JBXFD1A05MSSDSR Equivalent & Substitute Parts

Part Overview

The JBXFD1A05MSSDSR is a 5-position circular connector plug manufactured by Souriau-Sunbank by Eaton. This male pin connector features solder cup termination, gold-plated mating contacts, and a shielded brass shell with chrome over nickel finish. The connector is rated for 9A at 660V and operates across the temperature range of -40°C to 125°C. The part is Active in product status and fully RoHS3 compliant. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when specific cable opening requirements necessitate alternative configurations.

Substiute Parts

JBXFD1A05MSSDSR

Souriau-Sunbank by EatonIn Stock: 783JBXFD1A05MSSDSR Datasheet

Current PartRFQ

FGG.1B.305.CLAD42

LEMOIn Stock: 968FGG.1B.305.CLAD42 Datasheet

SimilarRFQ

FGG.1B.305.CLAD52

LEMOIn Stock: 17018FGG.1B.305.CLAD52 Datasheet

SimilarRFQ

FGG.1B.305.CLAD52Z

PEI-GenesisIn Stock: 2098FGG.1B.305.CLAD52Z Datasheet

SimilarRFQ

FGG.1B.305.CLAD76

LEMOIn Stock: 823FGG.1B.305.CLAD76 Datasheet

SimilarRFQ

FGG.1B.305.CLAZ

LEMOIn Stock: 933FGG.1B.305.CLAZ Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the JBXFD1A05MSSDSR are qualified based on the following critical parameters that must align with the main part:

Mandatory Matching Parameters:

• Connector Type: Plug, Male Pins
• Number of Positions: 5
• Termination Type: Solder Cup
• Fastening Type: Push-Pull
• Shell Material: Brass
• Contact Finish - Mating: Gold
• Current Rating: 9A
• Shielding: Shielded
• Insert Material: Polyetheretherketone (PEEK)
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant

Variable Parameters (Application-Dependent):

• Cable Opening: Varies by substitute part; selection depends on cable diameter requirements
• Operating Temperature Range: Substitute parts support extended temperature ranges
• Shell Finish: Chrome (substitute) versus Chrome over Nickel (main part)
• Ingress Protection: IP50 (substitute) versus IP40 (main part)

All substitute parts are manufactured by LEMO or PEI-Genesis and maintain Active product status with full regulatory compliance.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain Active product status and full ROHS3 compliance, ensuring regulatory alignment with the primary JBXFD1A05MSSDSR connector.

FGG.1B.305.CLAD42 (LEMO): This substitute is suitable for applications requiring cable diameters in the 3.10mm to 4.20mm range. The part supports the extended operating temperature range of -55°C to 250°C and provides IP50 ingress protection. Current inventory of 890 units is available.

FGG.1B.305.CLAD52 (LEMO): This substitute accommodates cable diameters from 4.20mm to 5.20mm and is the highest-inventory substitute with 16,988 units in stock. Operating temperature range extends to -55°C to 250°C with IP50 ingress protection. This part is suitable for mid-range cable diameter applications.

FGG.1B.305.CLAD52Z (PEI-Genesis): Limited technical specification data is provided for this part. Current inventory of 2,000 units is available. Verification of specific application requirements is necessary before selection.

FGG.1B.305.CLAD76 (LEMO): This substitute is designed for larger cable diameters ranging from 7.20mm to 7.60mm. Operating temperature extends to -55°C to 250°C with IP50 ingress protection. Current inventory of 792 units is available.

FGG.1B.305.CLAZ (LEMO): This substitute features a no-collet backshell configuration and supports the extended operating temperature range of -55°C to 250°C with IP50 ingress protection. Cable opening specification is not provided. Current inventory of 848 units is available.

Selection among substitute parts should be based on specific cable diameter requirements and operating temperature conditions of the target application.

Frequently Asked Questions (FAQ)

Q: What are the primary differences between the JBXFD1A05MSSDSR and the LEMO FGG.1B.305 series substitutes?

A: The main differences are shell finish (Chrome over Nickel for the primary part versus Chrome for LEMO substitutes), ingress protection rating (IP40 versus IP50), and operating temperature range (-40°C to 125°C versus -55°C to 250°C). All parts maintain identical connector type, pin count, termination method, current rating, and shielding characteristics.

Q: How do I select the correct substitute based on cable opening requirements?

A: Cable opening specifications vary among substitute parts. FGG.1B.305.CLAD42 accommodates 3.10mm to 4.20mm cables, FGG.1B.305.CLAD52 accommodates 4.20mm to 5.20mm cables, and FGG.1B.305.CLAD76 accommodates 7.20mm to 7.60mm cables. Select the substitute whose cable opening range matches your cable diameter.

Q: Are all substitute parts RoHS3 compliant?

A: Yes, all listed substitute parts are ROHS3 compliant, matching the compliance status of the primary JBXFD1A05MSSDSR connector.

Q: What is the significance of the extended operating temperature range in the LEMO substitutes?

A: The LEMO FGG.1B.305 series substitutes support operating temperatures from -55°C to 250°C, compared to -40°C to 125°C for the primary part. This extended range provides flexibility for applications requiring operation in more extreme temperature environments.

Q: Can the FGG.1B.305.CLAZ be used as a direct replacement?

A: The FGG.1B.305.CLAZ features a no-collet backshell configuration, which differs from the standard backshell design. Cable opening specification is not provided for this part. Mechanical compatibility with existing cable assemblies must be verified before selection.

Q: What inventory levels are available for each substitute?

A: FGG.1B.305.CLAD52 has the highest inventory with 16,988 units. FGG.1B.305.CLAD42 has 890 units, FGG.1B.305.CLAD52Z has 2,000 units, FGG.1B.305.CLAD76 has 792 units, and FGG.1B.305.CLAZ has 848 units in stock.

Q: Are the contact finish thicknesses different between the primary part and substitutes?

A: Yes, the primary part has a contact finish thickness of 19.7µin (0.50µm), while the LEMO substitutes have 39.4µin (1.00µm). Both thicknesses provide gold plating for mating contact surfaces.

Q: What is the significance of the IP50 ingress protection rating on the substitutes?

A: IP50 provides dust protection, which is superior to the IP40 rating of the primary part. This enhanced protection may be beneficial in industrial and instrumentation environments with higher dust exposure.