IXR3W02BRXCD Equivalent & Substitute Parts

Part Overview

The IXR3W02BRXCD is an IP67 sealed pushbutton switch manufactured by APEM Inc., featuring SPST-NO circuit configuration with blue LED illumination. This component is designed for panel-mount applications requiring dust-tight and water-resistant operation. The part is currently listed as obsolete, making identification of equivalent substitute components essential for ongoing system support and procurement planning.

Substiute Parts

IXR3W02BRXCD

APEM Inc.In Stock: 794IXR3W02BRXCD Datasheet

Current PartRFQ

IXP3W02BRXCD

APEM Inc.In Stock: 1365IXP3W02BRXCD Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IXR3W02BRXCD is determined by strict equivalence across the following critical parameters:

• Circuit configuration (SPST-NO)
• Switch function (Off-Mom momentary operation)
• Current and voltage ratings (100mA DC, 28V DC)
• Illumination specifications (LED, Blue, 3.2VDC)
• Ingress protection rating (IP67/IP69K)
• Panel cutout dimensions (11.90mm circular)
• Operating temperature range (-40°C to 85°C)
• Mechanical and electrical life (1,000,000 cycles each)
• Termination method (Wire Leads)
• Regulatory compliance (ROHS3, REACH Unaffected)

The IXP3W02BRXCD qualifies as a direct substitute based on identical alignment across all these parameters.

Parameter Comparison

Engineering Selection Recommendations

The IXP3W02BRXCD is the direct substitute for the obsolete IXR3W02BRXCD. Both components are manufactured by APEM Inc. within the IX series and maintain identical electrical, mechanical, and environmental specifications. The primary distinction is product status: IXR3W02BRXCD is obsolete while IXP3W02BRXCD is active and currently in production.

Selection of IXP3W02BRXCD is supported by:

• Identical circuit topology and switching characteristics
• Matching electrical ratings and performance parameters
• Equivalent environmental protection (IP67/IP69K)
• Identical mechanical interface and panel cutout dimensions
• Full regulatory compliance alignment (ROHS3, REACH Unaffected)
• Active production status ensuring long-term availability

Frequently Asked Questions (FAQ)

Q: Can IXP3W02BRXCD directly replace IXR3W02BRXCD in existing designs?

A: Yes. Both components share identical electrical specifications, mechanical dimensions, and environmental ratings. No circuit modifications or panel rework are required.

Q: What is the primary reason for substitution?

A: IXR3W02BRXCD is obsolete. IXP3W02BRXCD is the active equivalent from the same manufacturer and series, ensuring continued component availability.

Q: Are there packaging differences between these parts?

A: IXR3W02BRXCD is supplied with standard packaging, while IXP3W02BRXCD is supplied in bulk packaging. Both use identical wire lead termination and are suitable for the same applications.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both components are ROHS3 compliant and REACH unaffected, meeting identical environmental and regulatory standards.

Q: What are the critical parameters for substitution compatibility?

A: Circuit configuration (SPST-NO), current rating (100mA DC), voltage rating (28V DC), illumination specifications (LED blue at 3.2VDC), ingress protection (IP67/IP69K), and panel cutout diameter (11.90mm) must remain constant for functional equivalence.