IRLR024TRR N-Channel 60V 14A MOSFET DPAK Equivalent & Substitute Parts

Part Overview

The IRLR024TRR is an N-Channel metal oxide semiconductor field-effect transistor (MOSFET) manufactured by Vishay Siliconix, rated for 60V drain-to-source voltage and 14A continuous drain current in a surface mount DPAK package. The device is classified as Active product status and is RoHS non-compliant. Equivalent and substitute parts are identified based on matching or compatible electrical and mechanical parameters within the N-Channel MOSFET category, specifically for applications requiring similar voltage, current, and thermal characteristics in the same DPAK form factor.

Key Parameters

Parameter	Value	Unit
Drain to Source Voltage (Vdss)	60	V
Continuous Drain Current (Id) @ 25°C	14	A (Tc)
Rds On (Max) @ Id, Vgs	100 mOhm @ 8.4A, 5V	mOhm
Gate Threshold Voltage Vgs(th) (Max) @ Id	2	V @ 250µA
Gate Charge (Qg) (Max) @ Vgs	18	nC @ 5V
Input Capacitance (Ciss) (Max) @ Vds	870	pF @ 25V
Power Dissipation (Max)	2.5 (Ta), 42 (Tc)	W
Operating Temperature Range	-55 to 150	°C (TJ)
Mounting Type	Surface Mount	—
Package / Case	TO-252-3, DPAK (2 Leads + Tab), SC-63	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the IRLR024TRR are grouped based on the following critical electrical and mechanical parameters:

Primary Substitution Criteria:

Drain to Source Voltage (Vdss): 60V (exact match required for direct substitution)
Continuous Drain Current (Id): 14A or greater
On-State Resistance (Rds On): 100 mOhm or lower at specified gate voltage
Package Type: DPAK (TO-252-3) surface mount form factor
Operating Temperature Range: -55°C to 150°C minimum
Mounting Type: Surface Mount

Secondary Compatibility Factors:

Gate Threshold Voltage (Vgs(th)): 2V to 5V range
Gate Charge (Qg): 18 nC or lower preferred for switching performance
Input Capacitance (Ciss): 870 pF or lower
Moisture Sensitivity Level: MSL 1 (Unlimited)

Parts that meet all primary criteria are classified as direct parametric equivalents. Parts with higher voltage ratings or different current ratings are listed as functional alternatives for specific application contexts but require circuit-level verification.

Parameter Comparison

Part Number	Manufacturer	Vdss (V)	Id @ 25°C (A)	Rds On (mOhm)	Vgs(th) (V)	Qg (nC)	Ciss (pF)	Power Dissipation (W)	Temp Range (°C)	Package	RoHS Status	Product Status
IRLR024TRR	Vishay Siliconix	60	14	100 @ 8.4A, 5V	2 @ 250µA	18 @ 5V	870 @ 25V	2.5 (Ta), 42 (Tc)	-55 to 150	DPAK	Non-compliant	Active
IRLR024TRPBF	Vishay Siliconix	60	14	100 @ 8.4A, 5V	2 @ 250µA	18 @ 5V	870 @ 25V	2.5 (Ta), 42 (Tc)	-55 to 150	DPAK	ROHS3 Compliant	Active
FQD13N06LTM	onsemi	60	11	115 @ 5.5A, 10V	2.5 @ 250µA	6.4 @ 5V	350 @ 25V	2.5 (Ta), 28 (Tc)	-55 to 150	DPAK	ROHS3 Compliant	Active
HUF76407D3ST	onsemi	60	12	92 @ 13A, 10V	3 @ 250µA	11.3 @ 10V	350 @ 25V	38 (Tc)	-55 to 175	DPAK	ROHS3 Compliant	Active
IRLR024NTRPBF	Infineon Technologies	55	17	65 @ 10A, 10V	2 @ 250µA	15 @ 5V	480 @ 25V	45 (Tc)	-55 to 175	DPAK	ROHS3 Compliant	Active
RFD3055LESM9A	onsemi	60	11	107 @ 8A, 5V	3 @ 250µA	11.3 @ 10V	350 @ 25V	38 (Tc)	-55 to 175	DPAK	ROHS3 Compliant	Active
STD12NF06T4	STMicroelectronics	60	12	100 @ 6A, 10V	4 @ 250µA	12 @ 10V	315 @ 25V	30 (Tc)	-55 to 175	DPAK	ROHS3 Compliant	Active
FQD16N25CTM	onsemi	250	16	270 @ 8A, 10V	4 @ 250µA	53.5 @ 10V	1080 @ 25V	160 (Tc)	-55 to 150	DPAK	ROHS3 Compliant	Active
FCD4N60TM	onsemi	600	3.9	1.2 @ 2A, 10V	5 @ 250µA	16.6 @ 10V	540 @ 25V	50 (Tc)	-55 to 150	DPAK	ROHS3 Compliant	Not For New Designs
FDD3N40TM	onsemi	400	2	3.4 @ 1A, 10V	5 @ 250µA	6 @ 10V	225 @ 25V	30 (Tc)	-55 to 150	DPAK	ROHS3 Compliant	Active
FQD2N100TM	onsemi	1000	1.6	9 @ 800mA, 10V	5 @ 250µA	15.5 @ 10V	520 @ 25V	2.5 (Ta), 50 (Tc)	-55 to 150	DPAK	ROHS3 Compliant	Active

