IXTY10P15T P-Channel MOSFET Equivalent & Substitute Parts

Part Overview

The IXTY10P15T is a P-Channel MOSFET manufactured by IXYS, rated for 150V drain-to-source voltage with 10A continuous drain current at 25°C. This device is housed in a TO-252AA (DPAK) surface mount package and is part of the TrenchP™ series. The component is currently in active production status with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1).

Substitute parts are identified when equivalent electrical and mechanical parameters allow direct replacement in circuit applications. Substitution becomes necessary due to inventory availability, supply chain considerations, or design flexibility requirements while maintaining functional equivalence within specified parameter tolerances.

Substiute Parts

IXTY10P15T

IXYSIn Stock: 959IXTY10P15T Datasheet

Current PartRFQ

IRFR6215TRLPBF

Infineon TechnologiesIn Stock: 30505IRFR6215TRLPBF Datasheet

SimilarRFQ

IRFR6215TRPBF

Infineon TechnologiesIn Stock: 35337IRFR6215TRPBF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the IXTY10P15T are identified based on strict electrical and mechanical parameter equivalence. The substitution logic is based on the following critical parameters:

Electrical Equivalence Criteria:

• FET Type: P-Channel topology
• Drain to Source Voltage (Vdss): 150V minimum rating
• Mounting Type: Surface Mount TO-252AA (DPAK) package
• Gate-Source Voltage (Vgs) compatibility: ±15V or greater rating
• Operating Temperature Range: Minimum -55°C to 150°C coverage

Mechanical Equivalence Criteria:

• Package / Case: TO-252-3, DPAK (2 Leads + Tab), SC-63
• Pin configuration: Direct footprint compatibility

The identified substitute parts meet or exceed the specified electrical ratings while maintaining identical mechanical packaging. Continuous drain current (Id) and power dissipation ratings in substitute parts may exceed the original specification, which does not preclude substitution in applications where the original IXTY10P15T rating is sufficient.

Parameter Comparison

Engineering Selection Recommendations

Both IRFR6215TRPBF and IRFR6215TRLPBF are active production devices manufactured by Infineon Technologies and are suitable substitutes for the IXTY10P15T based on electrical and mechanical parameter alignment.

Compliance and Certification Status: All three devices maintain ROHS3 compliance and REACH unaffected status. Moisture sensitivity level is identical across all parts (MSL 1, Unlimited). Both substitute parts operate across an extended temperature range (-55°C to 175°C) compared to the original part (-55°C to 150°C), providing additional thermal margin in high-temperature applications.

Electrical Performance Considerations: The IRFR6215 series devices provide higher continuous drain current (13A versus 10A) and greater power dissipation capability (110W versus 83W). On-resistance (Rds On) is lower in the substitute parts (295 mOhm versus 350 mOhm), resulting in reduced conduction losses. Gate charge is higher in the substitute parts (66 nC versus 36 nC), which may affect switching speed in gate-drive-limited applications.

Packaging and Mechanical Compatibility: Both substitute parts use identical TO-252AA (DPAK) packaging with SC-63 case designation, ensuring direct footprint compatibility without PCB layout modifications.

Frequently Asked Questions (FAQ)

Q: Can IRFR6215TRPBF or IRFR6215TRLPBF be used as direct replacements for IXTY10P15T in existing designs?

A: Yes. Both substitute parts share identical drain-to-source voltage rating (150V), package type (TO-252AA DPAK), and mounting configuration. Pin-to-pin compatibility is maintained. The higher current and power ratings of the substitute parts do not prevent substitution in applications designed for the IXTY10P15T.

Q: What is the difference between IRFR6215TRPBF and IRFR6215TRLPBF?

A: Both parts are electrically identical with matching electrical specifications. The difference lies in packaging format: IRFR6215TRPBF is supplied in Cut Tape (CT) & Digi-Reel® format, while IRFR6215TRLPBF is also supplied in Cut Tape (CT) & Digi-Reel® format. Both are suitable for automated assembly processes.

Q: Are there any thermal considerations when substituting these parts?

A: The substitute parts (IRFR6215 series) have a higher maximum operating temperature (175°C junction temperature versus 150°C for IXTY10P15T) and greater power dissipation capability (110W versus 83W). These characteristics provide additional thermal headroom in applications operating near temperature limits.

Q: How do gate charge differences affect circuit performance?

A: The substitute parts have higher gate charge (66 nC versus 36 nC at 10V). In gate-drive-limited applications, this may result in slightly slower switching transitions. Gate driver circuits must supply sufficient current to charge the gate within the required switching time window. Verify gate driver capability for the specific application.

Q: Is PCB layout modification required when substituting these parts?

A: No. All three devices use identical TO-252-3 DPAK packaging with the same pin configuration and footprint. Direct component substitution on existing PCBs is possible without layout changes.

Q: Do all three parts meet the same compliance standards?

A: Yes. IXTY10P15T, IRFR6215TRPBF, and IRFR6215TRLPBF are all ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. All parts are classified under ECCN EAR99 and HTSUS 8541.29.0095.