IXFH220N06T3 Equivalent & Substitute Parts

Part Overview

The IXFH220N06T3 is an N-Channel MOSFET manufactured by IXYS, rated for 60V drain-to-source voltage with 220A continuous drain current at 25°C. This device is packaged in TO-247 through-hole configuration and is part of the HiperFET™ and TrenchT3™ series. The component is designated as Last Time Buy, indicating discontinued production status. Identification of equivalent and substitute parts is necessary to ensure design continuity and procurement availability for applications requiring comparable electrical and mechanical characteristics.

Substiute Parts

IXFH220N06T3

IXYSIn Stock: 734IXFH220N06T3 Datasheet

Current PartRFQ

IRFP2907PBF

Infineon TechnologiesIn Stock: 3291IRFP2907PBF Datasheet

SimilarRFQ

IRFP3306PBF

Infineon TechnologiesIn Stock: 4403IRFP3306PBF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IXFH220N06T3 is determined by alignment of the following critical electrical and mechanical parameters:

Primary Substitution Criteria:

• Drain-to-Source Voltage (Vdss): 60V or higher
• Continuous Drain Current (Id): 120A or higher
• On-State Resistance (Rds On): Comparable or lower at specified gate voltage
• Gate Threshold Voltage (Vgs(th)): 4V or lower
• Mounting Type: Through Hole
• Package Type: TO-247 or TO-247AC configuration

Secondary Alignment Parameters:

• Operating Temperature Range: -55°C to 175°C or equivalent
• Gate Charge (Qg): Electrical characteristic for switching performance
• Power Dissipation capability: Thermal performance consideration

The substitute parts listed below meet the primary substitution criteria and maintain compatibility with the original design specifications.

Parameter Comparison

Engineering Selection Recommendations

IRFP2907PBF Selection Basis: The IRFP2907PBF is manufactured by Infineon Technologies and maintains Active product status. This device provides a Vdss rating of 75V, exceeding the original 60V specification, with continuous drain current of 209A, closely matching the IXFH220N06T3 rating of 220A. The on-state resistance of 4.5 mOhm at 125A, 10V is comparable to the original specification. Both devices share identical operating temperature range (-55°C to 175°C), gate threshold voltage (4V @ 250µA), and maximum gate voltage (±20V). The IRFP2907PBF is ROHS3 compliant and REACH unaffected, meeting regulatory requirements equivalent to the original part.

IRFP3306PBF Selection Basis: The IRFP3306PBF is manufactured by Infineon Technologies with Active product status. This device matches the original 60V Vdss rating exactly. However, the continuous drain current is rated at 120A, representing a 45% reduction from the IXFH220N06T3 specification of 220A. The on-state resistance of 4.2 mOhm at 75A, 10V is favorable, and the gate charge of 120 nC is lower than the original 136 nC. This part is suitable for applications where the 120A current rating is sufficient. Both devices share identical operating temperature range, gate threshold voltage, and maximum gate voltage. The IRFP3306PBF is ROHS3 compliant and REACH unaffected.

Compliance and Regulatory Alignment: All substitute parts maintain ROHS3 compliance and REACH unaffected status, consistent with the original IXFH220N06T3. Moisture sensitivity level (MSL 1 - Unlimited) and ECCN/HTSUS classifications are equivalent across all listed parts.

Frequently Asked Questions (FAQ)

Q: Can the IRFP2907PBF directly replace the IXFH220N06T3 in all applications?

A: The IRFP2907PBF meets the primary substitution criteria with comparable continuous drain current (209A vs. 220A), matching gate threshold voltage, and superior voltage rating (75V vs. 60V). Both devices are packaged in TO-247-3 through-hole configuration. Direct replacement is supported for applications operating within the specified electrical parameters. Verification of thermal management and PCB layout compatibility is required due to differences in gate charge (620 nC vs. 136 nC) and input capacitance (13000 pF vs. 8500 pF).

Q: Is the IRFP3306PBF suitable as a substitute for high-current applications?

A: The IRFP3306PBF is rated for 120A continuous drain current, which is 45% lower than the IXFH220N06T3 specification of 220A. This part is suitable only for applications where the design current requirement does not exceed 120A. The on-state resistance of 4.2 mOhm is favorable, but the reduced current rating limits its applicability to lower-power designs.

Q: What are the package compatibility considerations?

A: All listed parts utilize TO-247-3 through-hole packaging. The IXFH220N06T3 uses TO-247 configuration, while the IRFP2907PBF and IRFP3306PBF use TO-247AC configuration. Both TO-247 and TO-247AC variants maintain identical pin assignments and mechanical footprints, ensuring direct PCB compatibility without layout modifications.

Q: How do gate charge differences affect circuit performance?

A: The IXFH220N06T3 has a gate charge of 136 nC at 10V, while the IRFP2907PBF has 620 nC and the IRFP3306PBF has 120 nC. Higher gate charge requires increased driver current and switching time. The IRFP2907PBF's higher gate charge may necessitate driver circuit evaluation to ensure adequate gate current supply. The IRFP3306PBF's lower gate charge provides faster switching characteristics.

Q: Are all substitute parts RoHS and REACH compliant?

A: Yes. The IXFH220N06T3, IRFP2907PBF, and IRFP3306PBF are all ROHS3 compliant and REACH unaffected. Moisture sensitivity level is MSL 1 (Unlimited) for all parts, indicating no moisture sensitivity restrictions during storage and handling.

Q: What is the significance of the IXFH220N06T3 Last Time Buy status?

A: Last Time Buy designation indicates that the IXFH220N06T3 is no longer in active production. Existing inventory is limited to 718 pieces. For new designs or long-term production requirements, selection of an active substitute part (IRFP2907PBF or IRFP3306PBF) is necessary to ensure continued component availability and supply chain stability.