IXCP10M35 Equivalent & Substitute Parts

Part Overview

The IXCP10M35 is a current regulator IC manufactured by IXYS in the TO-220-3 package. This component is classified as Power Management (PMIC) and is designed for through-hole mounting applications. The device has reached obsolete product status, making identification of suitable substitute components essential for ongoing design support and production continuity.

Substiute Parts

IXCP10M35

IXYSIn Stock: 803IXCP10M35 Datasheet

Current PartRFQ

IXCP10M90S

IXYSIn Stock: 3733IXCP10M90S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The IXCP10M35 has one identified substitute: IXCP10M90S. Substitution eligibility is determined by the following parameters:

• Manufacturer Series: Both parts belong to the IXC series from IXYS
• Base Product Number: Both share the base product number IXCP10
• Package / Case: Both use TO-220-3 package
• Mounting Type: Both are through-hole mounted components
• Operating Temperature Range: Both operate across -55°C ~ 150°C
• Function: Both are current regulators

The primary difference between these parts is the output current rating: IXCP10M35 provides 10mA output current, while IXCP10M90S provides 100mA output current. Additionally, IXCP10M90S specifies an input voltage rating of 900V.

Parameter Comparison

Engineering Selection Recommendations

The IXCP10M90S is the identified substitute for the obsolete IXCP10M35. Selection of this substitute should be based on the following factors:

Product Status: IXCP10M90S maintains active product status with IXYS, ensuring ongoing availability and support. The IXCP10M35 is obsolete and no longer in active production.

Compliance and Certifications: Both parts share identical REACH status (REACH Unaffected) and ECCN classification (EAR99). IXCP10M90S is RoHS3 compliant, providing enhanced environmental compliance for new designs.

Package Compatibility: Both components use the TO-220-3 package with through-hole mounting, allowing direct physical substitution without PCB redesign.

Current Rating Consideration: The IXCP10M90S provides 100mA output current compared to the 10mA of the IXCP10M35. Circuit designs must accommodate this higher current capability or implement appropriate current-limiting measures if the original 10mA specification is critical.

Frequently Asked Questions (FAQ)

Q: Can IXCP10M90S be used as a direct replacement for IXCP10M35?

A: Physical substitution is possible due to identical TO-220-3 packaging and through-hole mounting. However, the output current rating differs (100mA vs. 10mA), requiring circuit-level evaluation to ensure compatibility with the application's current requirements.

Q: What is the primary reason for seeking a substitute for IXCP10M35?

A: The IXCP10M35 has reached obsolete product status. IXCP10M90S is the identified substitute from the same manufacturer series with active product status and continued availability.

Q: Are there any compliance differences between these parts?

A: Both parts share REACH Unaffected status and EAR99 ECCN classification. IXCP10M90S adds RoHS3 compliance, which may be required for new designs or specific market applications.

Q: What is the significance of the 900V input voltage specification on IXCP10M90S?

A: The IXCP10M90S specifies 900V input voltage rating. This parameter is not provided for the IXCP10M35. Circuit designs must ensure the input voltage does not exceed this specification when using IXCP10M90S.

Q: Are both parts available in the same packaging format?

A: Yes. Both IXCP10M35 and IXCP10M90S use TO-220-3 package with through-hole mounting. IXCP10M90S is supplied in tube packaging, while IXCP10M35 packaging format is not specified in available data.