IRSM515-035PATR Equivalent & Substitute Parts

Part Overview

The IRSM515-035PATR is a half bridge driver IC manufactured by Infineon Technologies, designed for AC motor applications. This device integrates a 2.1A output driver with bootstrap circuit protection and UVLO fault protection in a 23-PowerSMD Module package. The product is currently obsolete, making identification of suitable substitute components essential for system redesign, legacy support, or inventory replacement scenarios.

Substiute Parts

IRSM515-035PATR

Infineon TechnologiesIn Stock: 2253IRSM515-035PATR Datasheet

Current PartRFQ

IM241S6S1BAUMA1

Infineon TechnologiesIn Stock: 1245IM241S6S1BAUMA1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IRSM515-035PATR is determined by the following critical parameters:

Package Compatibility: Both the main part and substitute must use the 23-PowerSMD Module package to ensure mechanical and electrical fit on existing PCB layouts.

Electrical Configuration: The substitute must support three-phase or half-bridge driver functionality suitable for AC motor control applications.

Current Rating: The substitute current rating must meet or exceed 2A per channel to maintain system performance.

Voltage Specifications: The substitute must accommodate the maximum load voltage of 400V and operate within compatible supply voltage ranges.

Compliance & Status: Active product status with ROHS3 compliance ensures long-term availability and regulatory alignment.

The identified substitute IM241S6S1BAUMA1 meets these criteria through identical package specification, compatible voltage ratings, and equivalent current handling capability.

Parameter Comparison

Engineering Selection Recommendations

The IM241S6S1BAUMA1 is the manufacturer-recommended substitute for the obsolete IRSM515-035PATR. Both components are manufactured by Infineon Technologies and share identical 23-PowerSMD Module packaging, ensuring direct PCB compatibility without layout modifications.

The substitute provides enhanced specifications: the IM241S6S1BAUMA1 supports 600V load voltage compared to the original 400V maximum, offering additional design margin for AC motor applications. Current ratings are equivalent (2A vs. 2.1A), maintaining system performance requirements.

Both parts maintain ROHS3 compliance and REACH unaffected status. The substitute's active product status ensures ongoing availability and supply chain stability, addressing the obsolescence of the original component.

Frequently Asked Questions (FAQ)

Q: Can the IM241S6S1BAUMA1 directly replace the IRSM515-035PATR on existing PCBs?

A: Yes. Both components use the identical 23-PowerSMD Module package with surface mount configuration. No PCB layout modifications are required for mechanical or electrical fit.

Q: What are the key differences between these parts?

A: The primary differences are product status and maximum load voltage. The IRSM515-035PATR is obsolete with 400V maximum load rating, while the IM241S6S1BAUMA1 is active with 600V maximum load rating. Current ratings are functionally equivalent (2.1A vs. 2A).

Q: Are there compliance or regulatory differences?

A: Both parts are ROHS3 compliant and REACH unaffected. No regulatory barriers exist for substitution.

Q: What packaging options are available for the substitute?

A: The IM241S6S1BAUMA1 is supplied in Tape & Reel (TR) packaging, suitable for automated assembly processes.

Q: Does the higher voltage rating of the substitute affect system design?

A: No. The substitute's 600V load voltage rating exceeds the original 400V specification, providing additional design margin without requiring circuit modifications for AC motor applications operating within the original voltage envelope.