ISL8200AMIRZ Equivalent & Substitute Parts Reference

Part Overview

The ISL8200AMIRZ from Renesas Electronics Corporation is a non-isolated point-of-load (PoL) DC-DC converter module intended for ITE (Commercial) applications. It supports a single output voltage adjustable between 0.6V and 6V, with a maximum output current of 10A, and operates from a 3V to 20V input supply. The product is currently classified as Obsolete, necessitating the identification of substitute models for ongoing design support, inventory replenishment, and new projects where equivalent electrical and mechanical performance are required.

Substiute Parts

ISL8200AMIRZ

Renesas Electronics CorporationIn Stock: 1385ISL8200AMIRZ Datasheet

Current PartRFQ

RAA210130

Renesas Electronics CorporationIn Stock: 1145RAA210130 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic is strictly based on matching key electrical and mechanical parameters relevant to the non-isolated PoL module DC-DC converter category. Allowed matching parameters are Manufacturer, Type, Number of Outputs, Voltage - Input (Min/Max), Voltage - Output Range, Maximum Output Current, Applications, Mounting Type, RoHS Status, and REACH Status. Only substitute parts which fall within these bounds and are listed as active can be considered for direct replacement.

Parameter Comparison

Engineering Selection Recommendations

The ISL8200AMIRZ is obsolete; therefore, further component selection must be based on parts with an active product status and valid compliance certifications (RoHS3, REACH). Only substitute parts from the same manufacturer and with similar compliance, mounting method, and application rating can be considered under these criteria.

Frequently Asked Questions (FAQ)

Q1: What are the main substitution criteria for DC-DC converter non-isolated PoL modules?
A1: Substitute parts are determined by matching manufacturer, electrical operating range (input/output voltages, output current), number of outputs, mounting type, compliance certifications (RoHS, REACH), and application classification.

Q2: Do substitute parts require the same package size or pinout?
A2: Only the surface mount mounting type is specified as a requirement in the provided parameters. Mechanical compatibility beyond mounting type should be confirmed based on the provided datasheet dimensions.

Q3: Can substitutes support different input or output voltage ranges?
A3: Substitute parts must operate within the range specified by the key parameters from the input. Only listed values are used for evaluation.

Q4: Why is it necessary to seek substitutes for the ISL8200AMIRZ?
A4: The product status is Obsolete, which limits availability for ongoing procurement and design use.

Q5: Are compliance certifications important for part substitution?
A5: Yes, only parts with equivalent RoHS and REACH status as the ISL8200AMIRZ are permitted as substitutes.