Engineering Selection Recommendations

Direct Parametric Equivalent (Recommended Primary Substitute):

The IRLR024TRPBF is the direct parametric equivalent to the IRLR024TRR. Both parts are manufactured by Vishay Siliconix and share identical electrical specifications: 60V Vdss, 14A continuous drain current, 100 mOhm Rds On, and DPAK package. The primary distinction is packaging format (Tape & Reel vs. standard) and RoHS compliance status. The IRLR024TRPBF is ROHS3 compliant, whereas the IRLR024TRR is non-compliant. This part is suitable for direct replacement in all applications where the IRLR024TRR is currently specified.

Voltage-Matched Alternatives (60V Rating):

The following parts maintain the 60V Vdss rating and DPAK package, making them suitable for applications with identical voltage requirements:

FQD13N06LTM (onsemi): 11A continuous drain current, lower gate charge (6.4 nC), reduced input capacitance (350 pF). Suitable for applications where lower switching losses are prioritized. Product Status: Active, ROHS3 Compliant.
HUF76407D3ST (onsemi): 12A continuous drain current, improved Rds On (92 mOhm), extended operating temperature to 175°C. Suitable for thermal-constrained applications. Product Status: Active, ROHS3 Compliant.
RFD3055LESM9A (onsemi): 11A continuous drain current, comparable Rds On (107 mOhm), extended operating temperature to 175°C. Product Status: Active, ROHS3 Compliant.
STD12NF06T4 (STMicroelectronics): 12A continuous drain current, 100 mOhm Rds On, extended operating temperature to 175°C. Product Status: Active, ROHS3 Compliant.

Higher Voltage Alternatives (Application-Dependent):

FQD16N25CTM (onsemi): 250V Vdss, 16A continuous drain current. Suitable only for applications where higher voltage margin is required. Higher Rds On (270 mOhm) and gate charge (53.5 nC) result in increased power dissipation and switching losses. Product Status: Active, ROHS3 Compliant.
IRLR024NTRPBF (Infineon Technologies): 55V Vdss, 17A continuous drain current, improved Rds On (65 mOhm), extended operating temperature to 175°C. Suitable for applications requiring higher current capacity with minimal voltage margin reduction. Product Status: Active, ROHS3 Compliant.

Not Recommended for New Designs:

FCD4N60TM (onsemi): 600V Vdss, 3.9A continuous drain current. Product Status: Not For New Designs. Significant voltage and current rating mismatch makes this unsuitable for direct substitution.

Compliance and Certification Considerations:

All recommended substitute parts carry ROHS3 compliance certification. The original IRLR024TRR is RoHS non-compliant. Selection of ROHS3-compliant alternatives is required for applications subject to RoHS regulatory requirements. All parts listed maintain MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard handling and storage procedures.

