IRS2807DSPBF Equivalent & Substitute Parts

Part Overview

The IRS2807DSPBF is a high-side or low-side gate driver IC manufactured by Infineon Technologies, designed for driving IGBT and N-Channel MOSFET gates in power management applications. This device operates with a supply voltage range of 10V to 20V and delivers peak output currents of 200mA (source) and 350mA (sink), making it suitable for synchronous switching configurations requiring dual-channel gate drive capability.

The IRS2807DSPBF is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain reliability, and support ongoing production requirements for systems utilizing this gate driver topology.

Substiute Parts

IRS2807DSPBF

Infineon TechnologiesIn Stock: 961IRS2807DSPBF Datasheet

Current PartRFQ

IRS2807DSTRPBF

Infineon TechnologiesIn Stock: 1146IRS2807DSTRPBF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IRS2807DSPBF is determined by strict equivalence across the following critical parameters:

• Driven Configuration: High-Side or Low-Side capability
• Channel Type: Synchronous dual-channel operation
• Number of Drivers: 2 channels
• Gate Type: IGBT and N-Channel MOSFET compatibility
• Voltage - Supply: 10V ~ 20V operating range
• Logic Voltage Thresholds: VIL 0.8V, VIH 2.2V
• Current - Peak Output: 200mA source, 350mA sink
• Input Type: Non-Inverting logic
• High Side Voltage - Max (Bootstrap): 600 V
• Rise / Fall Time: 150ns rise, 50ns fall (typical)
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 8-SOIC form factor
• Supplier Device Package: PG-DSO-8-903

Substitute parts must maintain identical electrical performance across all parameters listed above. Packaging format differences (tube versus tape & reel) do not affect functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

The IRS2807DSTRPBF is the direct functional equivalent of the IRS2807DSPBF. Both devices share identical electrical specifications, gate drive capabilities, and thermal operating ranges. The primary distinction is product status: the IRS2807DSPBF is obsolete, while the IRS2807DSTRPBF maintains active status with Infineon Technologies.

Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for current manufacturing environments. The IRS2807DSTRPBF is supplied in tape & reel packaging format, which is standard for high-volume production workflows, whereas the original part was supplied in tube format.

For new designs or ongoing production requiring gate driver functionality equivalent to the IRS2807DSPBF, the IRS2807DSTRPBF is the appropriate selection based on active product availability and identical electrical performance.

Frequently Asked Questions (FAQ)

Q: Can the IRS2807DSTRPBF directly replace the IRS2807DSPBF in existing designs?

A: Yes. The IRS2807DSTRPBF is electrically and functionally identical to the IRS2807DSPBF across all specified parameters. No circuit modifications are required. The only difference is packaging format (tape & reel versus tube) and product status (active versus obsolete).

Q: What is the significance of the packaging format difference between these parts?

A: The IRS2807DSPBF is supplied in tube packaging, while the IRS2807DSTRPBF is supplied in tape & reel format. Both contain the same die and deliver identical performance. Tape & reel packaging is standard for automated assembly processes and high-volume production. Tube packaging is typically used for lower-volume or manual assembly applications.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both the IRS2807DSPBF and IRS2807DSTRPBF maintain identical RoHS3 compliance, REACH unaffected status, and moisture sensitivity levels. Both are suitable for applications requiring regulatory compliance in current manufacturing environments.

Q: Why is the IRS2807DSPBF classified as obsolete?

A: The IRS2807DSPBF has reached end-of-life status with Infineon Technologies. The IRS2807DSTRPBF represents the active production equivalent, ensuring continued availability and supply chain support for this gate driver topology.

Q: What are the critical parameters that must match for substitution?

A: Substitution requires equivalence in driven configuration (high-side or low-side), channel type (synchronous), number of drivers (2), gate type (IGBT and N-Channel MOSFET), supply voltage range (10V ~ 20V), logic voltage thresholds (0.8V, 2.2V), peak output currents (200mA source, 350mA sink), input type (non-inverting), bootstrap voltage rating (600V), timing characteristics (150ns rise, 50ns fall), operating temperature range (-40°C ~ 125°C), and package form factor (8-SOIC PG-DSO-8-903).