ISL83204AIPZ Equivalent & Substitute Parts

Part Overview

The ISL83204AIPZ is a half-bridge gate driver IC manufactured by Renesas Electronics Corporation, designed for driving N-Channel MOSFETs in half-bridge configurations. This device operates with a supply voltage range of 9.5V to 15V and delivers peak output currents of 2.6A (source) and 2.4A (sink). The part is classified as obsolete, making identification of suitable substitutes essential for ongoing system support and new design implementations.

Substiute Parts

ISL83204AIPZ

Renesas Electronics CorporationIn Stock: 1005ISL83204AIPZ Datasheet

Current PartRFQ

HIP4080AIPZ

Renesas Electronics CorporationIn Stock: 2696HIP4080AIPZ Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ISL83204AIPZ is determined by the following critical parameters:

• Package Compatibility: Both parts must use the 20-DIP (0.300", 7.62mm) form factor to ensure direct PCB mounting without redesign
• Supply Voltage Range: The substitute must operate within or encompass the 9.5V to 15V supply voltage specification
• Peak Output Current: The substitute must deliver at least 2.6A source and 2.4A sink current capability
• Manufacturer: Renesas Electronics Corporation maintains consistent pin configurations and electrical characteristics across compatible driver families
• Compliance Standards: RoHS3 compliance and MSL rating ensure environmental and reliability consistency

The HIP4080AIPZ qualifies as a substitute based on matching package type, supply voltage range, peak output current specification, and compliance certifications. However, the HIP4080AIPZ operates as a full-bridge driver rather than a half-bridge configuration, requiring circuit topology evaluation during implementation.

Parameter Comparison

Engineering Selection Recommendations

The HIP4080AIPZ is an active product with current manufacturing support from Renesas Electronics Corporation, providing supply chain continuity for the obsolete ISL83204AIPZ. Both devices share identical package geometry, supply voltage specifications, and peak output current ratings, enabling direct pin-compatible replacement in applications where the full-bridge topology is compatible with the existing circuit design.

The operating temperature range differs between the two devices: the ISL83204AIPZ operates to 125°C junction temperature, while the HIP4080AIPZ operates to 85°C ambient temperature. Applications requiring the extended temperature capability of the original part must evaluate thermal management and ambient conditions during substitution.

Both parts maintain ROHS3 compliance and unlimited moisture sensitivity rating, ensuring consistent environmental and reliability standards across the substitution.

Frequently Asked Questions (FAQ)

Q: Can the HIP4080AIPZ directly replace the ISL83204AIPZ in all applications?

A: Direct replacement is possible only if the circuit topology supports full-bridge driver operation. The ISL83204AIPZ is configured as a half-bridge driver, while the HIP4080AIPZ is a full-bridge driver. Circuit schematic review is required to confirm compatibility.

Q: Are the pin assignments identical between these two parts?

A: Both devices use the 20-DIP package with identical physical dimensions. Pin-level compatibility must be verified against the respective datasheets, as functional pin assignments may differ between half-bridge and full-bridge configurations.

Q: What is the impact of the different operating temperature ranges?

A: The ISL83204AIPZ specifies junction temperature operation to 125°C, while the HIP4080AIPZ specifies ambient temperature operation to 85°C. Applications operating at elevated temperatures must evaluate whether the HIP4080AIPZ thermal characteristics meet system requirements.

Q: Are both parts RoHS compliant?

A: Yes, both the ISL83204AIPZ and HIP4080AIPZ are ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).

Q: What is the supply voltage compatibility between these parts?

A: Both parts operate within the 9.5V to 15V supply voltage range, ensuring direct compatibility for power supply specifications.

Q: Is the HIP4080AIPZ currently available?

A: The HIP4080AIPZ is classified as an active product with current manufacturing support, providing ongoing supply chain availability compared to the obsolete ISL83204AIPZ.