IXGP7N60CD1 Equivalent & Substitute Parts

Part Overview

The IXGP7N60CD1 is an IGBT (Insulated Gate Bipolar Transistor) rated for 600V collector-emitter breakdown voltage with 14A maximum collector current and 75W power dissipation in a through-hole TO-220-3 package. This device is part of the HiPerFAST™ and Lightspeed™ series from IXYS and is classified as obsolete. Due to its obsolete status, equivalent and substitute parts from active manufacturers are necessary for new designs and ongoing production requirements.

Substiute Parts

IXGP7N60CD1

IXYSIn Stock: 834IXGP7N60CD1 Datasheet

Current PartRFQ

IXYP8N90C3D1

IXYSIn Stock: 758IXYP8N90C3D1 Datasheet

DirectRFQ

IKA15N60TXKSA1

Infineon TechnologiesIn Stock: 800IKA15N60TXKSA1 Datasheet

SimilarRFQ

STGF7H60DF

STMicroelectronicsIn Stock: 1288STGF7H60DF Datasheet

SimilarRFQ

STGP7H60DF

STMicroelectronicsIn Stock: 951STGP7H60DF Datasheet

SimilarRFQ

STGP7NC60HD

STMicroelectronicsIn Stock: 1925STGP7NC60HD Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the IXGP7N60CD1 are selected based on the following critical parameters that determine functional compatibility:

Primary Matching Criteria:

• Voltage - Collector Emitter Breakdown: 600V (exact match required for voltage class compatibility)
• Current - Collector (Ic) (Max): 14A minimum (equal or greater acceptable)
• Package / Case: TO-220-3 (mechanical and thermal interface requirement)
• Mounting Type: Through Hole (PCB assembly compatibility)
• Input Type: Standard (gate drive compatibility)

Secondary Consideration Parameters:

• Power - Max: 75W or greater (thermal capability)
• Operating Temperature Range: Must encompass application requirements
• Vce(on) (Max): Lower values indicate improved efficiency
• Gate Charge: Lower values indicate faster switching capability
• Switching Energy and Reverse Recovery Time: Affect circuit performance and EMI characteristics

The substitute parts listed below meet or exceed the primary matching criteria, ensuring direct functional replacement capability in applications designed for the IXGP7N60CD1.

Parameter Comparison

Engineering Selection Recommendations

Direct Voltage Class Substitutes (600V Rating):

The following parts maintain the 600V voltage class and are suitable for direct replacement in applications where the IXGP7N60CD1 was originally specified:

STGP7H60DF (STMicroelectronics) - Recommended for applications requiring maximum power dissipation capability. This part matches the 14A current rating and provides 88W power rating with improved thermal performance. Active product status with ROHS3 compliance ensures long-term availability and regulatory compliance.

STGP7NC60HD (STMicroelectronics) - Recommended for applications with higher current requirements. This part provides 25A maximum collector current with 80W power rating, maintaining the 600V voltage class. Active product status with ROHS3 compliance and PowerMESH™ technology provides enhanced performance characteristics.

IKA15N60TXKSA1 (Infineon Technologies) - Recommended for applications requiring trench field stop technology. This part provides 14.7A current rating with TrenchStop® technology and active product status. Operating temperature range extends to 175°C, suitable for high-temperature applications. ROHS3 compliance confirmed.

STGF7H60DF (STMicroelectronics) - Suitable for applications with lower power dissipation requirements. This part maintains 14A current rating with 24W power rating and trench field stop technology. Active product status with ROHS3 compliance. Note: Power rating is lower than the original part.

Higher Voltage Class Substitute (900V Rating):

IXYP8N90C3D1 (IXYS) - Suitable for applications where higher voltage margin is required. This part provides 900V voltage rating with 20A current capability and 125W power rating. Active product status from the same manufacturer (IXYS) as the original part. This substitute is appropriate only when the application circuit can accommodate the higher voltage rating without design modification.

All substitute parts listed maintain through-hole TO-220-3 packaging, standard input type gate drive compatibility, and MSL 1 moisture sensitivity rating. Selection should be based on specific application requirements for current, power dissipation, and operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can STGP7H60DF directly replace IXGP7N60CD1 in existing PCB designs?

A: Yes. Both parts share identical TO-220-3 through-hole package specifications, 600V voltage rating, 14A current rating, and standard input type. PCB layout and thermal management design remain compatible. No circuit modifications are required.

Q: What is the primary difference between STGP7H60DF and STGF7H60DF?

A: Both parts are STMicroelectronics 600V, 14A IGBTs with trench field stop technology. The primary difference is power rating: STGP7H60DF provides 88W while STGF7H60DF provides 24W. STGP7H60DF is recommended for applications matching the original 75W specification.

Q: Is IKA15N60TXKSA1 suitable for the same applications as IXGP7N60CD1?

A: Yes, with consideration of switching characteristics. Both maintain 600V voltage class and approximately 14A current rating. IKA15N60TXKSA1 features trench field stop technology with different switching energy and gate charge characteristics. Operating temperature extends to 175°C versus 150°C for the original part.

Q: Why is IXYP8N90C3D1 listed as a substitute if it has 900V rating?

A: IXYP8N90C3D1 is listed as a substitute for applications where higher voltage margin provides design flexibility. The 900V rating is compatible with 600V-class circuits but provides additional voltage headroom. This part is appropriate only when circuit design permits the higher voltage rating.

Q: What is the impact of different gate charge values on circuit design?

A: Gate charge affects gate drive circuit requirements and switching speed. IXYP8N90C3D1 has lower gate charge (13.3nC) enabling faster switching, while IKA15N60TXKSA1 has higher gate charge (87nC) requiring more robust gate drive. The original IXGP7N60CD1 specifies 25nC. Gate drive circuit compatibility should be verified for parts with significantly different gate charge values.

Q: Are all substitute parts RoHS compliant?

A: All active substitute parts listed (STGP7H60DF, STGF7H60DF, IKA15N60TXKSA1, STGP7NC60HD) are ROHS3 compliant. The original IXGP7N60CD1 does not specify RoHS status. IXYP8N90C3D1 does not specify RoHS status in the provided data.

Q: What thermal considerations apply when selecting between these substitutes?

A: Power dissipation capability varies: STGP7H60DF (88W), STGP7NC60HD (80W), IXYP8N90C3D1 (125W), IXGP7N60CD1 (75W), IKA15N60TXKSA1 (35.7W), and STGF7H60DF (24W). Thermal management design must accommodate the selected part's power rating. All parts use identical TO-220-3 package with equivalent thermal interface characteristics.

Q: Can STGP7NC60HD be used in applications requiring exactly 14A current?

A: Yes. STGP7NC60HD provides 25A maximum collector current, which exceeds the 14A requirement. The part operates safely at lower current levels. This part is suitable for applications where future current requirements may increase or where design margin is desired.

Q: What is the significance of different reverse recovery time (trr) values?

A: Reverse recovery time affects switching losses and EMI characteristics. Lower trr values (IXGP7N60CD1: 35ns, STGP7NC60HD: 37ns, IKA15N60TXKSA1: 34ns) indicate faster switching with lower EMI. Higher trr values (STGP7H60DF: 136ns, STGF7H60DF: 136ns, IXYP8N90C3D1: 114ns) may require additional EMI filtering in sensitive applications.

Q: Is package variant TO-220FP (STGF7H60DF) compatible with TO-220-3 PCB layouts?

A: TO-220FP and TO-220-3 are mechanically compatible through-hole packages with identical pin spacing and mounting requirements. PCB layouts designed for TO-220-3 accept TO-220FP devices without modification. Thermal interface characteristics remain equivalent.