JC26C2-DSR16E CompactFlash Card Connector Equivalent & Substitute Parts

Part Overview

The JC26C2-DSR16E is an active CompactFlash Type I/II snap-in card connector manufactured by JAE Electronics. This connector is designed for push-in/push-out insertion with right-side ejector functionality and integrated card guides. The part is RoHS compliant with MSL 1 rating, indicating unlimited moisture tolerance suitable for standard storage and handling conditions. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling direct replacement in applications where the primary part becomes unavailable or inventory constraints require alternative sourcing.

Substiute Parts

JC26C2-DSR16E

JAE ElectronicsIn Stock: 1016JC26C2-DSR16E Datasheet

Current PartRFQ

JC26E-DSRE

JAE ElectronicsIn Stock: 783JC26E-DSRE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the JC26C2-DSR16E is determined by strict alignment of the following critical parameters:

• Card Type Compatibility: Both main and substitute parts must support CompactFlash Type I and Type II standards
• Connector Mechanism: Ejector-type connectors with push-in/push-out insertion method
• Ejector Orientation: Right-side ejector configuration
• Mounting Architecture: Snap-in mounting with top-mounted standard positioning
• Physical Features: Integrated card guides for proper card alignment
• Environmental Compliance: RoHS compliance status and MSL rating for handling and storage conditions
• Packaging Format: Tray packaging for component distribution

The substitute part JC26E-DSRE meets all these criteria, differing only in series designation (JC26E versus JC26C2) while maintaining identical functional and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the JC26C2-DSR16E and JC26E-DSRE maintain active product status with full RoHS compliance. The JC26E-DSRE carries ROHS3 certification, representing the current RoHS directive iteration, while the main part holds standard RoHS compliance. Both parts share identical MSL 1 ratings and EAR99 export classification. Selection between these parts should be based on inventory availability and compliance requirements specific to the end application. The JC26E-DSRE represents the current-generation equivalent within the JAE Electronics CompactFlash connector portfolio.

Frequently Asked Questions (FAQ)

Q: Can JC26E-DSRE directly replace JC26C2-DSR16E in existing designs?

A: Yes. Both connectors share identical card type support (CompactFlash Type I/II), ejector configuration, insertion method, mounting type, and physical features. The series designation change reflects product line evolution rather than functional modification.

Q: What is the significance of ROHS3 compliance on the substitute part?

A: ROHS3 represents compliance with the current RoHS directive iteration. Both parts meet RoHS requirements; the substitute reflects current manufacturing standards. This does not affect electrical or mechanical compatibility.

Q: Are there differences in handling or storage between these parts?

A: No. Both parts carry MSL 1 rating, indicating unlimited moisture tolerance. Storage and handling procedures are identical.

Q: Does the series change (JC26C2 to JC26E) affect PCB footprint or mounting?

A: No. Both parts use identical snap-in mounting with top-mounted standard positioning. PCB layout and mounting procedures remain unchanged.

Q: What packaging format is used for both parts?

A: Both the JC26C2-DSR16E and JC26E-DSRE are supplied in tray packaging for component distribution and handling.