JBXFD1A06MCSDSMR Equivalent & Substitute Parts

Part Overview

The JBXFD1A06MCSDSMR is a 6-position circular connector plug manufactured by Souriau-Sunbank by Eaton, featuring male pins with crimp termination. This connector is designed for industrial, instrumentation, medical, and telecommunications applications requiring shielded connections with push-pull fastening. The part maintains active product status with 766 units in current inventory. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when specific cable opening requirements necessitate alternative configurations.

Substiute Parts

JBXFD1A06MCSDSMR

Souriau-Sunbank by EatonIn Stock: 863JBXFD1A06MCSDSMR Datasheet

Current PartRFQ

FGG.1B.306.CYCD62

LEMOIn Stock: 902FGG.1B.306.CYCD62 Datasheet

SimilarRFQ

FGG.1B.306.CYCD72

LEMOIn Stock: 1185FGG.1B.306.CYCD72 Datasheet

SimilarRFQ

FGG.1B.306.CYCZ

LEMOIn Stock: 1051FGG.1B.306.CYCZ Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the JBXFD1A06MCSDSMR are identified based on the following critical parameters that determine functional equivalence:

Core Compatibility Parameters:

• Number of Positions: 6
• Connector Type: Plug, Male Pins
• Termination Method: Crimp
• Fastening Type: Push-Pull
• Shielding: Shielded
• Current Rating: 7A
• Contact Finish - Mating: Gold
• Shell Material: Brass
• Insert Material: Polyetheretherketone (PEEK)
• Material Flammability Rating: UL94 V-0

All three LEMO substitute parts (FGG.1B.306.CYCD62, FGG.1B.306.CYCD72, and FGG.1B.306.CYCZ) satisfy these core compatibility parameters. Differences exist in cable opening specifications and operating temperature ranges, which are documented in the parameter comparison table below.

Parameter Comparison

Engineering Selection Recommendations

All three LEMO substitute parts maintain active product status and full compliance with ROHS3 and REACH requirements, matching the regulatory profile of the primary JBXFD1A06MCSDSMR connector.

Selection Criteria by Application:

FGG.1B.306.CYCD62 is suitable for applications requiring cable diameters in the 5.20mm to 6.20mm range. This variant provides the narrowest cable opening specification among the three substitutes.

FGG.1B.306.CYCD72 is suitable for applications requiring cable diameters in the 6.20mm to 7.20mm range. This variant accommodates larger cable diameters and is the appropriate choice when cable specifications fall within this range.

FGG.1B.306.CYCZ is suitable when cable opening specifications are not a limiting factor or when cable diameter requirements fall outside the defined ranges of the other two variants.

All three LEMO substitutes provide extended operating temperature ranges (-55°C to 250°C) compared to the primary part (-40°C to 125°C), offering enhanced thermal performance for demanding environments. The LEMO parts feature IP50 ingress protection versus IP40 on the primary part, providing superior dust protection. Contact finish thickness on LEMO substitutes is doubled (39.4µin versus 19.7µin), potentially extending contact life in high-cycle applications.

Frequently Asked Questions (FAQ)

Q: Can FGG.1B.306.CYCD62, FGG.1B.306.CYCD72, and FGG.1B.306.CYCZ be used interchangeably with JBXFD1A06MCSDSMR?

A: These parts share identical core specifications for position count, connector type, termination method, fastening mechanism, shielding, current rating, and contact finish material. Interchangeability depends on cable opening requirements. FGG.1B.306.CYCD62 accommodates 5.20mm to 6.20mm cables, FGG.1B.306.CYCD72 accommodates 6.20mm to 7.20mm cables, and FGG.1B.306.CYCZ has unspecified cable opening. Selection must align with your cable diameter specifications.

Q: What are the key differences between the substitute parts?

A: The primary differences are cable opening specifications and operating temperature ranges. All three LEMO substitutes operate from -55°C to 250°C, exceeding the primary part's -40°C to 125°C range. LEMO substitutes provide IP50 ingress protection versus IP40 on the primary part. Contact finish thickness on LEMO parts is 39.4µin compared to 19.7µin on the primary part.

Q: Are all substitute parts RoHS and REACH compliant?

A: Yes. All three LEMO substitute parts (FGG.1B.306.CYCD62, FGG.1B.306.CYCD72, and FGG.1B.306.CYCZ) are ROHS3 compliant and REACH unaffected, matching the compliance status of the primary JBXFD1A06MCSDSMR connector.

Q: Which substitute should I select if my cable diameter is 6.5mm?

A: FGG.1B.306.CYCD72 is the appropriate selection for a 6.5mm cable diameter, as it accommodates the 6.20mm to 7.20mm range.

Q: What is the inventory status of the substitute parts?

A: FGG.1B.306.CYCD62 has 808 units in stock, FGG.1B.306.CYCD72 has 1102 units in stock, and FGG.1B.306.CYCZ has 961 units in stock.

Q: Do the substitute parts maintain the same electrical ratings?

A: Yes. All substitute parts maintain the 7A current rating of the primary part. Voltage rating is not specified for the LEMO substitutes, whereas the primary part is rated at 660V.