ISL89400ABZ Half-Bridge Gate Driver IC Equivalent & Substitute Parts

Part Overview

The ISL89400ABZ is a half-bridge gate driver IC manufactured by Renesas Electronics Corporation, designed for non-inverting N-channel MOSFET applications. This component operates with a supply voltage range of 9V to 14V and delivers peak output currents of 1.25A for both source and sink configurations. The ISL89400ABZ is classified as obsolete, making identification of functionally compatible substitute parts essential for ongoing design support and production continuity.

Substiute Parts

ISL89400ABZ

Renesas Electronics CorporationIn Stock: 1181ISL89400ABZ Datasheet

Current PartRFQ

MAX15012AASA+

Analog Devices Inc./Maxim IntegratedIn Stock: 2022MAX15012AASA+ Datasheet

SimilarRFQ

MAX15012AASA+T

Analog Devices Inc./Maxim IntegratedIn Stock: 2264MAX15012AASA+T Datasheet

SimilarRFQ

MAX15012CASA+

Analog Devices Inc./Maxim IntegratedIn Stock: 827MAX15012CASA+ Datasheet

SimilarRFQ

MAX15012CASA+T

Analog Devices Inc./Maxim IntegratedIn Stock: 1133MAX15012CASA+T Datasheet

SimilarRFQ

MAX15018AASA+

Analog Devices Inc./Maxim IntegratedIn Stock: 699MAX15018AASA+ Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ISL89400ABZ is determined by the following critical parameters:

• Driven Configuration: Must be half-bridge
• Number of Drivers: Must be 2 independent channels
• Gate Type: Must be N-channel MOSFET
• Input Type: Must be non-inverting
• Package / Case: Must be 8-SOIC form factor (0.154", 3.90mm width)
• Mounting Type: Must be surface mount
• RoHS & Compliance: Must maintain ROHS3 compliance and REACH unaffected status

The substitute parts identified are from Analog Devices Inc./Maxim Integrated and are grouped into two categories based on package variant: standard 8-SOIC and 8-SOIC with exposed pad (8-SOIC-EP). All substitute parts maintain active product status, ensuring long-term availability and support.

Parameter Comparison

Engineering Selection Recommendations

For applications requiring direct replacement of the obsolete ISL89400ABZ, the MAX15012 series (MAX15012AASA+, MAX15012AASA+T, MAX15012CASA+, MAX15012CASA+T) represents the primary substitute option. These parts maintain active product status from Analog Devices Inc./Maxim Integrated, ensuring sustained availability and manufacturing support. All MAX15012 variants are ROHS3 compliant and REACH unaffected, meeting regulatory requirements equivalent to the original component.

The MAX15012 series offers enhanced electrical performance compared to the ISL89400ABZ, including higher peak output current (2A versus 1.25A) and increased bootstrap voltage rating (175V versus 100V). The extended operating temperature range (-40°C to 150°C versus -40°C to 125°C) provides additional thermal margin for demanding applications.

Selection between standard 8-SOIC (MAX15012AASA+, MAX15012AASA+T) and 8-SOIC-EP variants (MAX15012CASA+, MAX15012CASA+T) depends on thermal management requirements. The exposed pad variant improves heat dissipation for high-current applications. Packaging format selection (Tube versus Tape & Reel) is determined by production volume and assembly process requirements.

The MAX15018AASA+ is classified as obsolete and should not be selected for new designs despite its higher peak output current (3A) and lower bootstrap voltage (125V), as it does not provide the long-term availability assurance of active products.

Frequently Asked Questions (FAQ)

Q: Can MAX15012 series parts directly replace the ISL89400ABZ without PCB modifications?

A: Yes. The MAX15012 series maintains identical 8-SOIC pinout and form factor compatibility. Pin-for-pin substitution is possible without PCB layout changes. The 8-SOIC-EP variant (MAX15012CASA+, MAX15012CASA+T) includes an exposed pad for thermal management but maintains the same lead positions.

Q: What is the difference between MAX15012AASA+ and MAX15012CASA+ variants?

A: Both parts share identical electrical specifications and active product status. The primary difference is the package variant: MAX15012AASA+ uses standard 8-SOIC, while MAX15012CASA+ uses 8-SOIC-EP (exposed pad). The exposed pad improves thermal performance in high-current applications. Select based on thermal requirements and PCB design capability.

Q: What is the difference between tube and tape & reel packaging?

A: Tube packaging (MAX15012AASA+, MAX15012CASA+) is suitable for lower-volume applications and manual assembly. Tape & Reel packaging (MAX15012AASA+T, MAX15012CASA+T) is optimized for automated pick-and-place assembly in high-volume production. Electrical specifications are identical; selection depends on manufacturing process.

Q: Are the MAX15012 parts compatible with the ISL89400ABZ supply voltage range?

A: The MAX15012 series operates at 8V to 12.6V, which overlaps with the ISL89400ABZ range of 9V to 14V. The MAX15012 minimum supply voltage (8V) is lower, but the maximum (12.6V) is lower than the original part (14V). Verify that your application supply voltage falls within 9V to 12.6V for full compatibility.

Q: Why is the MAX15018AASA+ listed but not recommended?

A: The MAX15018AASA+ is classified as obsolete, which eliminates the primary advantage of substitution—ensuring long-term component availability. While it offers higher peak output current (3A), the active MAX15012 series provides superior bootstrap voltage rating (175V versus 125V) and guaranteed production support.

Q: Do all substitute parts maintain the same compliance certifications?

A: Yes. All identified substitute parts are ROHS3 compliant and REACH unaffected, matching the regulatory status of the ISL89400ABZ. Moisture sensitivity level (MSL 1 - Unlimited) is identical across all parts.