Equivalent & Substitute Parts Reference for ISE1212A-TR

Part Overview

ISE1212A-TR is an isolated module DC-DC converter by XP Power, providing a single regulated 12V output at up to 84mA from a 10.8V to 13.2V input range. This part is categorized under isolated DC-DC converters for ITE (Commercial) applications and features surface-mount (8-SMD Module, 5 Leads) packaging. With a maximum power rating of 1W and 1.5 kV isolation, the ISE1212A-TR is RoHS3 compliant and currently listed as obsolete. As the product status is obsolete, identification of alternative models with closely matched electrical and mechanical parameters is necessary to maintain system compatibility and production continuity.

Substiute Parts

ISE1212A-TR

XP PowerIn Stock: 752ISE1212A-TR Datasheet

Current PartRFQ

IES0112S12

XP PowerIn Stock: 966IES0112S12 Datasheet

MFR RecommendedRFQ

IES0112S12

XP PowerIn Stock: 966IES0112S12 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are grouped according to strict matching of electrical parameters, mechanical outlines, and compliance attributes. Only modules with the following identical characteristics are listed as substitutes:

• Isolated module configuration
• Single output
• Input voltage range: 10.8V–13.2V
• Output voltage: 12V
• Output current: 84mA
• Power rating: 1W
• Isolation voltage: 1.5kV
• ITE (Commercial) suitability
• Surface-mount, 8-SMD Module, 5 Leads package
• Comparable dimensions
• RoHS3 compliance

Parameter Comparison

Engineering Selection Recommendations

Selection of substitute parts for the obsolete ISE1212A-TR should be based on continued compliance with ROHS3 and matching of regulatory status. Substitute model IES0112S12 is listed as active, is ROHS3 compliant, features relevant ITE application classification, and carries CE, UKCA, and UL certifications. Both modules use 8-SMD Module, 5 Leads packaging and feature surface mount compatibility. All electrical parameters and essential mechanical considerations match the original part.

Frequently Asked Questions (FAQ)

Q1: What are the required criteria to substitute ISE1212A-TR with IES0112S12?
A1: Substitution requires matching input voltage range, output voltage, output current, isolation voltage, power rating, mounting type, package/case, application, efficiency, operating temperature, and RoHS compliance.

Q2: Is there any difference in package size or mounting for IES0112S12?
A2: Both models feature 8-SMD Module, 5 Leads surface-mount packaging. The dimensions are similar, with minor variation in length and width, both maintaining the same height.

Q3: Does IES0112S12 have the same application suitability as ISE1212A-TR?
A3: Yes, both are suitable for ITE (Commercial) applications and support surface mount integration.

Q4: What certifications or compliance statuses must be considered?
A4: Select substitute modules that are ROHS3 compliant and maintain relevant certifications as listed. Main and substitute models both conform to specified standards.

Q5: Is there a difference in output or input voltage specifications between the parts?
A5: Input and output voltage specifications are identical for both parts, supporting direct replacement in designs where these parameters are critical.

Q6: Is efficiency or operating temperature critical for substitution?
A6: Efficiency and operating temperature are both closely matched; substitution meets required operational conditions within these specifications.