IXGA30N60C3 IGBT Equivalent & Substitute Parts

Part Overview

The IXGA30N60C3 is a 600V, 60A power transistor (PT) IGBT manufactured by IXYS in the GenX3™ series. This component is rated for 220W maximum power dissipation and is packaged in a Surface Mount TO-263 (D2PAK) configuration with two leads and a tab. The device is classified as obsolete, making identification of active equivalent parts essential for ongoing production and design continuity. Substitute parts must maintain electrical and mechanical compatibility across voltage, current, power, and thermal specifications while meeting current manufacturing and compliance standards.

Substiute Parts

IXGA30N60C3

IXYSIn Stock: 1546IXGA30N60C3 Datasheet

Current PartRFQ

IXGA30N60C3C1

IXYSIn Stock: 788IXGA30N60C3C1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IXGA30N60C3 is determined by strict equivalence across the following critical parameters:

Electrical Specifications:

• Voltage rating: 600V collector-emitter breakdown voltage
• Current capacity: 60A continuous collector current with 150A pulsed capability
• Power dissipation: 220W maximum
• Gate charge: 38 nC
• On-state voltage: 3V at specified test conditions

Mechanical & Packaging Requirements:

• Package type: TO-263-3 (D2PAK) with two leads and tab
• Mounting configuration: Surface Mount
• IGBT classification: PT (Power Transistor) type

Thermal Characteristics:

• Operating temperature range: -55°C to 150°C junction temperature

The IXGA30N60C3C1 qualifies as a parametric equivalent substitute. This part maintains identical electrical ratings and mechanical packaging while offering active product status and improved switching energy characteristics. Additional cross-reference parts (IGB30N60TATMA1, IGB30N60H3ATMA1) are listed as secondary substitutes within the IXYS ecosystem.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: IXGA30N60C3C1

The IXGA30N60C3C1 is the recommended substitute for the obsolete IXGA30N60C3. This part maintains complete electrical and mechanical compatibility across all critical parameters. The IXGA30N60C3C1 carries active product status, ensuring long-term availability and supply chain continuity. Both parts are ROHS3 compliant and carry identical moisture sensitivity ratings (MSL 1 - Unlimited), confirming equivalent handling and storage requirements.

The IXGA30N60C3C1 demonstrates improved switching energy performance in the on-state condition (120µJ versus 270µJ), while maintaining identical off-state switching energy (90µJ). This improvement does not alter functional compatibility but provides enhanced efficiency characteristics in switching applications.

Secondary Cross-Reference Parts:

The part numbers IGB30N60TATMA1 and IGB30N60H3ATMA1 are listed as additional cross-references within the IXYS product portfolio. These parts maintain the same electrical ratings and packaging configuration. Verification of specific application requirements and thermal management conditions is necessary when considering these alternatives, as detailed parametric data for these variants was not provided in the reference documentation.

Compliance & Certification:

Both the main part and primary substitute meet ROHS3 compliance requirements and carry EAR99 export classification. The IXGA30N60C3C1 includes REACH Unaffected status, confirming regulatory alignment with current environmental and chemical substance restrictions.

Frequently Asked Questions (FAQ)

Q: Can the IXGA30N60C3C1 be used as a direct replacement for the IXGA30N60C3?

A: Yes. The IXGA30N60C3C1 maintains identical electrical specifications (600V, 60A, 220W), gate charge (38 nC), on-state voltage characteristics, and operating temperature range (-55°C to 150°C). Both parts use the same TO-263 (D2PAK) Surface Mount package. No circuit modifications are required for substitution.

Q: What is the difference in switching energy between these parts?

A: The IXGA30N60C3C1 exhibits lower on-state switching energy (120µJ) compared to the IXGA30N60C3 (270µJ). Off-state switching energy remains identical at 90µJ for both parts. This difference reflects manufacturing improvements in the GenX3™ series and does not affect functional compatibility.

Q: Are there any thermal management differences between the main part and substitute?

A: Both parts operate across the identical temperature range (-55°C to 150°C junction temperature) and dissipate the same maximum power (220W). Thermal management design and heat sink requirements remain unchanged when substituting the IXGA30N60C3C1 for the IXGA30N60C3.

Q: What is the significance of the product status change from Obsolete to Active?

A: The IXGA30N60C3C1 carries active product status, indicating current manufacturing and long-term availability. The original IXGA30N60C3 is obsolete and subject to supply discontinuation. Substitution to the active part ensures design continuity and eliminates supply chain risk.

Q: Are packaging and mounting requirements identical?

A: Yes. Both the IXGA30N60C3 and IXGA30N60C3C1 use the TO-263-3 (D2PAK) package with two leads and a tab. Both are Surface Mount devices. PCB layout, footprint, and soldering procedures remain unchanged.

Q: Do these parts have the same moisture sensitivity requirements?

A: Yes. Both parts carry Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating no moisture sensitivity restrictions. Handling, storage, and reflow procedures are identical for both components.

Q: What compliance certifications apply to the substitute part?

A: The IXGA30N60C3C1 is ROHS3 compliant and REACH Unaffected. It carries EAR99 export classification. These certifications match the regulatory requirements of the original IXGA30N60C3.