IXDN502PI Low-Side Gate Driver IC Equivalent & Substitute Parts

Part Overview

The IXDN502PI is a low-side gate driver IC manufactured by IXYS, designed for driving IGBT and MOSFET gates in power management applications. This 8-DIP through-hole component operates across a supply voltage range of 4.5V to 30V with dual independent channels and non-inverting input configuration. The part is currently classified as obsolete, making identification of functionally equivalent substitutes essential for ongoing system support and new design implementations.

Substiute Parts

IXDN502PI

IXYSIn Stock: 1281IXDN502PI Datasheet

Current PartRFQ

IR4427PBF

International RectifierIn Stock: 3317IR4427PBF Datasheet

SimilarRFQ

IXDN602PI

IXYS Integrated Circuits DivisionIn Stock: 30120IXDN602PI Datasheet

SimilarRFQ

TC1427CPA

Microchip TechnologyIn Stock: 1636TC1427CPA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IXDN502PI is determined by the following critical parameters:

Primary Compatibility Criteria:

• Driven configuration: Low-side operation
• Channel type: Independent channels
• Number of drivers: 2 channels
• Input type: Non-inverting
• Package type: 8-DIP through-hole form factor
• Gate type compatibility: IGBT and/or MOSFET support

Secondary Compatibility Criteria:

• Supply voltage range must encompass or overlap with 4.5V minimum
• Logic voltage thresholds (VIL, VIH) must be compatible with 0.8V and 3V levels
• Peak output current capability (source and sink) must meet or exceed 2A minimum
• Operating temperature range must support the application requirements
• Rise and fall time specifications must be acceptable for the switching frequency

All three substitute parts meet the primary compatibility criteria. Secondary parameter variations are documented in the comparison table to enable application-specific selection.

Parameter Comparison

Engineering Selection Recommendations

IXDN602PI is the primary substitute for IXDN502PI. Both parts are manufactured by IXYS with identical functional specifications, including supply voltage range (4.5V ~ 35V for IXDN602PI provides extended upper limit), logic voltage levels, peak output current, and switching characteristics. The IXDN602PI is currently in active production status with significantly higher inventory availability (30,050 units). RoHS3 compliance certification is provided. This part represents a direct functional replacement with enhanced supply voltage capability.

IR4427PBF is a secondary substitute suitable for applications where the supply voltage range of 6V ~ 20V is acceptable. This International Rectifier part provides superior peak output current capability (2.3A source, 3.3A sink) compared to the IXDN502PI specification. The logic voltage threshold VIH of 2.7V is marginally lower than the IXDN502PI specification of 3V. Slower switching characteristics (15ns rise, 10ns fall) may impact high-frequency applications. Product status is active with good inventory availability (3,247 units).

TC1427CPA is a tertiary substitute applicable only to applications with relaxed temperature and switching speed requirements. The Microchip Technology part operates within a narrower temperature range (0°C ~ 70°C) and narrower supply voltage range (4.5V ~ 16V). Peak output current is reduced to 1.2A for both source and sink. Switching characteristics are significantly slower (35ns rise, 25ns fall). This part is suitable only for low-frequency, room-temperature applications. Product status is active with moderate inventory (1,609 units).

Frequently Asked Questions (FAQ)

Q: Can IXDN602PI be used as a direct replacement for IXDN502PI?

A: Yes. The IXDN602PI is functionally equivalent to the IXDN502PI with identical logic voltage levels, peak output current specifications, and switching characteristics. The IXDN602PI provides an extended supply voltage upper limit of 35V compared to 30V, making it suitable for all applications designed for the IXDN502PI. Both parts use identical 8-DIP through-hole packaging.

Q: What are the limitations of IR4427PBF as a substitute?

A: The IR4427PBF operates within a narrower supply voltage range (6V ~ 20V) compared to the IXDN502PI (4.5V ~ 30V). The logic voltage threshold VIH is 2.7V versus 3V for the IXDN502PI. Switching characteristics are slower (15ns/10ns versus 7.5ns/6.5ns). Applications requiring operation below 6V supply voltage or above 20V supply voltage cannot use this part. High-frequency switching applications may experience performance degradation.

Q: Is TC1427CPA suitable for all IXDN502PI applications?

A: No. The TC1427CPA has significant limitations. The operating temperature range is restricted to 0°C ~ 70°C, making it unsuitable for applications requiring -55°C operation. The supply voltage range is limited to 4.5V ~ 16V, restricting use in systems requiring operation above 16V. Peak output current is reduced to 1.2A, and switching speed is substantially slower. This part is suitable only for low-frequency, room-temperature applications.

Q: Are all substitute parts available in the same 8-DIP package?

A: Yes. All substitute parts (IXDN602PI, IR4427PBF, and TC1427CPA) are available in 8-DIP through-hole packaging with 0.300" (7.62mm) pitch, ensuring direct physical compatibility with existing PCB layouts designed for the IXDN502PI.

Q: What compliance certifications are provided for substitute parts?

A: IXDN602PI carries RoHS3 compliance certification. IR4427PBF and TC1427CPA also carry RoHS3 compliance certification. All parts are classified as REACH Unaffected and carry ECCN EAR99 designation.