IXCP10M35S Equivalent & Substitute Parts

Part Overview

The IXCP10M35S is a current regulator IC manufactured by IXYS in the TO-220-3 package. This through-hole component is designed for power management applications requiring precise current regulation at 10mA output. The part is classified as obsolete, making identification of suitable substitutes essential for ongoing design support and production continuity.

Substiute Parts

IXCP10M35S

IXYSIn Stock: 892IXCP10M35S Datasheet

Current PartRFQ

IXCP10M90S

IXYSIn Stock: 3733IXCP10M90S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IXCP10M35S is determined by the following critical parameters:

Mandatory Matching Criteria:

• Manufacturer series: IXC
• Package type: TO-220-3
• Mounting type: Through Hole
• Function: Current Regulator
• Operating temperature range: -55°C ~ 150°C

Variable Parameters Allowing Substitution:

• Current output rating (10mA primary specification, but higher ratings acceptable for applications with current limiting requirements)
• Input voltage rating (may vary based on application requirements)
• Product status (active parts preferred over obsolete for new designs)

The IXCP10M90S qualifies as a substitute based on identical package, mounting type, series designation, and operating temperature range. The higher 100mA output rating and active product status make this part suitable for replacement in applications where the increased current capacity does not create design conflicts.

Parameter Comparison

Engineering Selection Recommendations

The IXCP10M90S is the designated substitute for the obsolete IXCP10M35S. Selection is based on:

• Product Status: IXCP10M90S maintains active production status, ensuring long-term availability and supply chain stability compared to the obsolete IXCP10M35S.
• Regulatory Compliance: IXCP10M90S carries ROHS3 compliance certification, meeting current environmental and material restriction requirements. Both parts maintain REACH Unaffected status and identical ECCN classification (EAR99).
• Physical Compatibility: Identical TO-220-3 package and through-hole mounting configuration ensure direct PCB footprint compatibility without layout modifications.
• Thermal Performance: Matching operating temperature range (-55°C ~ 150°C) maintains thermal design margins across the full application temperature envelope.

The higher 100mA output rating of the IXCP10M90S requires verification that the application circuit design accommodates this increased current specification. Input voltage rating of 900V on the substitute part exceeds typical requirements for most current regulator applications.

Frequently Asked Questions (FAQ)

Q: Can IXCP10M90S directly replace IXCP10M35S without PCB modifications?

A: Yes. Both parts use identical TO-220-3 package and through-hole mounting configuration. No PCB layout changes are required for physical installation.

Q: What is the primary difference between these two parts?

A: The IXCP10M90S provides 100mA output current regulation compared to 10mA on the IXCP10M35S. The substitute also specifies 900V input voltage rating and maintains active product status versus obsolete classification.

Q: Is the higher current rating of IXCP10M90S a limitation for applications designed for 10mA?

A: The higher current rating does not create incompatibility. Applications designed for 10mA operation will function with the IXCP10M90S. Circuit design must confirm that the increased current capacity does not introduce unintended behavior in the application's current limiting or regulation scheme.

Q: Are there compliance or certification differences between these parts?

A: IXCP10M90S carries ROHS3 compliance certification. Both parts share identical REACH Unaffected status and EAR99 export classification. The substitute part's active status ensures ongoing compliance with evolving regulatory requirements.

Q: What packaging options are available for the substitute part?

A: IXCP10M90S is supplied in tube packaging. Verify packaging format compatibility with your procurement and assembly processes.