IXGP16N60C2 IGBT Equivalent & Substitute Parts

Part Overview

The IXGP16N60C2 is a 600V, 40A IGBT manufactured by IXYS in the HiPerFAST™ series, housed in a TO-220-3 through-hole package with a maximum power rating of 150W. This component is classified as obsolete, necessitating identification of functionally equivalent alternatives from active product lines. Substitute parts must maintain electrical compatibility across voltage, current, and thermal operating ranges while accommodating the through-hole TO-220-3 package format.

Key Parameters

Parameter	IXGP16N60C2	Unit
Voltage - Collector Emitter Breakdown (Max)	600	V
Current - Collector (Ic) (Max)	40	A
Current - Collector Pulsed (Icm)	100	A
Power - Max	150	W
Vce(on) (Max) @ Vge, Ic	3V @ 15V, 12A	V
Gate Charge	25	nC
Operating Temperature Range	-55 to 150	°C
Package / Case	TO-220-3	-
Mounting Type	Through Hole	-

Substitute Part Grouping Explanation

Substitution eligibility for the IXGP16N60C2 is determined by the following critical parameters:

Mandatory Matching Criteria:

Voltage - Collector Emitter Breakdown (Max): 600V minimum
Current - Collector (Ic) (Max): 40A minimum
Package / Case: TO-220-3 through-hole configuration
Mounting Type: Through Hole

Acceptable Variation Parameters:

Power - Max: Equal to or greater than 150W
Vce(on) (Max): Equal to or lower than 3V (reduced conduction loss)
Gate Charge: Variation acceptable within switching energy constraints
Operating Temperature Range: Minimum -40°C to 150°C; extended upper range acceptable

Substitute parts meeting these criteria are classified into two groups: direct voltage/current equivalents and higher-rated alternatives suitable for derating applications.

Parameter Comparison

Parameter	IXGP16N60C2	IKP20N60H3XKSA1	IKP20N60TXKSA1	IGP20N60H3XKSA1	STGP19NC60HD	STGP15H60DF	IXYP30N120C3
Manufacturer	IXYS	Infineon	Infineon	Infineon	STMicroelectronics	STMicroelectronics	IXYS
Voltage - Collector Emitter Breakdown (Max) [V]	600	600	600	600	600	600	1200
Current - Collector (Ic) (Max) [A]	40	40	40	40	40	30	75
Current - Collector Pulsed (Icm) [A]	100	80	60	80	60	60	145
Power - Max [W]	150	170	166	170	130	115	500
Vce(on) (Max) @ Vge, Ic [V]	3 @ 15V, 12A	2.4 @ 15V, 20A	2.05 @ 15V, 20A	2.4 @ 15V, 20A	2.5 @ 15V, 12A	2 @ 15V, 15A	3.3 @ 15V, 30A
Gate Charge [nC]	25	120	120	120	53	81	69
Operating Temperature Range [°C]	-55 to 150	-40 to 175	-40 to 175	-40 to 175	-55 to 150	-55 to 175	-55 to 175
Package / Case	TO-220-3	TO-220-3	TO-220-3	TO-220-3	TO-220-3	TO-220-3	TO-220-3
Product Status	Obsolete	Active	Active	Active	Active	Active	Active
RoHS Status	-	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	-

Engineering Selection Recommendations

Direct Equivalents (600V, 40A Rating):

The Infineon TrenchStop® series components IKP20N60H3XKSA1 and IKP20N60TXKSA1 provide direct electrical equivalence to the IXGP16N60C2 across voltage and current ratings. Both devices are active products with ROHS3 compliance and extended operating temperature ranges to 175°C. The IKP20N60TXKSA1 offers reduced Vce(on) at 2.05V compared to the IXGP16N60C2 at 3V, resulting in lower conduction losses. Both Infineon parts maintain the TO-220-3 package format and through-hole mounting configuration.

The Infineon IGP20N60H3XKSA1 is electrically identical to IKP20N60H3XKSA1 and serves as an alternative source within the same product family.

Alternative with Reduced Current Rating:

The STMicroelectronics STGP15H60DF operates at 30A maximum collector current, below the 40A requirement of the IXGP16N60C2. This component is suitable only for applications where the actual operating current does not exceed 30A. The STGP15H60DF provides improved Vce(on) at 2V and is an active product with ROHS3 compliance.

Higher-Rated Alternative:

The STMicroelectronics STGP19NC60HD matches the 40A rating with improved power dissipation characteristics (130W vs. 150W) and reduced gate charge (53nC vs. 25nC). This component is active and ROHS3 compliant with operating temperature range matching the original part (-55°C to 150°C).

Over-Rated Alternative:

The IXYS IXYP30N120C3 operates at 1200V and 75A, providing significant derating margin for 600V, 40A applications. This component is active and suitable for designs requiring higher voltage or current headroom. The elevated voltage rating introduces no functional incompatibility in 600V circuits.

Frequently Asked Questions (FAQ)

Q: Can the IXGP16N60C2 be directly replaced with IKP20N60H3XKSA1?

A: Yes. Both devices share identical voltage (600V) and current (40A) ratings, operate in the TO-220-3 package, and support through-hole mounting. The IKP20N60H3XKSA1 is an active product with ROHS3 compliance and extended temperature range to 175°C.

Q: What is the difference between IKP20N60H3XKSA1 and IKP20N60TXKSA1?

A: Both are Infineon TrenchStop® 600V, 40A IGBTs in TO-220-3 packages. The IKP20N60TXKSA1 exhibits lower Vce(on) (2.05V vs. 2.4V) and reduced reverse recovery time (41ns vs. 112ns), resulting in improved switching performance and reduced conduction losses. Selection depends on application-specific switching frequency and thermal constraints.

Q: Is STGP15H60DF a suitable replacement?

A: The STGP15H60DF is suitable only for applications where the actual collector current does not exceed 30A. The component is rated at 30A maximum, below the IXGP16N60C2 specification of 40A. Exceeding this rating violates device specifications.

Q: Why is IXYP30N120C3 listed as a substitute despite its 1200V rating?

A: The IXYP30N120C3 meets the mandatory substitution criteria: it operates at 600V or higher (1200V is acceptable), carries 40A or higher (75A exceeds requirement), and uses the TO-220-3 through-hole package. Higher voltage ratings do not create incompatibility in lower-voltage circuits. This component provides additional derating margin for applications requiring enhanced reliability.

Q: Are all substitute parts ROHS3 compliant?

A: All active substitute parts listed (Infineon and STMicroelectronics components) are ROHS3 compliant. The IXYS IXYP30N120C3 does not specify RoHS status in the provided data.

Q: What is the impact of higher gate charge on circuit design?

A: The IXGP16N60C2 specifies 25nC gate charge, while Infineon TrenchStop® parts specify 120nC. Higher gate charge requires increased gate drive current or extended switching times. Circuit gate drive capability must be verified before substitution. STMicroelectronics alternatives (STGP19NC60HD at 53nC, STGP15H60DF at 81nC) present intermediate gate charge values.

Q: Can the IXGP16N60C2 be used in new designs?

A: No. The IXGP16N60C2 is classified as obsolete. New designs must utilize active products from the substitute list to ensure long-term supply availability and compliance with current manufacturing standards.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message