Frequently Asked Questions (FAQ)

Q: Can the IRLR024TRPBF be used as a direct replacement for the IRLR024TRR?

A: Yes. The IRLR024TRPBF is a direct parametric equivalent with identical electrical specifications (60V, 14A, 100 mOhm Rds On, DPAK package). The primary difference is packaging format (Tape & Reel) and RoHS compliance status (ROHS3 Compliant vs. Non-compliant). No circuit modifications are required.

Q: What is the key difference between the IRLR024TRR and FQD13N06LTM?

A: Both parts share the same 60V Vdss rating and DPAK package. The FQD13N06LTM has lower continuous drain current (11A vs. 14A), lower gate charge (6.4 nC vs. 18 nC), and reduced input capacitance (350 pF vs. 870 pF). The FQD13N06LTM is suitable for applications where switching speed and reduced gate drive power are priorities, but cannot support the full 14A current rating of the original part.

Q: Can I use the IRLR024NTRPBF (55V) instead of the IRLR024TRR (60V)?

A: The IRLR024NTRPBF has a 55V Vdss rating compared to the 60V rating of the IRLR024TRR. This represents a 5V reduction in maximum drain-to-source voltage. Substitution is permissible only in applications where the actual operating voltage does not exceed 55V and where the 5V margin reduction is acceptable for the circuit design. The IRLR024NTRPBF offers improved Rds On (65 mOhm vs. 100 mOhm) and higher current capacity (17A vs. 14A).

Q: Are all substitute parts available in the same DPAK package?

A: Yes. All substitute parts listed are available in the DPAK (TO-252-3) surface mount package with identical pin configuration (2 Leads + Tab, SC-63). Physical board layout compatibility is maintained across all listed alternatives.

Q: What is the significance of the RoHS compliance difference?

A: The IRLR024TRR is RoHS non-compliant, while all listed substitute parts are ROHS3 compliant. RoHS compliance restricts the use of hazardous substances (lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers). Selection of ROHS3-compliant parts is mandatory for applications subject to RoHS regulatory requirements in the European Union and other jurisdictions with equivalent regulations.

Q: Can the FQD16N25CTM (250V) be used in place of the IRLR024TRR (60V)?

A: The FQD16N25CTM has a significantly higher voltage rating (250V vs. 60V) and lower current rating (16A vs. 14A). While the higher voltage rating provides additional safety margin, the substantially higher Rds On (270 mOhm vs. 100 mOhm) and gate charge (53.5 nC vs. 18 nC) result in increased power dissipation and switching losses. Substitution is not recommended for direct replacement applications. Use only in applications specifically designed for higher voltage operation.

Q: What is the operating temperature range difference between the IRLR024TRR and substitute parts?

A: The IRLR024TRR operates from -55°C to 150°C (TJ). Several substitute parts extend the upper operating temperature to 175°C (HUF76407D3ST, IRLR024NTRPBF, RFD3055LESM9A, STD12NF06T4). This extended range is beneficial for thermal-constrained applications but is not required for direct substitution in applications operating within the -55°C to 150°C range.

Q: How do I determine which substitute part is best for my application?

A: Selection depends on application-specific requirements: (1) If voltage and current ratings must match exactly, use IRLR024TRPBF. (2) If lower switching losses are required, use FQD13N06LTM. (3) If extended operating temperature is needed, use HUF76407D3ST, IRLR024NTRPBF, RFD3055LESM9A, or STD12NF06T4. (4) If RoHS compliance is mandatory, all substitute parts except the original IRLR024TRR meet this requirement. Verify that the selected part meets all electrical, thermal, and regulatory requirements of the target application.

Q: Is the MSL (Moisture Sensitivity Level) rating the same across all parts?

A: Yes. The IRLR024TRR and all listed substitute parts carry MSL 1 (Unlimited) rating. This indicates unlimited shelf life and no special moisture control requirements during storage, handling, or assembly. Standard PCB assembly procedures are applicable to all listed parts.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message