Equivalent & Substitute Parts for Eaton J60060-1C Fuse Block

Part Overview

The Eaton J60060-1C is a Class J cartridge fuse block rated for 60 amperes at 600 volts, configured as a single-circuit chassis mount assembly. This component is classified as obsolete, making identification of compatible substitute parts essential for maintenance, repair, and system continuity in industrial electrical installations. The J60060-1C serves as a protective switching device in power distribution systems where Class J fuses are specified.

Substiute Parts

J60060-1C

Eaton - Bussmann Electrical DivisionIn Stock: 733J60060-1C Datasheet

Current PartRFQ

JM60060-1CR

Eaton - Bussmann Electrical DivisionIn Stock: 823JM60060-1CR Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the J60060-1C is determined by strict equivalence across the following critical parameters:

• Current Rating: 60 amperes
• Voltage Rating: 600 volts
• Fuse Type: Cartridge
• Fuse Size: 1.063" Dia x 2.374" L (27mm x 60.3mm)
• Number of Circuits: 1 circuit
• Mounting Configuration: Chassis mount with box lug termination
• Compatibility: For use with Class J fuses

The substitute part JM60060-1CR maintains electrical and mechanical compatibility with the original J60060-1C specification. This substitute is manufactured by the same supplier (Eaton - Bussmann Electrical Division) and carries active product status with RoHS compliance certification.

Parameter Comparison

Engineering Selection Recommendations

The JM60060-1CR is the designated substitute for the obsolete J60060-1C based on electrical and mechanical parameter equivalence. The substitute part is manufactured by the same original equipment manufacturer and carries active product status, ensuring ongoing availability and supply chain reliability. The JM60060-1CR meets RoHS compliance requirements, providing environmental and regulatory alignment for modern installations. Both parts share identical ECCN and HTSUS classifications, confirming regulatory consistency.

Frequently Asked Questions (FAQ)

Q: Can the JM60060-1CR be used as a direct replacement for the J60060-1C?

A: Yes. Both parts are rated for 60 amperes at 600 volts, accept Class J cartridge fuses of identical dimensions (1.063" Dia x 2.374" L), and are configured as single-circuit fuse blocks. Electrical and mechanical compatibility is established.

Q: What is the difference between the J60060-1C and JM60060-1CR?

A: The J60060-1C is classified as obsolete, while the JM60060-1CR carries active product status. The substitute part includes RoHS compliance certification. Both parts maintain identical current and voltage ratings, fuse type, and circuit configuration.

Q: Are there packaging differences between these parts?

A: The J60060-1C is supplied with standard packaging, while the JM60060-1CR is supplied in bulk packaging. This distinction does not affect electrical or mechanical performance.

Q: Is the JM60060-1CR suitable for new installations?

A: Yes. The active product status and RoHS compliance of the JM60060-1CR make it suitable for new installations, maintenance applications, and system upgrades where Class J 60-ampere 600-volt fuse block protection is specified.