JBXFD1G07MWSDSR Equivalent & Substitute Parts

Part Overview

The JBXFD1G07MWSDSR is a 7-position circular connector plug with male pins manufactured by Souriau-Sunbank by Eaton. This connector is designed for industrial, instrumentation, medical, and telecommunications applications requiring shielded, push-pull fastening connections. The part is currently active in production with 701 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when application-specific termination requirements necessitate alternative configurations.

Substiute Parts

JBXFD1G07MWSDSR

Souriau-Sunbank by EatonIn Stock: 797JBXFD1G07MWSDSR Datasheet

Current PartRFQ

FGG.1B.307.CLAD42

LEMOIn Stock: 775FGG.1B.307.CLAD42 Datasheet

SimilarRFQ

FGG.1B.307.CLAD52Z

PEI-GenesisIn Stock: 1253FGG.1B.307.CLAD52Z Datasheet

SimilarRFQ

FGG.1B.307.CLAD62

LEMOIn Stock: 1007FGG.1B.307.CLAD62 Datasheet

SimilarRFQ

FGG.1B.307.CLAD72

LEMOIn Stock: 1075FGG.1B.307.CLAD72 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the JBXFD1G07MWSDSR are qualified based on the following critical parameters that determine functional equivalence:

Core Compatibility Parameters:

• Connector Type: Plug, Male Pins
• Number of Positions: 7
• Shell Size - Insert: 307 (equivalent to size 1)
• Fastening Type: Push-Pull
• Orientation: G
• Primary Material: Metal with Brass shell
• Contact Finish - Mating: Gold
• Shielding: Shielded
• Current Rating: 7A
• Insert Material: Polyetheretherketone (PEEK)
• Compliance: ROHS3 Compliant, REACH Unaffected

Termination Variation: Substitute parts utilize Solder Cup termination instead of the push-pull termination of the main part. This represents a functional alternative for applications where solder termination is preferred or required.

Cable Opening Variations: Substitute parts are differentiated by cable opening specifications (CLAD42, CLAD52Z, CLAD62, CLAD72), accommodating different cable diameters while maintaining all other electrical and mechanical characteristics.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection: The JBXFD1G07MWSDSR remains the specified part for applications requiring push-pull termination with the original manufacturer's design. This part is active in production and maintains full compliance with ROHS3 and REACH requirements.

Substitute Selection Criteria:

FGG.1B.307.CLAD42 is suitable for applications requiring solder cup termination with cable diameters between 3.10mm and 4.20mm. This LEMO part maintains all core electrical specifications and compliance certifications.

FGG.1B.307.CLAD52Z is suitable for applications requiring solder cup termination with mid-range cable diameters. This PEI-Genesis part maintains all core electrical specifications and compliance certifications.

FGG.1B.307.CLAD62 is suitable for applications requiring solder cup termination with cable diameters between 5.20mm and 6.20mm. This LEMO part maintains all core electrical specifications and compliance certifications.

FGG.1B.307.CLAD72 is suitable for applications requiring solder cup termination with cable diameters between 6.20mm and 7.20mm. This LEMO part maintains all core electrical specifications and compliance certifications.

All substitute parts are ROHS3 compliant and REACH unaffected, meeting regulatory requirements equivalent to the primary part.

Frequently Asked Questions (FAQ)

Q: What is the primary difference between the JBXFD1G07MWSDSR and the FGG substitute parts?

A: The primary difference is termination type. The JBXFD1G07MWSDSR uses push-pull termination, while all FGG substitute parts use solder cup termination. Both termination types are compatible with the same connector interface and pin configuration.

Q: How do I select the correct FGG substitute part based on cable diameter?

A: Select the FGG part based on your cable opening requirement. FGG.1B.307.CLAD42 accommodates 3.10mm to 4.20mm cables, CLAD52Z accommodates mid-range diameters, CLAD62 accommodates 5.20mm to 6.20mm cables, and CLAD72 accommodates 6.20mm to 7.20mm cables.

Q: Are all substitute parts compliant with the same regulatory standards?

A: Yes. All substitute parts listed are ROHS3 compliant and REACH unaffected, matching the compliance status of the primary JBXFD1G07MWSDSR part.

Q: Can I use a substitute part if my application specifies the JBXFD1G07MWSDSR?

A: Substitution is permissible only when the application requirements allow solder cup termination instead of push-pull termination, and when the cable diameter falls within the specified opening range of the selected substitute part.

Q: What is the operating temperature range for substitute parts?

A: LEMO substitute parts (CLAD42, CLAD62, CLAD72) operate from -55°C to 250°C, which exceeds the primary part's -40°C to 125°C range. The PEI-Genesis CLAD52Z operating temperature is not specified in available documentation.

Q: Are all parts available in stock?

A: Yes. The primary part JBXFD1G07MWSDSR has 701 units in stock. Substitute parts have the following inventory: FGG.1B.307.CLAD42 (758 units), FGG.1B.307.CLAD52Z (1236 units), FGG.1B.307.CLAD62 (967 units), and FGG.1B.307.CLAD72 (1043 units).