IRL620STRLPBF N-Channel MOSFET Equivalent & Substitute Parts

Part Overview

The IRL620STRLPBF is an N-Channel MOSFET manufactured by Vishay Siliconix, rated for 200V drain-to-source voltage with a continuous drain current of 5.2A at 25°C. This device is housed in a TO-263 (D2PAK) surface mount package and is classified as Active product status. The part is supplied in Cut Tape (CT) packaging with 20,500 pieces currently in stock.

Equivalent and substitute parts are identified based on matching electrical characteristics and mechanical compatibility. Substitutes enable procurement flexibility when the primary part number experiences supply constraints or when alternative packaging formats are required for manufacturing processes.

Key Parameters

Parameter	Value	Unit
FET Type	N-Channel	—
Technology	MOSFET (Metal Oxide)	—
Drain to Source Voltage (Vdss)	200	V
Current - Continuous Drain (Id) @ 25°C	5.2	A (Tc)
Rds On (Max) @ Id, Vgs	800	mOhm @ 3.1A, 10V
Vgs(th) (Max) @ Id	2	V @ 250µA
Gate Charge (Qg) (Max) @ Vgs	16	nC @ 5V
Vgs (Max)	±10	V
Input Capacitance (Ciss) (Max) @ Vds	360	pF @ 25V
Power Dissipation (Max)	3.1 (Ta), 50 (Tc)	W
Operating Temperature	-55 to 150	°C (TJ)
Mounting Type	Surface Mount	—
Package / Case	TO-263-3, D2PAK (2 Leads + Tab), TO-263AB	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of N-Channel MOSFETs is determined by electrical parameter equivalence and mechanical compatibility. The IRL620STRLPBF and its substitutes share identical electrical specifications across all critical parameters: 200V Vdss rating, 5.2A continuous drain current, 800mOhm maximum on-resistance, gate threshold voltage, gate charge, and input capacitance. All parts are housed in the TO-263 (D2PAK) surface mount package with identical pin configurations.

The substitute parts differ only in packaging format (Cut Tape versus Tube versus Tape & Reel) and inventory availability. These packaging variations do not affect electrical performance or mechanical fit on printed circuit boards. Substitution is valid when the application requirements match the following key parameters:

Drain to Source Voltage (Vdss): 200V
Continuous Drain Current (Id): 5.2A @ 25°C
On-Resistance (Rds On): 800mOhm @ 3.1A, 10V
Gate Threshold Voltage (Vgs(th)): 2V @ 250µA
Operating Temperature Range: -55°C to 150°C
Package Type: TO-263 (D2PAK) surface mount

Parameter Comparison

Parameter	IRL620STRLPBF	SIHL620S-GE3	SIHL620STRL-GE3
Manufacturer	Vishay Siliconix	Vishay Siliconix	Vishay Siliconix
FET Type	N-Channel	N-Channel	N-Channel
Technology	MOSFET (Metal Oxide)	MOSFET (Metal Oxide)	MOSFET (Metal Oxide)
Vdss	200V	200V	200V
Id @ 25°C	5.2A (Tc)	5.2A (Tc)	5.2A (Tc)
Rds On (Max)	800mOhm @ 3.1A, 10V	800mOhm @ 3.1A, 10V	800mOhm @ 3.1A, 10V
Vgs(th) (Max)	2V @ 250µA	2V @ 250µA	2V @ 250µA
Gate Charge (Qg)	16nC @ 5V	16nC @ 5V	16nC @ 5V
Vgs (Max)	±10V	±10V	±10V
Ciss (Max)	360pF @ 25V	360pF @ 25V	360pF @ 25V
Power Dissipation (Max)	3.1W (Ta), 50W (Tc)	3.1W (Ta), 50W (Tc)	3.1W (Ta), 50W (Tc)
Operating Temperature	-55°C to 150°C (TJ)	-55°C to 150°C (TJ)	-55°C to 150°C (TJ)
Package / Case	TO-263-3, D2PAK	TO-263-3, D2PAK	TO-263-3, D2PAK
Mounting Type	Surface Mount	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Packaging Format	Cut Tape (CT)	Tube	Tape & Reel (TR)
Product Status	Active	Active	Active

Engineering Selection Recommendations

All three parts—IRL620STRLPBF, SIHL620S-GE3, and SIHL620STRL-GE3—are manufactured by Vishay Siliconix and maintain Active product status. Each part is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity classification, indicating equivalent environmental and regulatory compliance.

Selection between these parts is determined by packaging and supply requirements:

IRL620STRLPBF is supplied in Cut Tape (CT) format with 20,500 pieces in stock. This packaging is suitable for manual component handling and small-scale assembly operations.

SIHL620S-GE3 is supplied in Tube packaging with 1,512 pieces in stock. Tube packaging accommodates automated pick-and-place equipment configured for tube-fed component dispensing.

SIHL620STRL-GE3 is supplied in Tape & Reel (TR) format with 1,831 pieces in stock. Tape & Reel packaging is the standard format for high-volume surface mount assembly lines using automated component feeders.

All three parts are electrically and mechanically interchangeable. Selection should be based on manufacturing process requirements and available inventory.

Frequently Asked Questions (FAQ)

Q: Are SIHL620S-GE3 and SIHL620STRL-GE3 direct replacements for IRL620STRLPBF?

A: Yes. All three parts share identical electrical specifications and are housed in the TO-263 (D2PAK) surface mount package. The only differences are packaging format (Cut Tape, Tube, or Tape & Reel) and inventory quantities. Electrical performance and PCB compatibility are equivalent.

Q: What is the difference between Cut Tape, Tube, and Tape & Reel packaging?

A: Cut Tape (CT) consists of individual components cut from a continuous tape strip, suitable for manual assembly. Tube packaging contains loose components in a plastic tube, compatible with tube-fed automated equipment. Tape & Reel (TR) packaging maintains components on a continuous reel with carrier tape, designed for high-speed automated assembly lines. All three formats contain the same component with identical electrical characteristics.

Q: Can I use SIHL620STRL-GE3 in place of IRL620STRLPBF in an existing design?

A: Yes. Both parts are N-Channel MOSFETs with 200V Vdss, 5.2A continuous drain current, and identical on-resistance, threshold voltage, and gate charge specifications. The TO-263 (D2PAK) package pinout is identical. No circuit modifications are required.

Q: Are all three parts RoHS compliant?

A: Yes. IRL620STRLPBF, SIHL620S-GE3, and SIHL620STRL-GE3 are all ROHS3 compliant. All parts carry MSL Level 1 (Unlimited) moisture sensitivity classification.

Q: Which part should I select for high-volume manufacturing?

A: SIHL620STRL-GE3 in Tape & Reel format is the standard choice for high-volume surface mount assembly. This packaging format integrates directly with automated component feeders used in production lines.

Q: What is the operating temperature range for these MOSFETs?

A: All three parts operate across a junction temperature range of -55°C to 150°C (TJ), providing equivalent thermal performance across the full product line.

Q: Do these parts have the same gate charge characteristics?

A: Yes. All three parts have a maximum gate charge (Qg) of 16nC at 5V, ensuring identical switching speed and drive circuit requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message