IXTA10N60P Equivalent & Substitute Parts

Part Overview

The IXTA10N60P is an N-Channel 600V 10A MOSFET manufactured by IXYS in the Polar series. This device is rated for 200W continuous power dissipation and is housed in a TO-263AA surface mount package. The part is currently Active in product status and RoHS3 compliant.

Substitute parts are identified when equivalent electrical performance can be achieved within the specified parameter ranges while maintaining compatibility with the TO-263 package family. Alternative devices may be required due to inventory availability, manufacturing discontinuation of related product lines, or design optimization for specific thermal or gate charge requirements.

Key Parameters

Parameter	Value	Unit
Drain to Source Voltage (Vdss)	600	V
Continuous Drain Current (Id) @ 25°C	10	A
Power Dissipation (Max)	200	W
Rds On (Max) @ 5A, 10V	740	mOhm
Gate Charge (Qg) @ 10V	32	nC
Operating Temperature Range	-55 to 150	°C
Package Type	TO-263-3 (D2PAK)	-
Mounting Type	Surface Mount	-

Substitute Part Grouping Explanation

Substitution eligibility for the IXTA10N60P is determined by the following critical parameters:

Voltage Rating: All substitute parts must maintain a Drain to Source Voltage (Vdss) of 600V to ensure safe operation in the same circuit topology.

Current Rating: Substitute parts with continuous drain current ratings of 10A or greater at 25°C are considered direct substitutes. Parts with lower current ratings (7A, 5A, 5.5A) are partial substitutes suitable only for applications with reduced current requirements.

Package Compatibility: The TO-263 package family (TO-263-3, D2PAK with 2 leads plus tab) ensures mechanical and thermal compatibility. Parts in DPAK (TO-252) packages represent a different thermal footprint and are listed for reference only.

Operating Temperature: Parts rated for the full -55°C to 150°C range are preferred. Parts with upper temperature limits of 150°C only are acceptable for applications not requiring low-temperature operation.

RoHS and Compliance Status: All listed substitutes maintain RoHS3 compliance and REACH unaffected status, matching the original part's regulatory requirements.

Parameter Comparison

Parameter	IXTA10N60P	R6007ENJTL	R6007KNJTL	STB10NK60ZT4	STB13NK60ZT4	STD7ANM60N	STD9N60M2
Manufacturer	IXYS	Rohm Semiconductor	Rohm Semiconductor	STMicroelectronics	STMicroelectronics	STMicroelectronics	STMicroelectronics
Vdss (V)	600	600	600	600	600	600	600
Id @ 25°C (A)	10	7	7	10	13	5	5.5
Power Dissipation (W)	200	40	78	115	150	45	60
Rds On (mOhm)	740 @ 5A	620 @ 2.4A	620 @ 2.4A	750 @ 4.5A	550 @ 4.5A	900 @ 2.5A	780 @ 3A
Gate Charge (nC)	32 @ 10V	20 @ 10V	14.5 @ 10V	70 @ 10V	92 @ 10V	14 @ 10V	10 @ 10V
Operating Temp (°C)	-55 to 150	150	-55 to 150	-55 to 150	-55 to 150	150	150
Package	TO-263AA	LPTS	LPTS	D2PAK	D2PAK	DPAK	DPAK
Product Status	Active	Active	Active	Not For New Designs	Active	Active	Active

Engineering Selection Recommendations

Direct Substitutes (10A Rating, 600V, TO-263 Package Family):

STB13NK60ZT4 (STMicroelectronics) provides the closest electrical match with 13A continuous drain current and 150W power dissipation. This part is Active in product status and rated for the full -55°C to 150°C operating range. The lower on-resistance (550mOhm) offers improved thermal performance compared to the IXTA10N60P.

STB10NK60ZT4 (STMicroelectronics) matches the 10A current rating exactly and maintains 600V voltage rating. However, this part is marked "Not For New Designs" and should be used only in legacy system maintenance or when inventory constraints require it.

R6007KNJTL (Rohm Semiconductor) operates at 7A continuous current with 78W power dissipation and is rated for the full -55°C to 150°C temperature range. This part is suitable for applications where the 10A rating of the original part exceeds actual current requirements.

Partial Substitutes (Lower Current Ratings, 600V):

R6007ENJTL (Rohm Semiconductor) provides 7A continuous current with 40W power dissipation. Operating temperature is limited to 150°C maximum. This part is suitable only for reduced-current applications.

STD7ANM60N (STMicroelectronics) and STD9N60M2 (STMicroelectronics) are rated for 5A and 5.5A respectively in DPAK packages. These parts have different thermal characteristics due to package geometry and should be used only when DPAK footprint compatibility is confirmed in the design.

Compliance and Regulatory Considerations:

All listed substitute parts maintain RoHS3 compliance and REACH unaffected status. STD7ANM60N carries AEC-Q101 automotive qualification, which may be required for automotive applications.

Frequently Asked Questions (FAQ)

Q: Can R6007ENJTL or R6007KNJTL replace IXTA10N60P in all applications?

A: R6007KNJTL is suitable for applications where continuous drain current does not exceed 7A. R6007ENJTL has the same current limitation and additionally lacks the full -55°C to 150°C temperature range. Both parts are electrically compatible at 600V but have reduced power handling capacity.

Q: What is the difference between STB10NK60ZT4 and STB13NK60ZT4?

A: STB13NK60ZT4 provides 13A continuous current versus 10A for STB10NK60ZT4, with correspondingly higher power dissipation (150W vs. 115W). STB10NK60ZT4 is marked "Not For New Designs," making STB13NK60ZT4 the preferred STMicroelectronics option for new applications.

Q: Are DPAK packages (STD7ANM60N, STD9N60M2) compatible with TO-263 footprints?

A: No. DPAK (TO-252) and TO-263 packages have different pin configurations and thermal characteristics. These parts require PCB layout redesign and are listed for reference only when package conversion is acceptable.

Q: Which substitute part has the lowest gate charge?

A: STD9N60M2 has the lowest gate charge at 10nC, followed by STD7ANM60N at 14nC. Lower gate charge reduces driver power requirements and switching losses.

Q: Can I use STB10NK60ZT4 in new designs?

A: STB10NK60ZT4 is marked "Not For New Designs." For new applications, use STB13NK60ZT4 or R6007KNJTL instead.

Q: What is the thermal advantage of STB13NK60ZT4 over IXTA10N60P?

A: STB13NK60ZT4 has lower on-resistance (550mOhm vs. 740mOhm), resulting in reduced conduction losses and lower junction temperature at equivalent current levels.

Q: Are all substitute parts rated for -55°C operation?

A: No. R6007ENJTL, STD7ANM60N, and STD9N60M2 are rated for 150°C maximum only, without the -55°C lower limit. Verify temperature requirements before substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message