IXGP10N60A IGBT Equivalent & Substitute Parts

Part Overview

The IXGP10N60A is a 600V, 20A IGBT manufactured by IXYS in a Through Hole TO-220-3 package. This component is classified as obsolete, necessitating identification of equivalent and substitute parts for ongoing design requirements and production continuity. The part delivers 100W maximum power dissipation with a Vce(on) specification of 3V at 15V gate voltage and 10A collector current. Substitution is required for applications where the original part is no longer available through standard distribution channels.

Key Parameters

Parameter	IXGP10N60A
Voltage - Collector Emitter Breakdown (Max)	600 V
Current - Collector (Ic) (Max)	20 A
Vce(on) (Max) @ Vge, Ic	3V @ 15V, 10A
Power - Max	100 W
Input Type	Standard
Mounting Type	Through Hole
Package / Case	TO-220-3
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitute parts for the IXGP10N60A are identified based on strict electrical and mechanical compatibility criteria. The primary substitution logic is as follows:

Direct Electrical Parameter Matching:

Voltage rating must equal or exceed 600V collector-emitter breakdown voltage
Collector current rating must equal or exceed 20A maximum
Package type must be TO-220-3 Through Hole configuration
Input type must be Standard gate drive

Substitution Categories:

Category 1: Direct Voltage and Current Match (STGP10H60DF) The STMicroelectronics STGP10H60DF maintains identical voltage (600V) and current (20A) ratings with the same TO-220-3 package. This part is a direct pin-compatible substitute with improved performance characteristics and active product status.

Category 2: Elevated Voltage and Current Capability (IXGP20N120A3) The IXYS IXGP20N120A3 provides higher voltage (1200V) and current (40A) ratings in the same TO-220-3 package. This part is suitable for applications where the original design can accommodate higher voltage and current specifications without circuit modification.

Parameter Comparison

Parameter	IXGP10N60A	STGP10H60DF	IXGP20N120A3
Manufacturer	IXYS	STMicroelectronics	IXYS
Voltage - Collector Emitter Breakdown (Max)	600 V	600 V	1200 V
Current - Collector (Ic) (Max)	20 A	20 A	40 A
Vce(on) (Max) @ Vge, Ic	3V @ 15V, 10A	1.95V @ 15V, 10A	2.5V @ 15V, 20A
Power - Max	100 W	115 W	180 W
Input Type	Standard	Standard	Standard
Mounting Type	Through Hole	Through Hole	Through Hole
Package / Case	TO-220-3	TO-220-3	TO-220-3
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Obsolete	Active	Active
RoHS Status	Not Specified	ROHS3 Compliant	Not Specified
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected

Engineering Selection Recommendations

STGP10H60DF Selection Criteria: The STMicroelectronics STGP10H60DF is the preferred direct substitute for the IXGP10N60A. This part maintains identical voltage and current specifications with TO-220-3 package compatibility. The STGP10H60DF carries Active product status and ROHS3 compliance, ensuring long-term availability and regulatory alignment. The lower Vce(on) specification (1.95V versus 3V) provides improved thermal performance in equivalent applications. Pin-for-pin compatibility is maintained without circuit redesign.

IXGP20N120A3 Selection Criteria: The IXYS IXGP20N120A3 is suitable for applications where circuit design permits higher voltage and current ratings. This part is appropriate for designs with voltage headroom and current margin requirements exceeding the original specification. The IXGP20N120A3 maintains TO-220-3 package compatibility and Active product status. Selection of this part requires confirmation that the application circuit can operate at 1200V without component stress or performance degradation.

Compliance and Availability: Both substitute parts maintain REACH Unaffected status consistent with the original part. The STGP10H60DF provides ROHS3 compliance certification. Both parts are available in active production with confirmed inventory levels exceeding 1600 units.

Frequently Asked Questions (FAQ)

Q: Can the STGP10H60DF directly replace the IXGP10N60A without circuit modification?

A: Yes. The STGP10H60DF is pin-compatible in the TO-220-3 package with identical voltage (600V) and current (20A) ratings. No circuit redesign is required for direct substitution.

Q: What is the primary advantage of the STGP10H60DF over the original IXGP10N60A?

A: The STGP10H60DF features lower Vce(on) (1.95V versus 3V at 10A), resulting in reduced power dissipation and improved thermal efficiency. The part carries Active product status with ROHS3 compliance and confirmed long-term availability.

Q: When should the IXGP20N120A3 be selected instead of the STGP10H60DF?

A: The IXGP20N120A3 is selected when the application circuit design permits higher voltage (1200V) and current (40A) operation. This part is appropriate for designs with voltage margin requirements or applications requiring higher current capacity than the original 20A specification.

Q: Are there pin compatibility concerns when substituting either part?

A: Both substitute parts maintain TO-220-3 package configuration with standard gate, collector, and emitter pin assignments. Pin compatibility is maintained for direct socket replacement.

Q: What is the moisture sensitivity level for the substitute parts?

A: Both the STGP10H60DF and IXGP20N120A3 carry MSL 1 (Unlimited) classification, matching the original IXGP10N60A specification. No special moisture handling procedures are required.

Q: Do the substitute parts meet REACH compliance requirements?

A: Yes. Both substitute parts carry REACH Unaffected status. The STGP10H60DF additionally provides ROHS3 compliance certification.

Q: What is the operating temperature range for the substitute parts?

A: The STGP10H60DF operates from -55°C to 175°C junction temperature. The IXGP20N120A3 operates from -55°C to 150°C junction temperature. Both ranges exceed typical industrial application requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message