JC6-P107-06 Equivalent & Substitute Parts

Part Overview

The JC6-P107-06 is a 6-circuit barrier block connector manufactured by TE Connectivity AMP Connectors. This component features a 0.375" (9.53mm) pitch with screw termination on the top and PC pin termination on the bottom. The part is classified as obsolete, necessitating identification of active equivalent and substitute components for ongoing applications and new designs.

Key Parameters

Parameter	Value
Manufacturer Part Number	JC6-P107-06
Manufacturer	TE Connectivity AMP Connectors
Category	Terminal Blocks
Terminal Block Type	Barrier Block
Number of Circuits	6
Pitch	0.375" (9.53mm)
Current Rating	20A
Voltage Rating	300V
Wire Gauge	12-22 AWG
Top Termination	Screws
Bottom Termination	PC Pin
Barrier Type	2 Wall (Dual)
Mounting Type	Through Hole
Operating Temperature	105°C
Material - Insulation	Thermoplastic
Flammability Rating	UL94 V-0
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the JC6-P107-06 is determined by the following critical parameters:

Primary Compatibility Criteria:

Terminal block type (Barrier Block)
Number of circuits (6)
Pitch specification (0.375" / 9.53mm nominal)
Number of wire entries (6)
Number of rows (1)
Wire gauge acceptance (12-22 AWG)
Bottom termination (PC Pin)
Barrier type (2 Wall Dual)
Mounting type (Through Hole)
Flammability rating (UL94 V-0)

Secondary Consideration Parameters:

Current rating (minimum 20A)
Voltage rating (minimum 300V)
Operating temperature range
RoHS compliance status

The substitute parts listed maintain compatibility across all primary criteria. Variations in current rating, terminal screw material, and operating temperature range do not preclude functional substitution when application requirements are within the substitute part specifications.

Parameter Comparison

Parameter	JC6-P107-06 (Main)	A20220604A7	A202206A8	LP20210604MP	OSTYK50406230
Manufacturer	TE Connectivity	Eaton	Eaton	Eaton	On Shore Technology
Number of Circuits	6	6	6	6	6
Pitch	0.375" (9.53mm)	0.375" (9.53mm)	0.375" (9.53mm)	0.375" (9.53mm)	0.374" (9.50mm)
Number of Rows	1	1	1	1	1
Current Rating (Amps)	20A	30A	30A	30A	20A
Voltage Rating	300V	300V	300V	150V	300V
Wire Gauge	12-22 AWG	12-22 AWG	12-22 AWG	12-22 AWG	12-22 AWG
Top Termination	Screws	Screws	Screws with Quick Connect Tabs	Screws	Screws with Captive Plate
Bottom Termination	PC Pin	PC Pin	PC Pin	PC Pin	PC Pin
Barrier Type	2 Wall (Dual)	2 Wall (Dual)	2 Wall (Dual)	2 Wall (Dual)	2 Wall (Dual)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Operating Temperature	105°C	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 115°C
Material - Insulation	Thermoplastic	Thermoplastic	Thermoplastic	Thermoplastic	Thermoplastic
Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Product Status	Obsolete	Active	Active	Active	Active
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

A20220604A7 (Eaton - Electronics Division)

This substitute provides direct functional equivalence with enhanced current rating (30A versus 20A). The part maintains 300V voltage rating and accepts 12-22 AWG wire gauge. Operating temperature range extends to -40°C, providing broader environmental compatibility. ROHS3 compliance and active product status support long-term availability and supply chain continuity.

A202206A8 (Eaton - Electronics Division)

This substitute incorporates quick connect tabs on the top termination, providing an alternative connection interface while maintaining all core electrical specifications. Current rating of 30A and 300V voltage rating exceed the original part requirements. Active product status and ROHS3 compliance ensure ongoing manufacturability. This option is suitable for applications where quick connect functionality provides assembly or maintenance advantages.

LP20210604MP (Eaton - Electronics Division)

This substitute features a flange mounting configuration and operates at 150V voltage rating, which is lower than the original 300V specification. Current rating of 30A exceeds original requirements. This option is suitable for applications with voltage requirements at or below 150V. Active product status and ROHS3 compliance are confirmed.

OSTYK50406230 (On Shore Technology Inc.)

This substitute maintains the 20A current rating and 300V voltage rating of the original part. The pitch specification of 0.374" (9.50mm) represents a 0.03mm deviation from the original 0.375" (9.53mm) specification. The part includes a captive plate feature and operates across an extended temperature range (-40°C to 115°C). Active product status and ROHS3 compliance are confirmed. This option provides the closest electrical rating match to the original component.

Frequently Asked Questions (FAQ)

Q: Can A20220604A7 be used as a direct replacement for JC6-P107-06?

A: Yes. A20220604A7 maintains all primary compatibility criteria including 6 circuits, 0.375" pitch, 12-22 AWG wire gauge acceptance, PC pin bottom termination, and 2 Wall dual barrier type. The 30A current rating and 300V voltage rating meet or exceed the original 20A/300V specification. Both parts feature UL94 V-0 flammability rating and thermoplastic insulation.

Q: What is the pitch difference between OSTYK50406230 and JC6-P107-06?

A: OSTYK50406230 specifies a pitch of 0.374" (9.50mm) compared to the original 0.375" (9.53mm). This represents a 0.03mm deviation. Both pitches fall within the 0.375" nominal specification range for 6-circuit barrier block connectors of this class.

Q: Why does LP20210604MP have a lower voltage rating?

A: LP20210604MP is rated for 150V operation, which is lower than the original 300V specification. This part is suitable for applications with voltage requirements at or below 150V. Applications requiring 300V operation should select A20220604A7, A202206A8, or OSTYK50406230.

Q: Are all substitute parts RoHS compliant?

A: Yes. All substitute parts carry ROHS3 compliance certification. The original JC6-P107-06 is RoHS compliant. All parts meet current environmental and regulatory requirements.

Q: What is the difference between A202206A8 and A20220604A7?

A: Both parts are manufactured by Eaton and maintain identical electrical specifications (30A, 300V, 12-22 AWG). The primary difference is the top termination: A202206A8 features screws with quick connect tabs, while A20220604A7 features standard screws. Terminal screw material also differs (Steel with Zinc finish for A202206A8 versus Brass with Nickel finish for A20220604A7).

Q: Can OSTYK50406230 be used in applications requiring 115°C operation?

A: Yes. OSTYK50406230 is rated for operating temperatures up to 115°C, exceeding the original part's 105°C maximum. This part is suitable for high-temperature applications within the 115°C limit.

Q: What mounting configuration do all substitute parts use?

A: All substitute parts use through-hole mounting, consistent with the original JC6-P107-06. No PCB layout modifications are required for substitution.

Q: Are there packaging differences between the main part and substitutes?

A: The original JC6-P107-06 packaging is not specified in the provided data. All substitute parts are supplied in bulk packaging. Consult specific procurement requirements for packaging quantity and configuration needs.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message