20220407. The higher rating provides additional design margin for current-limited applications.

Q: Are there packaging differences between these components?

A: The JC6-P108-04 is specified with packaging designation "-" (not provided). The CB20220407 is specified as Bulk packaging. Packaging differences do not affect electrical or mechanical compatibility.

Q: Do both components meet the same compliance standards?

A: Yes. Both the JC6-P108-04 and CB20220407 are ROHS3 compliant, carry UL94 V-0 flammability certification, and share identical ECCN (EAR99) and HTSUS (8536.90.4000) classifications.

Q: What is the operating temperature consideration for component selection?

A: The JC6-P108-04 operates to 105°C maximum. The CB20220407 operates from -40°C to 105°C. Applications requiring low-temperature operation below 0°C require the CB20220407. Applications limited to 0°C and above are compatible with either component.