IRGS6B60KDPBF IGBT 600V 13A Equivalent & Substitute Parts

Part Overview

The IRGS6B60KDPBF is an NPT (Non-Punch-Through) IGBT manufactured by Infineon Technologies, rated for 600V collector-emitter breakdown voltage with 13A maximum collector current and 90W power dissipation. This device is packaged in a D2PAK (TO-263-3) surface mount configuration and is classified as obsolete. Due to its obsolete status, equivalent substitute parts with active product status are necessary to maintain design continuity and ensure long-term supply chain reliability. Substitute devices must maintain compatibility with the D2PAK package and preserve the 600V voltage rating while accommodating variations in current handling and switching characteristics.

Substiute Parts

IRGS6B60KDPBF

Infineon TechnologiesIn Stock: 2034IRGS6B60KDPBF Datasheet

Current PartRFQ

IKB06N60TATMA1

Infineon TechnologiesIn Stock: 1666IKB06N60TATMA1 Datasheet

MFR RecommendedRFQ

IKB10N60TATMA1

Infineon TechnologiesIn Stock: 752IKB10N60TATMA1 Datasheet

MFR RecommendedRFQ

STGB6NC60HDT4

STMicroelectronicsIn Stock: 1918STGB6NC60HDT4 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IRGS6B60KDPBF is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Voltage - Collector Emitter Breakdown (Max): Must equal 600V
• Package / Case: Must be TO-263-3 / D2PAK (2 Leads + Tab)
• Mounting Type: Must be Surface Mount
• Input Type: Must be Standard

Secondary Compatibility Parameters:

• Current - Collector (Ic) (Max): Substitute must meet or exceed 13A
• Power - Max: Substitute must meet or exceed 90W
• Operating Temperature Range: Substitute must cover or exceed -55°C to 150°C

Compliance Requirements:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

The three substitute parts listed below satisfy all primary criteria and maintain electrical compatibility within the specified parameter ranges.

Parameter Comparison

Engineering Selection Recommendations

IKB06N60TATMA1 (Infineon Technologies)

This substitute maintains the 600V voltage rating and D2PAK package compatibility. The device is rated for 12A continuous collector current, which approaches the 13A specification of the main part. Power dissipation is rated at 88W, marginally below the 90W specification. The IKB06N60TATMA1 features Trench Field Stop technology with improved switching characteristics (9ns turn-on delay versus 25ns for the main part). Operating temperature range extends to 175°C, exceeding the main part's 150°C maximum. Product status is active with full RoHS3 compliance. This substitute is suitable for applications where the 12A current rating is acceptable and improved switching performance is beneficial.

IKB10N60TATMA1 (Infineon Technologies)

This substitute provides the highest current rating among the three options at 20A continuous collector current, with 110W power dissipation exceeding the main part's 90W specification. The 600V voltage rating and D2PAK package are maintained. The device combines NPT and Trench Field Stop technology. Operating temperature range extends to 175°C. Product status is active with full RoHS3 compliance. This substitute is suitable for applications requiring higher current capacity or thermal margin. Gate charge and switching energy are elevated compared to the main part, requiring circuit design verification for gate drive compatibility.

STGB6NC60HDT4 (STMicroelectronics)

This substitute maintains the 600V voltage rating and D2PAK package compatibility with 15A continuous collector current, exceeding the main part's 13A specification. Power dissipation is rated at 56W, below the 90W specification of the main part. The device features PowerMESH™ technology with significantly reduced switching energy (20µJ on, 68µJ off) and reverse recovery time (21ns) compared to the main part. Operating temperature range matches the main part at -55°C to 150°C. Product status is active with full RoHS3 compliance. This substitute is suitable for applications where reduced switching losses and faster switching speed are advantageous, provided the 56W power rating is sufficient.

All three substitutes maintain ROHS3 compliance, MSL 1 (Unlimited) moisture sensitivity, and REACH Unaffected status, ensuring regulatory and supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can the IKB06N60TATMA1 be used as a direct replacement for the IRGS6B60KDPBF?

A: The IKB06N60TATMA1 is electrically compatible within the specified parameter ranges. Both devices share the 600V voltage rating and D2PAK package. The 12A continuous current rating of the IKB06N60TATMA1 is marginally below the 13A specification of the main part. Substitution is permissible if the application circuit operates at or below 12A continuous collector current. The improved switching characteristics of the IKB06N60TATMA1 may require verification of gate drive circuit timing.

Q: What are the key differences between the IKB10N60TATMA1 and the main part IRGS6B60KDPBF?

A: The IKB10N60TATMA1 provides higher current capacity (20A versus 13A) and greater power dissipation (110W versus 90W). Both maintain the 600V voltage rating and D2PAK package. The IKB10N60TATMA1 exhibits higher gate charge (62nC versus 18.2nC) and switching energy (430µJ versus 245µJ total), which may impact gate drive circuit design. The extended operating temperature range (-40°C to 175°C) provides additional thermal margin. Substitution is suitable for applications requiring higher current or thermal performance.

Q: Is the STGB6NC60HDT4 suitable for high-power applications?

A: The STGB6NC60HDT4 is rated for 56W maximum power dissipation, which is below the 90W specification of the main part IRGS6B60KDPBF. This device is suitable for applications where power dissipation does not exceed 56W. The advantage of the STGB6NC60HDT4 is its significantly reduced switching energy and reverse recovery time, making it suitable for high-frequency switching applications where thermal management is not the primary constraint.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All substitute parts and the main part IRGS6B60KDPBF use the TO-263-3 / D2PAK package with identical pin configuration (2 Leads + Tab). PCB footprint compatibility is maintained across all four devices. No PCB redesign is required for substitution.

Q: What compliance certifications apply to all substitute parts?

A: All three substitute parts maintain ROHS3 compliance, Moisture Sensitivity Level 1 (Unlimited), and REACH Unaffected status, identical to the main part IRGS6B60KDPBF. Regulatory and environmental compliance is preserved across all substitution options.

Q: Which substitute part is recommended for direct replacement in existing designs?

A: Selection depends on application requirements. The IKB06N60TATMA1 provides the closest electrical match to the main part with marginally reduced current rating. The IKB10N60TATMA1 offers higher current and power capacity for demanding applications. The STGB6NC60HDT4 provides superior switching performance for high-frequency circuits. All three are active products with full compliance certifications, ensuring long-term supply availability.