JBXFD2G06MSSDSR Equivalent & Substitute Parts

Part Overview

The JBXFD2G06MSSDSR is a 6-position circular connector plug manufactured by Souriau-Sunbank by Eaton, featuring male pins with solder cup termination. This connector is designed for industrial, instrumentation, medical, and telecommunications applications requiring shielded connections with push-pull fastening. The part is currently active in production with 933 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when specific cable opening requirements necessitate alternative configurations.

Substiute Parts

JBXFD2G06MSSDSR

Souriau-Sunbank by EatonIn Stock: 969JBXFD2G06MSSDSR Datasheet

Current PartRFQ

FGG.2B.306.CLAD52

LEMOIn Stock: 1170FGG.2B.306.CLAD52 Datasheet

SimilarRFQ

FGG.2B.306.CLAD62

LEMOIn Stock: 1039FGG.2B.306.CLAD62 Datasheet

SimilarRFQ

FGG.2B.306.CLAD72

LEMOIn Stock: 841FGG.2B.306.CLAD72 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the JBXFD2G06MSSDSR are identified from the LEMO 2B series based on strict electrical and mechanical compatibility criteria. The following parameters determine substitution eligibility:

Core Compatibility Parameters:

• Number of Positions: 6 (exact match required)
• Connector Type: Plug, Male Pins (exact match required)
• Termination: Solder Cup (exact match required)
• Fastening Type: Push-Pull (exact match required)
• Shielding: Shielded (exact match required)
• Current Rating: 12A (exact match required)
• Contact Finish - Mating: Gold (exact match required)
• Shell Material: Brass (exact match required)
• Insert Material: PEEK (exact match required)
• Flammability Rating: UL94 V-0 (exact match required)
• Mounting Type: Free Hanging (In-Line) (exact match required)

Substitute Parts:

• FGG.2B.306.CLAD52 (Cable Opening: 0.165" ~ 0.205" / 4.20mm ~ 5.20mm)
• FGG.2B.306.CLAD62 (Cable Opening: 0.205" ~ 0.244" / 5.20mm ~ 6.20mm)
• FGG.2B.306.CLAD72 (Cable Opening: 0.244" ~ 0.283" / 6.20mm ~ 7.20mm)

All substitute parts are manufactured by LEMO and belong to the 2B series. Substitution is valid when cable opening specifications align with application requirements.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts (FGG.2B.306.CLAD52, FGG.2B.306.CLAD62, FGG.2B.306.CLAD72) maintain active product status and ROHS3 compliance equivalent to the primary part JBXFD2G06MSSDSR. Selection among substitute options is determined by cable opening requirements:

FGG.2B.306.CLAD52 is suitable for cable diameters within 0.165" to 0.205" (4.20mm to 5.20mm).

FGG.2B.306.CLAD62 is suitable for cable diameters within 0.205" to 0.244" (5.20mm to 6.20mm).

FGG.2B.306.CLAD72 is suitable for cable diameters within 0.244" to 0.283" (6.20mm to 7.20mm).

All substitute parts provide enhanced operating temperature range (-55°C to 250°C) compared to the primary part (-40°C to 125°C) and improved ingress protection rating (IP50 versus IP40). Contact finish thickness on substitute parts is 39.4µin (1.00µm) compared to 19.7µin (0.50µm) on the primary part.

Frequently Asked Questions (FAQ)

Q: What determines whether FGG.2B.306.CLAD52, FGG.2B.306.CLAD62, or FGG.2B.306.CLAD72 can substitute for JBXFD2G06MSSDSR?

A: The primary determining factor is cable opening compatibility. Each LEMO substitute part accommodates a specific cable diameter range. Selection must match the cable diameter used in the application. All three variants maintain identical electrical specifications (12A current rating, 6 positions, solder cup termination, push-pull fastening, shielded configuration).

Q: Are there electrical performance differences between the primary part and substitute parts?

A: No. All parts share identical current rating (12A), connector type (6-position plug with male pins), termination method (solder cup), fastening mechanism (push-pull), and shielding configuration. The primary part specifies 900V voltage rating; substitute parts do not specify voltage rating in the provided data.

Q: What is the difference in operating temperature range?

A: The primary part JBXFD2G06MSSDSR operates from -40°C to 125°C. All three LEMO substitute parts operate from -55°C to 250°C, providing extended temperature capability. Application requirements determine whether this difference is relevant.

Q: How do ingress protection ratings differ?

A: The primary part provides IP40 protection (dust protected). All LEMO substitute parts provide IP50 protection (dust protected). IP50 represents enhanced dust ingress protection compared to IP40.

Q: What is the significance of contact finish thickness differences?

A: The primary part specifies 19.7µin (0.50µm) gold contact finish thickness. LEMO substitute parts specify 39.4µin (1.00µm) gold contact finish thickness. Thicker contact plating provides extended contact life and improved wear resistance.

Q: Are all parts RoHS3 compliant?

A: Yes. The primary part JBXFD2G06MSSDSR and all three substitute parts (FGG.2B.306.CLAD52, FGG.2B.306.CLAD62, FGG.2B.306.CLAD72) are ROHS3 compliant.

Q: What is the inventory status for each part?

A: JBXFD2G06MSSDSR: 933 units in stock. FGG.2B.306.CLAD52: 1115 units in stock. FGG.2B.306.CLAD62: 1029 units in stock. FGG.2B.306.CLAD72: 755 units in stock.

Q: Can substitute parts be used interchangeably with the primary part?

A: Substitution is valid only when cable opening specifications align with application requirements. The three LEMO variants accommodate different cable diameter ranges and are not interchangeable with each other. Selection must be based on the specific cable diameter used in the application.