JBXPC1G06FSSDSR Equivalent & Substitute Parts

Part Overview

The JBXPC1G06FSSDSR is a 6-position circular connector receptacle manufactured by Souriau-Sunbank by Eaton. This female socket connector features solder cup termination and is designed for industrial, instrumentation, medical, and telecommunications applications. The connector is currently in active production status with 1171 pieces available in new original inventory.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across connector type, position count, termination method, fastening mechanism, and material specifications. Alternative sources ensure supply chain flexibility and component availability for system integration and maintenance requirements.

Substiute Parts

JBXPC1G06FSSDSR

Souriau-Sunbank by EatonIn Stock: 1265JBXPC1G06FSSDSR Datasheet

Current PartRFQ

PHG.1B.306.CLLD62

LEMOIn Stock: 964PHG.1B.306.CLLD62 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the JBXPC1G06FSSDSR is determined by strict equivalence across the following parameters:

Primary Substitution Criteria:

• Connector type must be receptacle with female sockets
• Position count must equal 6
• Termination method must be solder cup
• Fastening mechanism must be push-pull
• Shell material must be brass
• Contact finish at mating surface must be gold
• Current rating must be 7A or greater
• Shielding configuration must be shielded
• Insert material must be PEEK
• Flammability rating must be UL94 V-0
• RoHS3 compliance required

The substitute part PHG.1B.306.CLLD62 (LEMO) meets all primary substitution criteria and is classified as an equivalent alternative for the JBXPC1G06FSSDSR.

Parameter Comparison

Engineering Selection Recommendations

Both the JBXPC1G06FSSDSR and PHG.1B.306.CLLD62 are active production components with ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for industrial and telecommunications applications.

The JBXPC1G06FSSDSR operates within -40°C to 125°C and carries a specified voltage rating of 660V. The PHG.1B.306.CLLD62 operates across a wider temperature range (-55°C to 250°C) with no specified voltage rating in the provided data.

Contact finish thickness differs between the two parts: JBXPC1G06FSSDSR provides 19.7µin (0.50µm) gold plating, while PHG.1B.306.CLLD62 provides 59.0µin (1.50µm) gold plating. The thicker plating on the LEMO part provides extended contact durability under repeated mating cycles.

Both connectors share identical electrical ratings (7A current), identical mechanical configuration (6-position, push-pull, solder cup), and identical material specifications (brass shell, PEEK insert, shielded design, UL94 V-0 rating).

Selection between these parts depends on application-specific temperature requirements and contact durability expectations. The JBXPC1G06FSSDSR is suitable for standard industrial temperature ranges. The PHG.1B.306.CLLD62 is suitable for extended temperature applications and high-cycle mating environments.

Frequently Asked Questions (FAQ)

Q: What makes PHG.1B.306.CLLD62 a valid substitute for JBXPC1G06FSSDSR?

A: Both connectors are 6-position receptacles with female sockets, solder cup termination, push-pull fastening, brass shells with gold-plated contacts, 7A current rating, shielded design, PEEK inserts, and UL94 V-0 flammability rating. These parameters define functional equivalence for circular connector receptacles in this category.

Q: Are there differences in mechanical compatibility?

A: Both connectors use identical fastening (push-pull) and termination (solder cup) methods. Shell size designations differ (1 versus 306), reflecting manufacturer-specific dimensional standards. Physical mating compatibility depends on connector plug design and must be verified against the specific plug connector used in the application.

Q: How do the operating temperature ranges differ?

A: The JBXPC1G06FSSDSR operates from -40°C to 125°C. The PHG.1B.306.CLLD62 operates from -55°C to 250°C. Applications requiring operation below -40°C or above 125°C require the LEMO part. Standard industrial applications within -40°C to 125°C can use either part.

Q: What is the significance of contact finish thickness?

A: The JBXPC1G06FSSDSR provides 0.50µm gold plating; the PHG.1B.306.CLLD62 provides 1.50µm gold plating. Thicker plating extends contact life in high-cycle mating applications and provides enhanced corrosion resistance. Standard applications use either thickness; high-reliability or high-cycle applications benefit from the thicker LEMO plating.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both the JBXPC1G06FSSDSR and PHG.1B.306.CLLD62 are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for industrial and telecommunications markets.

Q: What is the voltage rating difference?

A: The JBXPC1G06FSSDSR specifies 660V. The PHG.1B.306.CLLD62 voltage rating is not specified in the provided data. For applications requiring explicit voltage rating documentation, the JBXPC1G06FSSDSR is the specified choice.

Q: Can these connectors be used interchangeably in existing designs?

A: Electrical and mechanical substitution is valid based on the parameters provided. Physical mating compatibility with existing plug connectors must be verified independently, as shell size designations differ between manufacturers.