ITV1212S Equivalent & Substitute Parts Reference

Part Overview

ITV1212S is an isolated DC-DC converter manufactured by XP Power, featuring dual outputs of +12V and -12V with a maximum output current of 41.6mA per channel and a rated power of 1W. The device supports a wide operating temperature range and is designed for ITE (Commercial) applications. As the product status is Active with available inventory, finding alternative models is applicable for design redundancy, sourcing flexibility, or cross-referencing. Alternative or equivalent models must match its key electrical, mechanical, and compliance attributes.

Substiute Parts

ITV1212S

XP PowerIn Stock: 1168ITV1212S Datasheet

Current PartRFQ

CRV1D1212SC

Murata Power Solutions Inc.In Stock: 840CRV1D1212SC Datasheet

DirectRFQ

RH-1212D

Recom PowerIn Stock: 12298RH-1212D Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is strictly determined by direct parameter equivalency between the main part and alternatives. For isolated DC-DC converters, the decisive criteria are input voltage range, output voltages and currents, isolation voltage, power rating, mounting type, package dimensions, package configuration, operating temperature, and compliance certifications. All listed substitutes match the permitted ranges, voltages, currents, isolation, and form factors specified, meeting ROHS3 compliance and active product status.

Parameter Comparison

Engineering Selection Recommendations

All listed parts—ITV1212S, CRV1D1212SC, and RH-1212D—maintain Active status, match key compliance requirements including ROHS3, and carry ECCN EAR99 designation. Moisture Sensitivity Level for RH-1212D and ITV1212S is 1 (Unlimited); CRV1D1212SC is Not Applicable. All options are suitable for selection where compliance and inventory availability are critical considerations.

Frequently Asked Questions (FAQ)

Q1: What electrical parameters must be identical for direct substitution in this DC-DC converter category?
A1: Input voltage range, output voltages, output current ratings, power rating, isolation voltage, and efficiency must match the required specifications for compatible substitution.

Q2: Are the listed substitute models compatible in terms of mounting and package size?
A2: All models use the 7-SIP Module, 5 Leads package with dimensions compatible for footprint and placement in through-hole PCB layouts.

Q3: Do differences in operating temperature affect substitution?
A3: Substitute products provide different upper operating temperature limits; selection should match application requirements. All substitutes meet at least -40°C on the lower end.

Q4: Are all substitute parts compliant with ROHS3 and relevant certification?
A4: All listed parts are ROHS3 compliant and are classified as EAR99 for ECCN, ensuring regulatory conformity.

Q5: Is the moisture sensitivity level comparable across substitutes?
A5: ITV1212S and RH-1212D have MSL 1 (Unlimited), while CRV1D1212SC is Not Applicable for MSL. For typical storage and handling, these designations support standard assembly procedures.

Q6: Are there application-specific features or approvals in the listed substitutes?
A6: All substitutes are designated for ITE (Commercial). RH-1212D additionally lists Medical applications as permitted.

Q7: What package details must be matched for direct substitution?
A7: The substitute must have the same mounting type (Through Hole) and package dimensions compatible with the original (7-SIP Module, 5 Leads, ~0.77" x 0.24" x 0.39"-0.40" H).