JBXFD1A06MSSDSMR Equivalent & Substitute Parts

Part Overview

The JBXFD1A06MSSDSMR is a 6-position circular connector plug manufactured by Souriau-Sunbank by Eaton. This connector features male pins with solder cup termination, gold-plated mating contacts, and a shielded design rated for 7A at 660V. The product is active and ROHS3 compliant, suitable for industrial, instrumentation, medical, and telecommunications applications.

Equivalent and substitute parts are identified when alternative manufacturers offer circular connectors with matching electrical specifications, mechanical compatibility, and termination methods. Substitution ensures design flexibility and supply chain continuity while maintaining performance requirements.

Substiute Parts

JBXFD1A06MSSDSMR

Souriau-Sunbank by EatonIn Stock: 767JBXFD1A06MSSDSMR Datasheet

Current PartRFQ

FFA.1S.306.CLAC62

LEMOIn Stock: 788FFA.1S.306.CLAC62 Datasheet

SimilarRFQ

FGG.1B.306.CLAD42

PEI-GenesisIn Stock: 988FGG.1B.306.CLAD42 Datasheet

SimilarRFQ

FGG.1B.306.CLAD52Z

PEI-GenesisIn Stock: 1005FGG.1B.306.CLAD52Z Datasheet

SimilarRFQ

FGG.1B.306.CLAD72

LEMOIn Stock: 1134FGG.1B.306.CLAD72 Datasheet

SimilarRFQ

FGG.1B.306.CLAZ

PEI-GenesisIn Stock: 1195FGG.1B.306.CLAZ Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the JBXFD1A06MSSDSMR is determined by the following critical parameters:

Electrical Compatibility: Current rating of 7A, gold-plated mating contacts, and shielded construction are mandatory for direct substitution.

Mechanical Compatibility: 6-position configuration, solder cup termination, push-pull fastening, and free-hanging mounting type must be maintained.

Material & Compliance: PEEK insert material, UL94 V-0 flammability rating, and ROHS3 compliance are required specifications.

Connector Orientation: The main part specifies orientation A. Substitute parts with different orientation designations (Keyed, G) represent mechanical variations that affect mating interface geometry and may require design verification.

The following substitute parts meet the core electrical and mechanical requirements:

• FGG.1B.306.CLAD72 (LEMO): Direct functional equivalent with matching connector type, position count, and termination
• FFA.1S.306.CLAC62 (LEMO): Functionally compatible with female sockets and male pins configuration
• FGG.1B.306.CLAD42 (PEI-Genesis): 6-position circular connector with solder cup termination
• FGG.1B.306.CLAD52Z (PEI-Genesis): 6-position circular connector with solder cup termination
• FGG.1B.306.CLAZ (PEI-Genesis): 6-position circular connector with solder cup termination

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute - FGG.1B.306.CLAD72 (LEMO): This part provides the closest functional equivalence to the JBXFD1A06MSSDSMR. Both are 6-position male pin plugs with solder cup termination, gold-plated contacts, push-pull fastening, and shielded construction. Both maintain ROHS3 compliance and UL94 V-0 flammability rating. The FGG.1B.306.CLAD72 offers an extended operating temperature range (-55°C ~ 250°C) compared to the main part (-40°C ~ 125°C), providing broader environmental capability. Contact finish thickness on the FGG.1B.306.CLAD72 is 39.4µin (1.00µm), compared to 19.7µin (0.50µm) on the main part.

Secondary Substitute - FFA.1S.306.CLAC62 (LEMO): This connector maintains electrical compatibility with 7A current rating and gold-plated contacts. The configuration includes female sockets and male pins, representing a different connector interface type. Operating temperature range extends to -55°C ~ 250°C. Ingress protection is rated IP50 (dust protected) compared to IP40 on the main part. This part is suitable when the female socket configuration is compatible with system requirements.

Tertiary Substitutes - PEI-Genesis Parts (FGG.1B.306.CLAD42, FGG.1B.306.CLAD52Z, FGG.1B.306.CLAZ): These parts are listed as 6-position circular connectors with solder cup termination and are active products. Detailed electrical specifications (current rating, voltage rating, contact finish) are not provided in the available data. These parts are suitable for substitution only when complete technical specifications are obtained and verified to match application requirements.

All substitute parts maintain ROHS3 compliance and REACH unaffected status, consistent with regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can FGG.1B.306.CLAD72 directly replace JBXFD1A06MSSDSMR in existing designs?

A: FGG.1B.306.CLAD72 is functionally equivalent for electrical performance (7A current, gold-plated contacts, push-pull fastening, shielded design). Both are 6-position male pin solder cup connectors with PEEK inserts and UL94 V-0 rating. Mechanical compatibility depends on connector orientation and shell size specifications. The orientation designation differs (A versus G), which affects mating interface geometry. Physical verification of connector mating surfaces is required before implementation.

Q: What is the difference between FFA.1S.306.CLAC62 and the main part?

A: FFA.1S.306.CLAC62 features a female sockets and male pins configuration, whereas JBXFD1A06MSSDSMR is male pins only. Both maintain 7A current rating and gold-plated mating contacts. FFA.1S.306.CLAC62 provides IP50 ingress protection (dust protected) compared to IP40 on the main part. Operating temperature range is extended (-55°C ~ 250°C). This part is compatible when the system design accommodates the female socket interface.

Q: Are PEI-Genesis parts (FGG.1B.306.CLAD42, FGG.1B.306.CLAD52Z, FGG.1B.306.CLAZ) suitable substitutes?

A: These parts are 6-position circular connectors with solder cup termination and active product status. Complete electrical specifications (current rating, voltage rating, contact finish thickness) are not provided in available documentation. Substitution requires verification that these parts meet the 7A current rating, 660V voltage rating, and gold-plated contact finish requirements of the main part. Contact the manufacturer for complete technical specifications before selection.

Q: What does the orientation designation (A, G, Keyed) mean?

A: Orientation designations define the mechanical keying and mating interface geometry of the connector. Orientation A on the main part differs from orientation G on FGG.1B.306.CLAD72 and keyed configuration on FFA.1S.306.CLAC62. These differences affect physical mating compatibility. Connectors with different orientations may not mate with existing receptacles. Mechanical compatibility must be verified through connector interface drawings and physical testing.

Q: What is the significance of contact finish thickness differences?

A: Contact finish thickness affects durability and wear resistance. JBXFD1A06MSSDSMR specifies 19.7µin (0.50µm) gold plating, while FGG.1B.306.CLAD72 specifies 39.4µin (1.00µm). Thicker plating provides extended contact life and improved resistance to corrosion and wear. Both thicknesses meet gold plating standards for circular connectors. Selection depends on application cycle life requirements and environmental exposure.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. JBXFD1A06MSSDSMR, FGG.1B.306.CLAD72, and FFA.1S.306.CLAC62 are all ROHS3 compliant. PEI-Genesis parts (FGG.1B.306.CLAD42, FGG.1B.306.CLAD52Z, FGG.1B.306.CLAZ) do not have RoHS status specified in available data. Compliance verification is required before selection for applications with RoHS requirements.

Q: What inventory levels are available for these parts?

A: JBXFD1A06MSSDSMR: 709 pcs; FGG.1B.306.CLAD72: 1104 pcs; FFA.1S.306.CLAC62: 771 pcs; FGG.1B.306.CLAD42: 928 pcs; FGG.1B.306.CLAD52Z: 993 pcs; FGG.1B.306.CLAZ: 1172 pcs. All parts are listed as new original stock.