ISW0512A-H Equivalent & Substitute Parts Reference

Part Overview

The ISW0512A-H by XP Power is an isolated module DC DC converter featuring a single 12V output at 84mA, designed for ITE (Commercial) applications. This part delivers 1W of output power and integrates standard SCP features, surface mount packaging, and 3 kV isolation. The product is currently classified as Obsolete. When a power module reaches obsolete status, sourcing direct replacements can be critical for sustaining manufacturing and repair cycles; thus, identifying suitable substitute models with matching electrical and mechanical parameters is necessary.

Substiute Parts

ISW0512A-H

XP PowerIn Stock: 1094ISW0512A-H Datasheet

Current PartRFQ

PES1-S5-S12-M-TR

CUI Inc.In Stock: 2403PES1-S5-S12-M-TR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ISW0512A-H are determined strictly by matching the following parameters: output voltage (12V), output current (84mA), input voltage range (near 5V nominal), isolation voltage (3 kV), output power (1W), topology (Isolated Module), mounting type (Surface Mount), lead form, and RoHS compliance. Additional application features such as SCP and ITE (Commercial) are considered. Only substitutes with exact or compatible values across these fields are listed, with no inferences or deviations outside provided specifications.

Parameter Comparison

Engineering Selection Recommendations

The XP Power ISW0512A-H is Obsolete and not suitable for new designs. For ongoing applications or replacement needs, the substitute part PES1-S5-S12-M-TR by CUI Inc. is the manufacturer-recommended equivalent and is classified as Active. Both products hold RoHS compliance, share identical output ratings, input voltage range, isolation characteristics, and mounting type. Certifications and regulatory classifications (ECCN, HTSUS) are supported as supplied.

Frequently Asked Questions (FAQ)

Q: What parameters are critical for selecting a substitute for ISW0512A-H?
A: Substitution decisions are based strictly on output voltage, output current, input voltage range, isolation voltage, power rating, type, mounting, package, and compliance status.

Q: Is PES1-S5-S12-M-TR compatible with the same power and isolation requirements?
A: PES1-S5-S12-M-TR meets all specified requirements for output power (1W), output voltage (12V), output current (84mA), and 3 kV isolation voltage.

Q: Are there package differences to consider for direct replacement?
A: The ISW0512A-H uses a 10-SMD Module, 6 Leads package; PES1-S5-S12-M-TR uses an 8-SMD Module, 5 Leads package. Dimensional differences exist and should be verified for mechanical fit during selection.

Q: Is substitute PES1-S5-S12-M-TR RoHS compliant?
A: Yes, PES1-S5-S12-M-TR is RoHS Compliant.

Q: Does the substitute offer equivalent features to the original?
A: Features such as SCP (Short Circuit Protection), ITE (Commercial) application rating, and surface mount type are present in both the main and substitute part.